AutoCad 3D :: 3D Pipe Elbow - Ellipse To Circle
May 9, 2011I am trying to create a 3D elbow that is Ellipse at one end and is circular at the other.
I've attached and example of what im trying to make.
Elbow.jpg
ADVERTISEMENT
AutoCad :: Joining Lines / Ellipse Arcs And Circle Arc?
Jul 13, 2007 how to join line or polylines with ellipse arcs or circle arcs and now.. I give up! Here is my problem: What I would like to draw can be compared with a pear: a succession of circle arcs ellipse arcs and maybe polylines. Once the profile done, I was planning to use REVOLVE or (EXTRUDE + FLLET) to finish my drawing... the problem is that I can't join 2 ellipse arcs from different ellipses (which means neither with a circle arc. How would you proceed to draw a pear?
PS: I'm using autoCAD 2006 z.54.10 version
GIMP :: Text Around Arc / Ellipse / Circle
Sep 5, 2011I'm trying to put a text around a circle / arc.
I'm able to create an ellipse with the select tool, create a path from it and then add a text "along the path". Unfortunately I can't specify on what position of the arc/ellipse the text should start (left-upper corner, middle, right upper corner, etc.).
Illustrator :: Ellipse Inside A Circle With No Overlapping Paths?
Jul 25, 2012I'm trying to draw a circle and an ellipse so that the ellipse shares exactly two points of contact between the two paths (not centered).
This is seemingly impossible with the tools provided since, if you draw an ellipse normally, with the anchor points of the ellipse on the circlular path, there are four points of contact, which means the two paths overlap.
I've tried revolving a line segment that goes from the edge of the circle to the middle of the circle (not center) with similar results.
Drawing the ellipse first doesn't work either.
Astute Graphics has a plug-in, Subscribe that would almost work, except it only draws circles, not ellipses.
Am I overlooking someting extremely obvious, or am I correct to say that illustrator can't do this? I'm using CS5. Maybe this is something that is fixed in CS6 with a snap to path option?
Lightroom :: Radial Filter Not Displaying The Circle Or Ellipse?
Dec 11, 2013I have been using the radial filter with no problems.Now it will not display the circle or ellipse. it seems to be working as when I try to do the circle and it will not show but if I change the exposure or any of the setting it does do that.
Have I accidently changed something or a setting to cause this .
Photoshop :: Draw Circle With Ellipse Tool - How To Add Vector Mask
Jul 18, 2013I would like to draw a Circle with the Ellipse tool and then add a Vector Mask
next i would like to Duplicate the layer and then select the Vector Mask Thumbnail in the layers panel so that when i select the Pen tool the Intersect Shape Areas is available
however, i cannot seem to get the Vector Mask to be available it is always grayed out no matter what i try to do.
i am trying to add a "glossy" effect to the circle by using the Pen tool to draw a shape through it horizontally and then up and around the top of and joining/closing it so that i can add a white>trans gradient.
Using Ps cs6 and Windows 7
Paint.NET :: Drawing Perfect Letter O - Placing Ellipse With The Circle
Jan 29, 2014I'm making a logo for someone by hand-drawing a font I made up. But because I was having trouble drawing a perfect letter 'O', I'm using the "Circle/Ellipse" tool to do it. I drew an 'O' with that tool that's almost the right size... and I wanna draw another one just a little shorter... but I can't figure out how to place the completed new shape directly over the old one.
I don't know where to start the action with the tool! The completed shape always ends up in the wrong place. How to get my finished shape to complete just where I want it to? (Re-sizing the shape won't work because that changes the thickness of the line I used for the letter 'O'.)
Illustrator :: How To Snap A Circle Created With Ellipse Tool To Grid
Feb 23, 2014I'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?
AutoCad 2D :: Orthographic Projection Of Rotate Elbow?
Sep 11, 2013the image above is a piping layout with two 45 degrees elbows. i drew the side view, then the the top view
now one of the 45 degrees elbow is replaced by a 90 degrees elbow. i don't how to draw this because the 90 degrees elbow rotate 45 degrees from the horizon.
AutoCAD 2010 :: Modeling Reducing 90 Degree Elbow?
Jan 25, 2012I am having trouble 3d modeling an 8" to 6" reducing elbow.
View 8 Replies View RelatedAutoCAD Inventor :: How To Make Mitered Elbow From Cylinder
May 31, 2012How to make a Mitered Elbow from a cylinder this is driven by our Manufacture they would like to roll a sheet of metal and have a stitch cut within the rolled sheet so they can then just cut the additional amount of material between the stitches to get two identical mitered elbows from one piece of rolled sheet metal. Please see the attached doc. to see what I'm trying to do.
Inventor Professional 2011
Vault Professional 2011
Windows 7 64-bit
Intel(R) Xeon(R) W3530 @ 2.80GHz processor
NVIDIA Quadro FX 3800 graphics card, 15G RAM
AutoCAD Inventor :: Calculate Volume In Elbow For Liquid
Nov 4, 2013Is it possible to calculate the volume in this elbow for liquid?
View 1 Replies View RelatedAutoCAD Inventor :: Custom Elbow That Has Angle Of 89° In The Tube
Sep 10, 2013I have a custom elbow that has an angle of 89° in the tube and pipe author dialog but I cannot select it in the tube and pipe style in the "elbow custom" field where the filter properties are 45° to 90°. I can select it as the standard elbow though where the filter properties are 90° to 90°. This doesn't make any sense. All the other filter properties (grayed out) are the same.
.
IV2013
AutoCAD Inventor :: Unable To Unfold Sheet Metal Elbow
Oct 6, 2011I'm looking to unfold the attached sheet metal elbow and am unable to do so. After modeling the part I was also unable to rip an opening to split the part. I opted to cut an opening with a profile, but I am still unable to unfold the part. The probelm is likely obvious and I believe it is because I used part splits to create the different sections.
View 2 Replies View RelatedAutoCAD Inventor :: Add In A GOST Elbow 90deg A Few New Lines With Dimensions
Jan 20, 2012Is there any opportunity to make changes in standard library in Autodesk Inventor 2010? For example I want to add in a GOST Elbow 90deg a few new lines with dimensions. The smallest Elbow is with DN40, and I need DN20 DN 25 DN 32.
Or Is there Just Two ways - to make my own Elbows, or copying standard Lab and then making changes?
AutoCAD Inventor :: Generating An Elbow On Metal Part Drawing?
Oct 17, 2012how to create the elbow part of a metal type ( actually a J-shape Bolt Threaded material) .
I had finished the straight part by simply revolving my required profile. then i was to draw the elbow part but "sweep" doesnt work out
AutoCAD Inventor :: Draw Sheet-metal Elbow With (t) Junction
Sep 5, 2013How to draw this junction on the Shet metal Elbow that i have create, i am sending what i have made so far and the 2d of what i need. My version of the Inventor is 2013.
View 4 Replies View RelatedAutoCAD Inventor :: How To Flatten Elbow Like Sheet Metal Development
Oct 30, 2012I have an elbow with a slit on the other side and would like to use Flatten feature in sheet metal. How do I do it? I tried but an error pops-up, what does it mean.
I have attach the file.
AutoCAD Inventor :: Flat Pattern Of 45 Degree Standard Elbow
Jun 19, 2013I am using 2013 inventor. I tried to make flat pattern from the standard 45 deg elbows have thk 0.237" and 4" dia.
But I am not able to do it. I need to give this pattern to my welder to cut 45 deg elbows from 90 deg elbows.
Please find attached part.
AutoCAD Inventor :: How To Draw Segment Elbow 90 Degrees And Create Flat Pattern
Jan 16, 2013I would like to know how to draw segment elbow 90 degrees ( segments are not equal ) and create Flat Pattern for each of the segments - using sheetmetal in Autodesk Inventor?
View 9 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Storm Sewer Pipe Plan View
Nov 20, 2013Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedAutoCAD Civil 3D :: Edit Pipe Network - How To Trim Pipe That Pass Through Manhole
Sep 25, 2012I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedAutoCAD Inventor :: Existing Pipe Route To Create A New Pipe Run And Place It Into New Run?
Mar 6, 2013Is there a way in inventor if you have an existing pipe route to create a new pipe run and place that existing route into the new run.
View 3 Replies View RelatedAutoCAD Civil 3D :: Depicting Both Slice And Cross Cut Pipe Profiles Of One Pipe
Jan 8, 2014One of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Include Pipe Min / Max Cover As Part Of Str / Pipe Label
Nov 26, 2013is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCad :: Pipe Cutting Template - How To Unwrap Pipe Into Flat Section
Dec 27, 2003I have these two pipes, one is 4" diameter (running horizontally) and the other is 6" diameter running at a 30degree from horizontal angle. eventually the two hit, and at that intersection I need to make the 4" pipe join to the 6"' pipe, which then continues on its merry way farther down the structure. So I can extrude the two pipes, and I can even make a union and then remove the excess of the 6" pipe, because what I am really looking for is: a cutting diagram for the joint where the remaining 4" pipe hits the 6" section. A cutting diagram for the short piece of a Y joint.
I can make this image appear on my screen, but I am then stumped as to how to unwrap the pipe into a flat section so that I can see the curvature of the cuts required in planar view, for the real pipe that I have on my shop floor.
AutoCAD Inventor :: Create Pipe Route Using The Tube & Pipe Run
Jul 26, 2013I'm trying to create pipe route using the tube & pipe run. And its not constrained when I try to drag away. I tried grounding the components which is not working either. since the routing opens in 3dsketch its kinda tricky to make it fully constrained.
View 2 Replies View RelatedAutoCAD Civil 3D :: Connecting Pipe To Different Pipe Network Structure
Jun 20, 2012Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View RelatedAutoCad :: Find Center Of Circle Tangent To Another Circle And Point On A Line
Dec 18, 2011I need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedAutoCad :: Drawing A Circle That Is Tangent To Another Circle And Passes Through Endpoint
Apr 28, 2013I was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies View Related3ds Max :: How To Rotate Joint Hip Or Elbow
May 24, 2012I am new to the forum and in 3dsmax.
I was building some picture about a dummy using gym equipment (for example a leg extension) and I started with Daz studio pro; but working I understood I needed a software to build the equipments (there are only a few libraries) this is why I decided to use 3dsmax. Now i tried to import the dummy builted in Daz in 3ds, using the .obj export function.
the truble is: if I export the 3dsmax's design I creatd as .obj, I daz I can't see colours; if I import the dummy builted in Daz as .obj, in 3ds max I am not able to rotate joint (for example hip or elbow) because it removes the arm without rotating it (for example I would like to make the dummy held a rope).
