the image above is a piping layout with two 45 degrees elbows. i drew the side view, then the the top view
now one of the 45 degrees elbow is replaced by a 90 degrees elbow. i don't how to draw this because the 90 degrees elbow rotate 45 degrees from the horizon.
I am new to the forum and in 3dsmax.
I was building some picture about a dummy using gym equipment (for example a leg extension) and I started with Daz studio pro; but working I understood I needed a software to build the equipments (there are only a few libraries) this is why I decided to use 3dsmax. Now i tried to import the dummy builted in Daz in 3ds, using the .obj export function.
the truble is: if I export the 3dsmax's design I creatd as .obj, I daz I can't see colours; if I import the dummy builted in Daz as .obj, in 3ds max I am not able to rotate joint (for example hip or elbow) because it removes the arm without rotating it (for example I would like to make the dummy held a rope).
I'm trying to make a FK arm with the ability to stretch in Max 2012, but as soon as I assign an orient constraint to the elbow, the stretch ability disappears.
The file consists of two bones, two spline controllers, and an expose transform. The upper arm bone is orient and position constrained to the shoulder controller spline. The exposed transform reports the distance between the elbow spline controller and the upper arm bone. The lower arm bone, has a "Float Script" on the X Position transform and it takes the distance reported in the exposed transform to adjust its position relative to the upper arm bone.
If I select bone_elbow and assign an orient constraint, the "Float Script" on the position stops working, but the rotation works.
(I'm trying to keep the controllers out of the heirarchy of the bones because our game engine will export them and I'm trying to avoid that)
I am trying to create a 3D elbow that is Ellipse at one end and is circular at the other.
I've attached and example of what im trying to make.
Elbow.jpg
Also which view should I use as the top view?
Engineering Graphics Object.jpg
I'm remaining with the orthographic projects of the object [see image] and the project is due some time next week. I'm having a hard time drawing the orthographic projections.
I use AutoCAD 2009.
I am having trouble 3d modeling an 8" to 6" reducing elbow.
View 8 Replies View RelatedHow to make a Mitered Elbow from a cylinder this is driven by our Manufacture they would like to roll a sheet of metal and have a stitch cut within the rolled sheet so they can then just cut the additional amount of material between the stitches to get two identical mitered elbows from one piece of rolled sheet metal. Please see the attached doc. to see what I'm trying to do.
Inventor Professional 2011
Vault Professional 2011
Windows 7 64-bit
Intel(R) Xeon(R) W3530 @ 2.80GHz processor
NVIDIA Quadro FX 3800 graphics card, 15G RAM
Is it possible to calculate the volume in this elbow for liquid?
View 1 Replies View RelatedI have a custom elbow that has an angle of 89° in the tube and pipe author dialog but I cannot select it in the tube and pipe style in the "elbow custom" field where the filter properties are 45° to 90°. I can select it as the standard elbow though where the filter properties are 90° to 90°. This doesn't make any sense. All the other filter properties (grayed out) are the same.
.
IV2013
I have a 2D drawing in model space that is set on the front orthographic view. If you change it, using the viewcube, to "top", the drawing appears as a straight line because it is now looking at a top view of the 2D drawing. How can I change it so that the top view will display the whole drawing?
View 2 Replies View RelatedHow to get orthographic views from a 3d model?
View 9 Replies View RelatedI have a finished 3D model in AutoCAD (although I did import it from another program), and I want to create the standard orthographic views as easily as possible. This tutorial looked perfect [URL].........
but i ran into some trouble. At step 5, where it says to press Base or use the command VIEWBASE i get a window that will ask me to open up some kind of inventor file. The tutorial does not acknowledge this, but the rest of the instructions and result seem like just what I need!
the first 12 seconds, where he took a 3D model and created 3 other views with just a click.
I know it's a plugin but is there a way for AutoCAD to do this as well? It would make life so much easier for me.
I'm looking to unfold the attached sheet metal elbow and am unable to do so. After modeling the part I was also unable to rip an opening to split the part. I opted to cut an opening with a profile, but I am still unable to unfold the part. The probelm is likely obvious and I believe it is because I used part splits to create the different sections.
View 2 Replies View RelatedIs there any opportunity to make changes in standard library in Autodesk Inventor 2010? For example I want to add in a GOST Elbow 90deg a few new lines with dimensions. The smallest Elbow is with DN40, and I need DN20 DN 25 DN 32.
Or Is there Just Two ways - to make my own Elbows, or copying standard Lab and then making changes?
how to create the elbow part of a metal type ( actually a J-shape Bolt Threaded material) .
I had finished the straight part by simply revolving my required profile. then i was to draw the elbow part but "sweep" doesnt work out
How to draw this junction on the Shet metal Elbow that i have create, i am sending what i have made so far and the 2d of what i need. My version of the Inventor is 2013.
View 4 Replies View RelatedI have an elbow with a slit on the other side and would like to use Flatten feature in sheet metal. How do I do it? I tried but an error pops-up, what does it mean.
I have attach the file.
I am using 2013 inventor. I tried to make flat pattern from the standard 45 deg elbows have thk 0.237" and 4" dia.
But I am not able to do it. I need to give this pattern to my welder to cut 45 deg elbows from 90 deg elbows.
Please find attached part.
I am currently attempting to dimension to a spline in an orthographic drawing and running into some issues. I can't seem to find a way to properly dimension rather than making microscopic holes in the piece and that way giving the .idw something to grab on to for dimensioning.
View 2 Replies View Relatedi'm wondering how to get orthographic views isometric view (with some dimentions) from an object ive already assembled with proengineer (student).
View 1 Replies View RelatedI am having an issue running AutoCAD LT 2011 on a Windows 7 Pro 64-bit. If I have orthographic dimensions on the drawing, AutoCAD crashes if I try to move, modify, or delete the dimensions. Recovery does not work. I am stuck with the dimensions once they are placed because if I touch them, the program crashes.
I do not know if this is important but I will include it anyway: this does not happen with older drawings that were created under older versions of AutoCAD LT. It only happens with ortho dimensions created in LT 2011.
I have applied all the latest patches, drivers for the video card, and even tried opening the drawings in 32-bit mode. Nothing seems to work.
My system is a Dell Precision T3500 Windows 7 Professional SP1 64-bitIntel Xeon Dual Core 2.53GHz cpu12GB ramNvidia Quadro 4000 running Nvidia driver version 265.70
i ve noticed that when i switch to orthographic view i cannot render the view. i have only black render output. how to make a render in say top view or front?
View 1 Replies View RelatedWhen I have two windows open and one of them is an orthographic view, the cursonr changes from tri-color to white in the orthographic view.
Is there a way to force the cursor to stay colored in the orthographic view?
I would like to know how to draw segment elbow 90 degrees ( segments are not equal ) and create Flat Pattern for each of the segments - using sheetmetal in Autodesk Inventor?
View 9 Replies View RelatedI am trying to draw an isometric version of this part from first angle orthographic projections. But for the life of me I can't, I have never been good at nets / pr Attachment ortho to iso.jpgojections etc.
View 9 Replies View RelatedI'm getting:
"Displacement is ON and set to view-dependent, but the view being rendered is orthographic. View-dependent displacement does not work with orthographic views."
After using ONE orthographic camera in a scene, however I am no longer using that Camera and still receiving the error. What should I do?
Should I put elbow FK orient wieght 0 or 1 and vice-versa.
View 2 Replies View RelatedIs there a way to set a precise orthographic view - such as at 45 degrees. I need to render objects and take them into another application to dimension them so a set angle would be very useful.
View 1 Replies View RelatedAs far as I can tell, there is no way to switch back and forth between perspective and orthographic projection on an existing camera?
View 1 Replies View RelatedSome time ago i used express tools to save my sysvar settings and now when i read the old settings back in, i'm put in 3D parallel project mode. I know this because i have the background color for this mode set to something other than the background color for 2D model space. But now i can't get out of 3d parallel projection mode.
View 3 Replies View Related