AutoCAD Inventor :: Assembly Mirror Array
May 18, 2011Is it possible in inventor to make an assembly mirror array? I can't seem to make it keep from just copying the parts. It works OK for circular and rectangular patterns.
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Copy Colors Of Surfaces With Mirror / Array Command?
Oct 30, 2013I have an ipart I'd like to create w/ surfaces. The surface color is important because we use that as plate thickness ID in FEA. When I color a surface blue, then another red I continually get the default color when using the mirror or array command. We're creating a customizeable ipart where there will be some intelligence surrounding how big the array (we may need 3, 4, or 5 beams based on the unit size). I need a way that the colors on the surface propogate to the new surfaces created by the commands.
View 1 Replies View RelatedAutoCAD Inventor :: Parts Do Not Get Constraint In Assembly If Use Mirror
Jun 14, 2012Whenever I am using mirror command in assly . The mirrored part do not get constraint again I have to use the constraint or I have to make that part grounded.
View 4 Replies View RelatedAutoCAD Inventor :: Mirror Skeleton File For New Assembly?
Mar 12, 2012I have used the derive component command to mirror parts many times but each time in the past I have had a desire for that part to be linked to the one I mirrored. I have a new situation where I would like to mirror a skeleton part file that I used on one assembly to make a new assembly.
For example, I used the part attached below to create a stair frame for a steel framed platform I am working on. It consists of geometry, work features, and sketches that represent the nosing line, guardrail, stair stringers, etc.
I have another stair on the other side of the platform that needs to be a mirror image of this one plus a few unique modifications. The new assembly cannot be "linked" to the other one as each of these assemblies needs to be modified independently.
How can I mirror this part to reuse work I have already done without having to create a new skeleton file from scratch? Using the derived part method, then breaking the link makes all of my sketch entities unconstrained.
AutoCAD Inventor :: Mirror A Numbers Of Parts In An Assembly
May 13, 2011How do I mirror a numbers of parts in an assembly.
There is a MIRROR icon but it's fuction is based on COPY.
I would like a MIRROR comand based on PATTERN not COPY.
AutoCAD Inventor :: Assembly Mirror Loses Constraints
Feb 9, 2005I place and fully constrain two components in an assembly them mirror them. To my surprise, the mirror parts are not constrained. I grab them and move them anywhere I want. I closed without saving, reopened and grounded the mirrored components.
View 5 Replies View RelatedAutoCAD Inventor :: Mirror In Assembly Drops Information
Jul 3, 2013Often times when I mirror a sheet metal part in an assembly, several problems occur: The material thickness (in sheet metal defaults) gets reset to the default
Example: My parts are .1875". I mirror one part in the assembly (creating a new part), then when I attempt to create a flat pattern for that part, it doesn't do it right because the thickness in the "Sheet Metal Defaults" is set to .125 (my template default). The "Use Thickness from Rule" check box is NOT checked in my template, but it checks itself when I mirror a part.
The mates completely disappear meaning I have to reconstrain the part.
I have two custom iProperties in my sheet metal template: LENGTH and WIDTH (each set to <SHEET METAL LENGTH> etc.). It retains WIDTH but loses LENGTH, so I have to go manually create a new custom property to get my LENGTH back.
AutoCAD Inventor :: Part Are Not Constrain In Assembly If Use Mirror Option
Dec 6, 2012I am working in assembly .there is lot of similar parts in both side. i want to mirror that part. it was mirror but not constrain.
View 1 Replies View RelatedAutoCAD Inventor :: Export Solid Assembly As Spatial Array For Use In Matlab
May 16, 2012I would like to export a solid assembly (or derived part of the assembly) as a Spatial Array for use in Matlab. Only a simplistic solid definition is needed such that each element of the array is either 1 or 0.
How I can achieve this and ideally how I can choose the resolution of the array?
AutoCAD Dynamic Blocks :: Array With Option To Mirror Or Rotate Over Other Item
Aug 9, 2012I've spent a day and a half coming up with a way to make this dynamic damper block work. Now, I need to fig out how to get every other blade to rotate 90°. I have attached a file with my block and an example of what I need to make it do. I’m running AUTOCAD 2009 LT if you need to know.
View 2 Replies View RelatedAutoCAD LT :: Getting Array Window In 2012 To Open With Array Command?
Sep 30, 2011How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies View RelatedAutoCad 2D :: Use Path Array Feature On 2013 To Array Stairs
Sep 19, 2012I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
Maya Modeling :: Mirror Cut Giving Mirror Very Far From Model
Apr 23, 2013I want to mirror cut the models "selected" portion but it gives me result very far to it which is highlighted with red in the screenshot.
View 1 Replies View RelatedAutoCAD Inventor :: 1:1 Mirror / Different Masses
Jan 8, 2013In the weldment of a crane boom i have different parts. Some are identical, but (1:1) mirrored.ipt. Then I merge them in the BOM in order to set the qty on "2" in the partslist.
Here the error occurs: in the "mass" field in the parts list says "varies".
This keeps me from generating a good partslist and the total mass of the weldment maybe messed up. I personally think it has something to do with the fact that the parts are sheetmetals. i.e when I look atthe Physical properties of the folded / unfolded (of the SAME .ipt) they differ in the same way i see in the BOM.
AutoCAD Inventor :: Convert Weldment Assembly Back To Regular Assembly Template
Jun 6, 2012I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedAutoCAD Inventor :: Creating Separate Assembly Out Of Various Component Parts In Existing Assembly
Jul 10, 2012I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Assembly Has Double User Request At Inserting In Assembly
Sep 18, 2012We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
AutoCAD Inventor :: Tube And Pipe Assembly Styles Don't Translate Into Other Assembly Files
Feb 9, 2012I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
AutoCAD Inventor :: Find Interior Volume Of Assembly By Subtracting Assembly From Block
Apr 23, 2012I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
AutoCAD Inventor :: Place Assembly Constraints With Parameters From Parts In Assembly?
Oct 30, 2012it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
AutoCAD Inventor :: Make Sub Assembly From Parts From Main Larger Assembly?
Oct 31, 2011My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
AutoCAD Inventor :: Translate Assembly Component Using ILogic / Offset From Parent Assembly Origin
Nov 9, 2011I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedAutoCAD Inventor :: Mirror And Flip A Feature
Jun 11, 2013I would like to both flip and mirror (or pattern) a feature onto the opposite side of a rectangular extrusion.
For example (assuming a rectangular solid extruded in the Z dimension), I have two counter bored holes on the top surface of the solid aligned with the X axis and I would like a copy of those holes on the bottom surface but aligned with the Y axis. If I pattern the holes rotating them 90 degrees and then attempt to mirror them, I can only select all four or the two originals. Is there any way to disassociate the rotated copies from the originals while still retaining control over their dimensions from a single sketch?
AutoCAD Inventor :: 3D Mirror Does Not Inherit Part Changes
Jul 6, 2012i am using Autodesk Inventor 2012 to design a pipeline structure. I have a problem when mirroring a 3D sketch with applyed frames. the problem is that if after the mirror operation i edit the original sketch, the modifications are not inherited by the mirrored part of the structure. in particular when i mirror a 3D assembly and edit the original assembly the modifications are made also in the mirrored part but the program does it in a wrong way as long as the constraints are not satisfied and the position of the parts are not the same as the original assembly.
How to mirror an object and preserving the link between the original and the copy in order to make modifications to all the parts mirrored in an easy way?
AutoCAD Inventor :: Mirror Of Extrusion Cut Not Working?
May 17, 2013I cut a curved profile using extrusion and mirrored it about the original plane. But It doesn't cut thoroughly ? there is still a surface of the rarer side of the part ?
the original extrude cut was "Through All".When do the same cut gving a distance...it mirrors perfectly..
AutoCAD Inventor :: Edit Mirror In Sketch
Jan 7, 2013If I create circle and then mirror that cicle in the sketch. How can I then edit that mirror?
When I create pattern in sketch I can edit pattern afterward but cant figure how to edit mirror (except deleting constrains).
Is there way to do it?
AutoCAD Inventor :: Unable To Mirror Solid?
Sep 3, 2013This is a part from an inmported step file. The Inv assembly consists of 1047 part files.
I did the following:
Immediatley grounded all parts in the assembly.Opened the 8 (of the 1047) parts that came through as surfaces, all the rest are solid.
Found missing faces on all of them. I found the most useful tool was to create a series of section planes and do sketches with projected cut edges. Then export the sketches and open in autocad. This way I can see a simple line section view.
I set about replacing the missing faces to get the surface to a solid.After a few attempts I managed what you see below, a solid part in the browser. The part will now mirror as a new solid, but will not join. I have tried mirror as single solid, derive as single solid and combine. All Fail.
AutoCAD Inventor :: Easy Way To Mirror Part
Sep 21, 2011Is there an easy way to mirror a part? I drew this from a sample and need the opposite handing.
View 1 Replies View RelatedAutoCAD Inventor :: Cannot Mirror A Bend In 2014
Jun 22, 2013Inventor 2014 LT / have run into a problem in a throw-away project I"m working on.
A simple example is to create a piece of 3x5x.125 flat bar, add a sketch giving you a bend line and bend the end of it. Now try to mirror the whole thing giving you a 3x10x.125 flat bar bent on both ends.
FWIW: My project isn't this simple - I know I can just make the FB and bend both ends ... this is an example of mirroring a bend not working.
AutoCAD Inventor :: How To Get Constraints While Mirror Components
Oct 25, 2011Am guessing inventor does not allow getting the constraints when you mirror a part..but is there a work around or easy way to copy the constraints.
View 9 Replies View RelatedAutoCAD Inventor :: Unable To Mirror Component
Jul 17, 2013I am attempting to modify a component that I already have. Part of the modifications I am attempting to do involves mirroring some of the part's features. However, when attempting to mirror the component I receive the error message attached to this post: "Select set contains object that cannot be patterned". I have been fooling around with this part and a few others and this appears to be an error message that comes up for mirroring or patterning (circular/rectangular) complex shaped parts. What specifically is the issue here and how can I bypass this error message?
View 8 Replies View Related
