Some time ago i used express tools to save my sysvar settings and now when i read the old settings back in, i'm put in 3D parallel project mode. I know this because i have the background color for this mode set to something other than the background color for 2D model space. But now i can't get out of 3d parallel projection mode.
View 3 RepliesI have drawn a 2D sketch (of a wind turbine) and I found it easier to just rotate the drawings of the blades out of the plane of the drawing to get something that looks like an isometric view. So now some parts of my drawing are in plane, and other parts are turned out of plane by like 35 degrees, so looking at it from the top it looks like an isometric view of the turbine.
However, now I have a task to have the same drawing but with gradient filling in the turbine itself as well as the air and water in the background. The easiest way to do this would be to somehow get a 2D projection drawing of what I see when I look at the plane from the top. (see attached picture)
So what I need is to get what is called "Top View" in the picture with all lines being in-plane from the out-of-plane drawing shown on the right.
how to change the projection to third angle projection for ALL of my drawings in Inventor 2010?
View 9 Replies View RelatedHow to get the “text” or “block” parallel to a particular line?there is more than one way to alight the text with a particular line but wondering if there might be more powerful tools to do so.
“Rotate” and “Align” are possible commands to align the text with particular line. Parallel constrain is another option to do so but will make the drawing “busy” with additional parameter.
Equally, what if I need to make a block parallel to a particular line? In this case, the “parallel constrain” doesn’t work! Just I may take the advantage of “rotate” and “align”..What I wanted to know if there is a more brilliant way to get the“text” or “block” PARALLEL to a particular line with a smart tool.
In a drawing, the directions aren't pointing at a 90-degree angle with relation to the command ribbon above it. It's rotated a little clockwise, as are the crosshairs. How do I get the crosshairs and viewcube to be parallel with the command ribbon? I don't need to rotate any objects in the drawing, but I think this is messing up what I see in my viewports in the layouts.
View 9 Replies View RelatedLisp routine or macro that will either rotate or align selected objects so they are parallel to an axis on the current UCS?
Specifically, when placing mtext to label an object. I typically align my ucs to the object then create the text so it is parallel to the object. It would be great if I could create the text with a rotation of 0, align my ucs to the object to be labeled and then with a single click, select the text making it parallel to the X axis.
I just ran into a projection issue with a couple of AutoCAD files. There is a possibility that one of the files was originally in Microstation and in meters before it was converted to AutoCAD but I'm still trying to confirm this now. The problem that I am running into is that AutoCAD Map doesn't allow you to xref or attach other CAD files and use different projections. I have one file in Maryland State Plane, Feet and a second one which appears to be in Meters and I can't get them to overlay or for the file in meters to come in at the right location when it is xrefed.
View 7 Replies View RelatedIs there any way to project feature lines into a profile when the plan view is xref'd? I have my plan view "existing topo" with all existing features/Figures and a existing surface.
My profile is a separate dwg with plan view xref'd and surface a data shortcut. Of course there are feature lines and Survey Figures in the existing top I want to project into the profile, but can't because it is an xref. Besides copying .
if i have one feature line i want to project to all sections in a sample line group it would seem you should be able to pick the one line and assign in a label style and you would be done quick and easy. instead if you pick the multiple projection option you get this percentage distance box and it tend to grab stuff you don't want.
View 2 Replies View RelatedIf there a way to display the projection of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort?
View 3 Replies View RelatedIs it possible to read the current setting for drawing projection (1st or 3rd angle) from the style library associated with the currently open drawing file (idw)?
View 2 Replies View RelatedIs there a way to create a coordinate system which will have a projection with a shift grid. I want to create a coordinate system with a seven parameter datum transformation an a trnsverse Mercator projection in whichi want to use a shift grid file
View 8 Replies View RelatedWe use Acad map 3d 2012 & civil 3d 2012. We also use Arcgis10.2 and have not seen this problem until one of our contractors (using map 3d 2013) sent us his drawings. When we bring in the map 2013 drawing Arcgis does not recognize the projection assigned to the drawing and our data ends up thousands of kilometres off in the distance. Am I missing something...it always works fine for 2012 drawings.
View 2 Replies View RelatedI am having difficulty projecting an existing feature line at a specified tie-in slope. I have a steep (3:1) feature line that I need to project at a specific slope (2.5:1)to intersect a surface model. When I create the grading object the generated grading object is not 3:1 along the feature line and 2.5:1 perpendicular to the feature line. Instead I am left with a new slope that is 1.9:1 between the generated contours. I have attempted slope to surface as well as slope for a distance.My design criteria is to not exceed a 2.5:1 tie-in slope.
View 1 Replies View RelatedCan I define a projection system in drawing template file(dwt).If yes then how?
View 1 Replies View RelatedI've designed a flat pack chair in model space...now I'd like to print all the various bits of this chair so that I can transfer the measurements easily onto a plywood board (to build the chair from scratch). I don't have a plotter, but my Canon MP610 can print in poster mode where large drawings can be printed onto a grid of several A4's - e.g. 16 sheets of A4's arranged on a grid 4x4 - enough to print the biggest part of the chair scaled 1:1.
View 9 Replies View RelatedI found this image in a textbook and it's supposed to be a three view first angle projection of the boat. It looks like main view is a plan view (top).
What confuses me about this is that the left view, looks like it's of the left side. But only third angle projections order views this way (left view being of the left side, top view being of the top, right view being of the right). So is this picture a first angle projection or a third angle? Or is it all together wrong?
I have a problem i want render a image in axonometric projection specially in "dimetric trimetric".i I find this [URL]...... but has only axonometric isometric.
I mean what angle(x,y,z) i must put on the camera setting.
How can I make a section plane and the respective projection in autocad mechanical? The following link will explain you what i want to do. [URL] ......
View 3 Replies View RelatedI've got a 3d model and I'm creating ortho views by using the solid profile command. Which is nothing out of the normal, but the projection lines comming off my 2d image is.
Is there any way to get rid of the projection lines?
the image above is a piping layout with two 45 degrees elbows. i drew the side view, then the the top view
now one of the 45 degrees elbow is replaced by a 90 degrees elbow. i don't how to draw this because the 90 degrees elbow rotate 45 degrees from the horizon.
i am located in Greece and the current progection is GGRS87 .
before the GGRS87 we had a system named HATT with the folowing info:
maps 1/5000 based on the Bessel ellipsoid (1841)
i have many drawings with point coordinates in the old system. is there a way to transform them in the new projection?
what else info is needed for the transformation.
I wish to display an Assembly as a Drawing.
However when the Base view is created it also displays surface geomerty created for referencing.
I attach a PDF which shows this.
Even though these are hidden in the respective Part files, they keep showing up in the Drawing and I cannot find a way to hide them. How to stop this from happening? BTW I am using Inventor 2013.
I made this part, which is a loft consisting of five symmetric squares. I plan on laser cutting each side, which would be exactly the same.
I can't seem to figure out how to make a flat projection of one of the sides. I have tried in sheet metal, but I don't use that feature in my line of work.
Installed 2012 Map and went to assign the projection, and nothing was available, Reinstalled, No Change...
View 2 Replies View RelatedJust by selecting a bend line on the flat pattern, I'd like to draw only 2 lines on a sketch (without any border projection, only points) at both ends of the bend line.
I'm sure it can be done via VBA, but don't know how to start for it.
I am re-routing a small stream. I am using generic links for the bed and side slope. I whant the side slope to be 3:1 and project beyond the existing culvert wall in the eg model. can this be done easily?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
I have started to use CIVIL3D 2007 instead of LAND-DESKTOP 3.
My question is: When I used LDD I created a surface, then drew a polyline and by right-clicking chose "Project object".
This option produced many new points along my polyline which I used for my design.
When I tried this with CIVIL 3D I couldn't find this option.
I can create a quick profile, however, this is not good for me because I need the data as a collection of points with coordinates & elevation, and not as an image.
Is there any way to produce a projection on a surface (from a polyline)?
Or getting some information from the quick profile in the way I need?
Is it possible to create projection views of a solid model part? I want to make a front, top and right side view of the part in solid model form all on the same part file. I thought I could copy the part in each view but "help" says I can't copy a solid model.
View 4 Replies View RelatedI have a .dwg file with an AT-LCC projection assigned to it. There are some .shp files connected to it.
Can I choose the projection of to-be-imported-points when I import some laserscan-files in ASCII format? So I can tell AutoCAD: these points are in MGI-AT.AUT-Central/GK projection, please convert them to my desired projection.
There is a method which takes much too long:
open a new document assign the origin-projection (here; MGI-AT.AUT-Central/GK) to the fileimport the pointsexport the points as .shp file, define a projection-system conversion to target projection (here: AT-LCC)open the file with the target projection assigned to it (here: AT-LCC)import the .shp file
Currently, in our project, we convert autocad model by FBX convertor and load it by separate graphic library(directx or openGL) and then render the model from a specific camera point to get a customized view(image).
Now, I was just wondering if it's possible to create this custom image through autocad .Net api, since the model is already rendered by cad?