AutoCad :: Path Array Using An Ellipse
Sep 18, 2011
I would like to arrange equally spaced circles around an ellipse. I understand I can do this with the Divide command, as referenced in a previous thread on a similar subject
[URL].......
But I thought I could also use the Path Array command using an ellipse as the path.
What I get is the replicated objects (small circles) following some totally random path. Strange that this happens only with an ellipse - seems to work OK if the path is a circle or spline.
View 9 Replies
ADVERTISEMENT
Sep 19, 2012
I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
View 4 Replies
View Related
Oct 12, 2011
The path array in 2012 is a very useful addition but I can't crack a solution to creating an array around an elipse (like chairs around a board room table). The only way I've found it to work is to break the elipse and then join up the gap, essentially creating a closed eliptical arc. This gets a result but it seems a very scrappy work-around to something which should simply work.
View 3 Replies
View Related
Apr 24, 2012
Path array of a point on spline, I’m wondering why the path array of a particular point on the spline doesn’t force the points to lie on the spline itself!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
Sep 22, 2013
Is there any way to fill inn attributes on individual blocks belonging to an associative path array?
View 7 Replies
View Related
Apr 4, 2012
I have a polyline defining a proposd wind farm access track and I have offset it 10m each side. I have then dreated a slope label between the southernmost end points which gives the existing ground slope at right angles to the centreline. I created the Array (as shown in arrayed.jpg) and it looked good but after hitting enter there were only three labels (after enter.jpg)
I did a rectangular array of slope labels with no problem at all so what's wrong with the way I'm doing the path??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 3 Replies
View Related
Mar 16, 2012
How to array an object with the ARRAYPATH using a polygon as path? I am getting bizarre results.
I am trying to array a block using a polygon as path.
View 7 Replies
View Related
Dec 11, 2012
I have a polyline path and a rhombus. I will like to array the rhombus along the polyline path. As you can see from the attached file, as the object rotates along the path, it shift off the path such that the distance between the rhombus and the path changes esp at the turn. How can I keep this distance between the rhombus object and the path constant?
View 7 Replies
View Related
Jun 13, 2013
Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
View 9 Replies
View Related
Jul 19, 2011
I am creating a set of parametric stairs. All of my constraints are in place for my 2 main work points. I am now trying to make an associative path array to depict the stair treads. Path array works great initially, however when I change my variables for stair height, my stair treads tilt with my work line in such a way that they're no longer parallel to the floor.
The angle of the stairs must be variable as it will change from one set of stairs to another. All that said, I am wondering if there is some variable or command that will make the treads retain their ucs orientation regardless of the angle of my path line. I've tried every option while creating the array with no luck.
View 4 Replies
View Related
Aug 22, 2013
Trick to keeping objects aligned with a helix when using an associative path array? The animation below demonstrates the problem where I can't seem to keep the "treads" on a spiral stairs aligned with the center of the helix. (fewer objects accentuate the problem)
View 3 Replies
View Related
Feb 28, 2011
I am trying to LOFT multiple ellipse shapes along a spline path to create a door handle. But as soon as I choose 1 section, MAX creates the shape. I cannot figure out how to create the shape with multiple cross sections. I have attached a screen shot and a pic of the door handle I want to create.
View 1 Replies
View Related
Sep 30, 2011
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
View Related
Aug 5, 2013
I am trying to create a cylinder. To accomplish this I am creating two ellipses and two lines. After I try to insert them in the DWG dwaing I can see only the lines. Here is a code sniped so you can see what am i doing.
Double ellipseRadiusRatio = 0.4; Vector3d ellipseMajorAxis = new Vector3d(0.0, 1500.0, 0.0);
Vector3d ellipseLeftCenter = new Vector3d(72541.7, 80198.5, 0.0);
Vector3d ellipseRightCenter = new Vector3d(77145.7, 80173.6, 0.0);
Ellipse leftEllipse = new Ellipse();
[Code] ..........
View 5 Replies
View Related
Jan 25, 2013
I need to make an ellipse that's cut in half, and I have no prior 3D experience that's useful to create this shape.
View 9 Replies
View Related
Jan 4, 2014
I'm trying to make a (for lack of a better term) squarish ellipse.
I've tried a few things but they don't work too well, i.e. plines and lofting a rectangle with an ellipse then cutting it two but they just get me arcs that meet at sharp points.
The jpg below is meant to show what I'm trying to do.
I want to take that one quarter of an ellipse at the intersection and stretch/pull it to the midpoint of the line between the corner of the rectangle and the arc. The ellipse is made out of 4 ellipse arcs. I want to stretch just the arc without moving the ends of it at the quadrants.
View 4 Replies
View Related
Jan 16, 2012
how to create ellipse in autocad similar with below image? URL....
View 3 Replies
View Related
May 9, 2013
I have an ellipse with equal radii, I changed it into an arc, but I can't make it fit.
In the attached drawing, there are 3 entities.
1. The original ellipse - red
2. Arc that has the same start angle and end angle as the ellipse - grey
3. Arc that fits the original ellipse - green
Now this is strange, because the ellipse seems to have a different CS for the angles. I had more ellipses in the drawing, but some of them don't have this anomaly.
View 2 Replies
View Related
Aug 8, 2012
Recieved a ACAD converted Microstation File for use in an upcoming construction project. Would like to convert all of the existing ellipses to polylines. Have read several threads that lead me to believe redrawing them is about the only real way to do it. Posting here in hopes of a solution. Drawing contains 127 ellipses, and I dont want to redraw all of them!!
Currently on C3D2012.
View 5 Replies
View Related
Mar 15, 2013
I want to create a new order. when using the order,It will create a ellipse and a DTEXT .I mean the ellipse and the DTEXT are a whole. when move the ellipse the DTEXT will alse move.However, users can edit the DTEXT.
View 9 Replies
View Related
Nov 13, 2011
I'm trying to find a way to inscribe an ellipse into a triangle (not an equilateral triangle), i.e. the ellipse touches the 3 inside sides of the triangle.
View 7 Replies
View Related
Jan 12, 2012
i'm using Autocad2012 now. when i use paste special in objects and give x or y insertion scale. after i do explode that object the arcs are converted in to ellipses and it come with ellipse grips. before 2012 version it won't happen. what's the change in autocad 2012? is there any variable to change?
View 3 Replies
View Related
Mar 15, 2007
I use all my knowledge of technical drawing from school many years ago to produce drawings in AutoCAD 2002, but I can't remember how you would define the dimensions of an ellipse in a drawing so that someone could produce it from the plotted output.
View 9 Replies
View Related
Jul 6, 2013
Is there any Command / Lisp / Parametric way of obtaining a "prospective" ellipse from a set of 5 points?
5 Point Ellipse.png
View 6 Replies
View Related
Oct 8, 2012
I have a database of the 50 stars closest to the Sun. I wrote a program that translates Right Ascension and Declination into X,Y,Z coordinates on the "normal" UCS view.
I created all stars in 3D, distances to scale (1m = 1Ly), stars as spheres 0.1Ly radius (so they are visible !) Now, I need to draw the elliptic trajectory of a rogue "planet", starting near Lacaille8760 (6.456, 7.664, -8.076), passing near the EZAquarii, A, B & C, located at 3.557, 10.268, -2.973, to get a slingshot that will launch the planetoids towards the Sun (0,0,0). The elliptic trajectory should be a 3d "tube" a few pixels dia.
Problem:
How to set the screen coordinates to the plane formed by the 3 points above, so the ellipse can be drawn on a plane ? I changed the UCS to 3 points, and the screen shows the three stars on the same plane, but when drawing the ellipse, it is to the original UCS...
I'll make the ACAD files available for download at [URL]...... "TECH" tab. Once created, the drawing is used in R14 format to be imported in 3DSMax8 to get easier views and animation.
View 0 Replies
View Related
Feb 14, 2013
I'm having difficulty with a sheet metal part creating a flat pattern for it. The shape is an ellipse with the dimensions shown in the second picture. When I attempt to create a flat pattern it just shows the side of the part. The sheet metal defaults are correct for the part and it was ripped to created a base point for the pattern. I need to create a DXF for manufacture. I would just use the flat pattern it gives me and mirror it twice to create a pattern but it doesn't factor in the radius of the part. How to create a correct flat pattern for this item?
View 5 Replies
View Related
Oct 12, 2012
Okay so is there anyway to enter the whole equation of an ellipse into autocad and it will map it? ex x^2/a^2+y^2/b^2+z^2/c^2=1 with different values for x y z a b c. I want to generate different ellipses and then loft them together?I just want one the starts with the basics and goes all the way to the move advance stuff.
View 3 Replies
View Related
Jul 7, 2011
Is it possible to find this center of ellipse by drawing, not mathematically by equation/formula?
View 9 Replies
View Related
May 9, 2011
I am trying to create a 3D elbow that is Ellipse at one end and is circular at the other.
I've attached and example of what im trying to make.
Elbow.jpg
View 5 Replies
View Related
Nov 29, 2013
I know that stretch will not affect major or minor radius of an ellipse in dynamic block.
What I would like to be able to do is use properties of an ellipse and some kind of parameter to be able to affect values in properties.
I know how to get ellipse radii data out of a block, but I simply cannot find a way to get them back in...
Is there a way to link field data back to block...?
View 2 Replies
View Related
Feb 3, 2012
Is there a way, using dynamic blocks, to rotate a line around an ellipse, so that that leader is always centered with the center of the ellipse, but it actually starts at the circumfrence of the ellipse.
Like with a circle, you choose, rotation, using the center of the circle as the base point, and then setting your radius, and choosing the 'rotate' action. I need to do basically the same thing, but with an ellipse.
View 5 Replies
View Related
