I'm getting:
"Displacement is ON and set to view-dependent, but the view being rendered is orthographic. View-dependent displacement does not work with orthographic views."
After using ONE orthographic camera in a scene, however I am no longer using that Camera and still receiving the error. What should I do?
Is there a way to set a precise orthographic view - such as at 45 degrees. I need to render objects and take them into another application to dimension them so a set angle would be very useful.
View 1 Replies View RelatedI have a finished 3D model in AutoCAD (although I did import it from another program), and I want to create the standard orthographic views as easily as possible. This tutorial looked perfect [URL].........
but i ran into some trouble. At step 5, where it says to press Base or use the command VIEWBASE i get a window that will ask me to open up some kind of inventor file. The tutorial does not acknowledge this, but the rest of the instructions and result seem like just what I need!
As it is possible to import 3D objects in PS... And display it in outline in an orthographic view, I'm wondering how to print this view at scale 1:1 of the model size...
and not the size of the image file defined in pixels. AS a workaround is it possible to export that view in vector format to edit and print in Illustrator or Acrobat.
i'm wondering how to get orthographic views isometric view (with some dimentions) from an object ive already assembled with proengineer (student).
View 1 Replies View RelatedWhen in Orthographic view and in back, left, right, top, bottom, front view, I cannot draw an object as Cube by example. To be able to make the object I have to move a little bit my view .
Example. If I was in Ortho - Back view, I move the view a bit so it is not perfectly on the back view than it allowed me to draw object. Another way is to change to Perspective view.
why I cannot make object on straight orthographic view?
i ve noticed that when i switch to orthographic view i cannot render the view. i have only black render output. how to make a render in say top view or front?
View 1 Replies View RelatedWhen I have two windows open and one of them is an orthographic view, the cursonr changes from tri-color to white in the orthographic view.
Is there a way to force the cursor to stay colored in the orthographic view?
Also which view should I use as the top view?
Engineering Graphics Object.jpg
I'm remaining with the orthographic projects of the object [see image] and the project is due some time next week. I'm having a hard time drawing the orthographic projections.
I use AutoCAD 2009.
I have a 2D drawing in model space that is set on the front orthographic view. If you change it, using the viewcube, to "top", the drawing appears as a straight line because it is now looking at a top view of the 2D drawing. How can I change it so that the top view will display the whole drawing?
View 2 Replies View RelatedHow to get orthographic views from a 3d model?
View 9 Replies View RelatedAs far as I can tell, there is no way to switch back and forth between perspective and orthographic projection on an existing camera?
View 1 Replies View Relatedthe first 12 seconds, where he took a 3D model and created 3 other views with just a click.
I know it's a plugin but is there a way for AutoCAD to do this as well? It would make life so much easier for me.
the image above is a piping layout with two 45 degrees elbows. i drew the side view, then the the top view
now one of the 45 degrees elbow is replaced by a 90 degrees elbow. i don't how to draw this because the 90 degrees elbow rotate 45 degrees from the horizon.
I am currently attempting to dimension to a spline in an orthographic drawing and running into some issues. I can't seem to find a way to properly dimension rather than making microscopic holes in the piece and that way giving the .idw something to grab on to for dimensioning.
View 2 Replies View Relatedrecently i tried working with the modeling toolkit in maya 2014, and it works great in perspective,but for some reason when im in component mode and I try and make a marquee selection, the marquee does not show up although it does select the component.
After selecting some component and try moving then with the translate handles, it does not move at all, instead it deselect the components.I am able to middle click move components.
So i decided to turn off the modeling toolkit and everything worked fine with the classic manipulators.
I am having an issue running AutoCAD LT 2011 on a Windows 7 Pro 64-bit. If I have orthographic dimensions on the drawing, AutoCAD crashes if I try to move, modify, or delete the dimensions. Recovery does not work. I am stuck with the dimensions once they are placed because if I touch them, the program crashes.
I do not know if this is important but I will include it anyway: this does not happen with older drawings that were created under older versions of AutoCAD LT. It only happens with ortho dimensions created in LT 2011.
I have applied all the latest patches, drivers for the video card, and even tried opening the drawings in 32-bit mode. Nothing seems to work.
My system is a Dell Precision T3500 Windows 7 Professional SP1 64-bitIntel Xeon Dual Core 2.53GHz cpu12GB ramNvidia Quadro 4000 running Nvidia driver version 265.70
I am trying to draw an isometric version of this part from first angle orthographic projections. But for the life of me I can't, I have never been good at nets / pr Attachment ortho to iso.jpgojections etc.
View 9 Replies View RelatedI was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View Relatedhow to create a section view for a pond other than quick view.
View 2 Replies View RelatedI have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies View RelatedI am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies View RelatedI was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies View Relatedi have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View Related