AutoCAD LT :: Getting Array Window In 2012 To Open With Array Command?
Sep 30, 2011How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
ADVERTISEMENT
AutoCAD LT :: 2012 - How To Get Array Window
Apr 28, 2011Just installed CAD 2012 LT...how can i get the array window we use to have on previous editions to work again on this edition? When i used to select array on the ribbon, a window was opening, and i choose what i wanted to do...but now,
No window appear, i tried to follow the command.
AutoCAD Map 3D :: Dialog Box For The Array Command In 2012?
Dec 15, 2011What happened to the dialog box for the array command in Map 3D 2012
View 2 Replies View RelatedAutoCad 2D :: Use Path Array Feature On 2013 To Array Stairs
Sep 19, 2012I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
AutoCad :: How To Make Appear Array-window
Oct 13, 2011when I wanna make an array, i've to make all my choices on the command-line. How can I make appear the array-window, which I used to have in previous autocad versions? is there any variable I have to change? I'm using Autocad 2012 now.
View 4 Replies View RelatedAutoCAD VB :: DWG Preview Like Array Command?
Feb 8, 2012I would like to create userform like command array in AutoCAD.
1) There is a possibility to preview in window on a right side.
2) After clicking the preview commandButton You can preview the drawing on the model space.
I read about ImageView.cls and this article
[URL]
AutoCad :: Use Array Command In 2014?
Oct 28, 2013Im trying to use the array command in lt2014, using the rectangular I can nearly get there apart from where is the old "row offset" and "column offset" buttons gone? If I don't know the offset as its on say louvre blade block by others I just want to snap to 2 points to set the distance. How is this done with the new array command?
View 5 Replies View RelatedAutoCAD LT :: Array 2012 No Contextual Ribbon Menu?
Jun 1, 2012new Array command in 2012...
On a clean install without importing the users settings, the ribbon changes to to the array menu when the command is selected but if we import settings from a previous release it doesnt work.
All the other contextual menus like text editor and hatch menus work fine, seems to be just Array (I guess because its the only new one?)
Is there a way to get it working? I checked CUI and it appears under both Tabs and contextual Tab States, the settings seem the same as the others that are working?
AutoCAD Architecture :: Working Of Array Command
Dec 11, 2011The Array command does not work in the same way like in previous versions and I find it difficult. Also the snap mode does not work propel y when no command is in process and no object is activated.
View 5 Replies View RelatedAutoCAD .NET :: 2012 - How To Edit Associative Array Entity Programmatically
Mar 22, 2012My plan is to edit an Associative array entity Programmatically and I don't know where to start.
Why can't I cast a DBobject to AssocArray ?
something like this?
Dim myarray As AssocArray = TryCast(mydbobj, AssocArray)
Why TypeOf dbobject is BlockReference ?
AutoCAD 2013 :: Turn On Dialog Box On For Array Command?
Jul 3, 2013How do I turn on the dialog box "on" for the array command?
View 2 Replies View RelatedAutoCad :: Block Properties Change With Array Command
Mar 7, 2013Im a user of Autocad 2012 but in the new array command of autocad 2012 , when a block is arrayed the entire array acts as one unit and all the objects in it move together . This can be changed by exploding the arrayed objects and i can move the objects individually but when this is done my block properties are lost...Auto cad renames this block and no longer identifies as my old block.
How can i retain my block properties whilst using the array command in autocad 2012!
AutoCAD Dynamic Blocks :: Array Command And Getting Total Arrayed Value?
Mar 16, 2012Started to play with dynamic blocks now got my head around stretch and tables but I'm looking to use the array command
this is what I want to try to achive
I have a dynamic block which has a array command in it so by simply pulling on the arrow the block will array horizontally giving me multiple items side by side
what I want to do is count the array example if I insert the block and and array to say 12 items side by side then I want to get the value 12 placed into a block attribute which is part of the dynamic block
I can then pull this data out of the drawing into spreadsheet so I can then create a purchase list of items
My immediate thought was to divide the the total length by the width of the item to get me a count but I don't know yet how to get this to work in the dynamic block
AutoCAD Civil 3D :: Array Command Doesn't Work Properly
May 8, 2012previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
AutoCAD Inventor :: Copy Colors Of Surfaces With Mirror / Array Command?
Oct 30, 2013I have an ipart I'd like to create w/ surfaces. The surface color is important because we use that as plate thickness ID in FEA. When I color a surface blue, then another red I continually get the default color when using the mirror or array command. We're creating a customizeable ipart where there will be some intelligence surrounding how big the array (we may need 3, 4, or 5 beams based on the unit size). I need a way that the colors on the surface propogate to the new surfaces created by the commands.
View 1 Replies View RelatedAutoCAD 2013 :: Change Default Setting For Array Path Command?
Jun 13, 2013Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
AutoCad 2D :: Array Along Polyline
Sep 29, 2011I'm curious if there is a way to array objects which are a set distance off of a polyline, along the polyline at a set distance on center. For instance having a circle a 1/2" off of of the polyline, and arraying that circle at 12" on center along the polyline.
View 3 Replies View RelatedAutoCad :: Array Dialogue Box Gone
Oct 23, 2012I'm using AutoCAD 2012 and when I try and start the 'ARRAY' command I do not get the popup dialogue box like in earlier versions. I remember recently having the same issue with the HATCH command, but this was solved by altering the 'HPDLGMODE' setting. I've looked for a similar setting for ARRAY but so far come up with nothing.
Any settings that will revive this dialogue box?
AutoCAD .NET :: Get Each Cell Value Into Array?
Jun 22, 2011I need to get the values(textstrings) of some AutoCAD table cells into a string array, but I am having troubles. I have the proper table and I can get the contents of individual cells using acTable.Cells(1, 1).TextString, etc... but I cannot seem to remember how to get each cell value into an array.
See code below:
For Each acCell As Cell In acTable
If acCell.TextString > Nothing Then
strArray() = acCell.TextString 'Does not work
End IfNext
AutoCad 3D :: Array Along 3D Polyline
Sep 29, 2013I am trying to array a 3d block along a 3d polyline made up of straight plines. I align the block to the end of the endpoint on the 3d polyline ie the path. use array path command.The block does not align properly around the path. I have tried the z direction and selecting no.Attached is a drawing - the strange thing is that path works fine on the red pline but not on the cyan pline.3d Array.dwg
View 4 Replies View RelatedAutoCad :: C3D 2012 - Open And Save As Window Not Showing
Dec 24, 2013I am using civil 3d 2012 when i click open and save as not show a window its show command line choose file <c:folder location like this.
View 3 Replies View RelatedAutoCAD 2010 :: Array Contextual Tab
Mar 14, 2012When I click on an array to edit it the contextual tab does not display. I am able to see other contextual tabs, just not this one.
View 2 Replies View RelatedAutoCAD 2013 :: Array On Two Paths?
Aug 27, 2013Rhino allows for two-rail curves and extrusions, is there anything similar in Autocad2013? I'm working on a trellis that has an undulating, slatted top - I can array the slats along one spline/polycurve, but figuring out how to rotate them to match the secondary angle/curve (it twists) is proving to be really difficult. Rotate3D I have trouble with (crossing different faces/USC which confuses me), and doing so for each slat is going to be exceptionally time consuming.
Is there a way to array a form along two paths, so that the pieces automatically adjust to match the needed angles that both rails define?
AutoCAD 2013 :: 3D Union Array
Jul 22, 2013I have a base(blue) with an array(orange) positioned on a face.
When I select all & UNION the whole geometry becomes orange & I would like it to become blue.Selecting the base first then the array doesn't seem to work.
AutoCAD .NET :: Explode Items In Array?
Mar 28, 2012I'm creating an array using a block from an existing dwg file on my drive. When i import this block on it's own, i can explode it to ownerspace with "bref.ExplodeToOwnerSpace();" but when i'm creating the array, i don't have this ability and i'm left with one of my blocks in the array exploded, and the rest not. How do i explode the blocks in the array? When i try to use acEntClone.ExplodeToOwnerSpace(); it doesn't exist and i only have the option of acEntClone.Explode().
The Original Block
Document acDoc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; LayerTable acLyrTbl;
[Code]....
AutoCAD 2013 :: Copying Via Array
Sep 24, 2012I am currently trying to draw a football stadium and I have copied the seats along the rows by using the array command. When I click on one seat it selects all the seats from the array. Is it possible to just select one seat incase the other stands don't have the same amount of seats?
View 4 Replies View RelatedAutoCAD .NET :: Generating A Large Array
Jun 6, 2012I'm trying to create an array from one block with the option to specify columns, rows, respective offsets as well as angle. The original block comes from a 98kb dmg and is pre-inserted at a specific x,y,z in the model space. The issue I run into is whenever i try to create an array with say more than 200 lines and 200 columns, the machine locks up. It generally will create the array however it can take upwards of 5 minutes.
// Our list of Attributes BlockReference blockRef = bref; AttributeDefinition attDef1 = new AttributeDefinition(new Point3d(0d, 0d, 0d), type, "Type", "", db.Textstyle);attDef1.Invisible = true; AttributeDefinition attDef2 = new AttributeDefinition(new Point3d(0d, 0d, 0d), device, "Device", "", db.Textstyle); attDef2.Invisible = true; AttributeDefinition attDef3 = new AttributeDefinition(new.
[code].....
AutoCad 2D :: How To Trim Entities In Array
Jan 4, 2012How can I trim entities in an array? I can make the array just fine, but I don't know why it won't let me trim them. I suppose it's trying to keep references to the array and the original entity that the array is based off of, but at this point I don't wish to keep that information.
View 5 Replies View RelatedAutoCad 3D :: How To Make Array In Spiral
Oct 19, 2011How to make an array in a spiral?
Without first arraying down, then polar, then deleting the extras?
AutoCad 2D :: Creating Array Around Ellipse?
Oct 12, 2011The path array in 2012 is a very useful addition but I can't crack a solution to creating an array around an elipse (like chairs around a board room table). The only way I've found it to work is to break the elipse and then join up the gap, essentially creating a closed eliptical arc. This gets a result but it seems a very scrappy work-around to something which should simply work.
View 3 Replies View RelatedAutoCad :: Path Array Using An Ellipse
Sep 18, 2011I would like to arrange equally spaced circles around an ellipse. I understand I can do this with the Divide command, as referenced in a previous thread on a similar subject
[URL].......
But I thought I could also use the Path Array command using an ellipse as the path.
What I get is the replicated objects (small circles) following some totally random path. Strange that this happens only with an ellipse - seems to work OK if the path is a circle or spline.