AutoCad :: Joining Lines / Ellipse Arcs And Circle Arc?
Jul 13, 2007
how to join line or polylines with ellipse arcs or circle arcs and now.. I give up! Here is my problem: What I would like to draw can be compared with a pear: a succession of circle arcs ellipse arcs and maybe polylines. Once the profile done, I was planning to use REVOLVE or (EXTRUDE + FLLET) to finish my drawing... the problem is that I can't join 2 ellipse arcs from different ellipses (which means neither with a circle arc. How would you proceed to draw a pear?
PS: I'm using autoCAD 2006 z.54.10 version
View 7 Replies
ADVERTISEMENT
Jan 24, 2013
when drawing an arc or circle, i save the file and close it. when reopening it, the arcs become segments!
View 4 Replies
View Related
May 9, 2011
I am trying to create a 3D elbow that is Ellipse at one end and is circular at the other.
I've attached and example of what im trying to make.
Elbow.jpg
View 5 Replies
View Related
Sep 5, 2011
I'm trying to put a text around a circle / arc.
I'm able to create an ellipse with the select tool, create a path from it and then add a text "along the path". Unfortunately I can't specify on what position of the arc/ellipse the text should start (left-upper corner, middle, right upper corner, etc.).
View 2 Replies
View Related
Dec 24, 2013
Using VB.NET
How to draw connected line arc line arc line and so on, given some points formatted in a file like this
easting northing radius
0 0
10 10 200.00
12 10 150.00
30 20 60.00
50 30 50.00
50 43 60.00
1640.42 1104.30 50.00
1770.20 1100.62 100.00
1850.00 1085.18 100.00
2002.61 1141.46
the output will be like this :
line arc line arc line arc line arc line arc line arc line arc line arc line
View 1 Replies
View Related
Jun 28, 2013
3 lines. 2 arcs. All coplanar, all meet end-to-end.
I set "Units/precision" to 0.00000000 and inspected them. They are all x=0 for each endpoint, therefore coplanar. I also did a point "ID" command and checked each endpoint approaching from both sides and confirmed that each pair of results was identical, so all the ends meet exactly.
I was under the impression that Join or at least PEDIT should be able to combine coplanar lines/arcs that all meet end to end into a polyline. Also, using the Express Tool's "FLATTEN" command doesn't work.
The reason I'm doing this is because I've drawn lines/arcs that trace along the midpoint of a sheet metal's material thickness, and this sheet metal has two bends in it and isn't flat anymore, so converting the lines/arcs to a single polyline will tell me how long the flat plate needs to be that will be ordered to create it.
View 9 Replies
View Related
Oct 18, 2011
Joining lines into polylines in autocad 2007. Basically, I got stuck when joining several lines together using PEDIT and then Join. At the start, it was very smooth process with no drama. Then, I came across two polylines and wanted to join them together, it just did not work. It works most of the time. Why I can't join certain lines together or two polylines together. This is a 2D drawing CAD.
View 3 Replies
View Related
Mar 9, 2012
im after to join two lines into one line. ive got a rad of 10mm then a straight line.
dxf as shown, im using Lt
View 5 Replies
View Related
Oct 6, 2013
Sometimes when I am filleting lines they end up joining together like a Polyline. Is there a setting I can turn off that will not allow lines to join when filleting?
View 3 Replies
View Related
May 31, 2012
The arcs in the object i have drawn gets converted to lines when i mirror the object.
View 3 Replies
View Related
Mar 20, 2012
Normally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
View 4 Replies
View Related
Feb 6, 2012
Im creating plans for a new entryway and so that I have some perspective on how it will all join together i'm also creating a 3d model of my entry idea. In order to move things around to get a better view of how im planning on building this entry, I joined studs together so that I can move things around in the viewport without having to select each object. I know I can grab all the objects at the same time to move but I was wondering IF there is a way to union objects so that they dont lose the lines between joining objects. For example if 2 - 2x8 studs are next to each other and I were to union them, then they would plot as a 4 x 8 instead of 2 - 2 x 8's OR is there a way to maintain lines after union?
View 2 Replies
View Related
Jul 25, 2012
I'm trying to draw a circle and an ellipse so that the ellipse shares exactly two points of contact between the two paths (not centered).
This is seemingly impossible with the tools provided since, if you draw an ellipse normally, with the anchor points of the ellipse on the circlular path, there are four points of contact, which means the two paths overlap.
I've tried revolving a line segment that goes from the edge of the circle to the middle of the circle (not center) with similar results.
Drawing the ellipse first doesn't work either.
Astute Graphics has a plug-in, Subscribe that would almost work, except it only draws circles, not ellipses.
Am I overlooking someting extremely obvious, or am I correct to say that illustrator can't do this? I'm using CS5. Maybe this is something that is fixed in CS6 with a snap to path option?
View 28 Replies
View Related
Dec 11, 2013
I have been using the radial filter with no problems.Now it will not display the circle or ellipse. it seems to be working as when I try to do the circle and it will not show but if I change the exposure or any of the setting it does do that.
Have I accidently changed something or a setting to cause this .
View 8 Replies
View Related
Jul 9, 2012
The user is unable to add any sort of Lines, Arcs, etc to an existing file. However not all files behave this away. It seems like there must be some sort of a lock or a security item in place to prevent changes being made.
View 2 Replies
View Related
Oct 30, 2013
I have a giant polyline containing a mix of arcs and straight segments, and I would like to convert all of the arcs into a series of small, straight lines so that I can use the polyline with a plug-in I wrote to use the polyline as a selection polygon.
Someone mentioned something about WMFOUT and WMFIN but that gave me some pretty weird, wobbly lines as a result and plus it didn't scale things the same when I used WMFIN.
View 3 Replies
View Related
Sep 6, 2012
I am looking for a way to use objects created from lines and arcs as text because of a machine that will not read text. The objects look like letters and numbers. I am wondering if there is a way to create a text style, library or whatever with the created "text". There can be hundreds of characters on a single drawing so importing and aligning and placing each object 1 at a time is very slow and painstaking.
View 9 Replies
View Related
Oct 18, 2011
I've been trying to figure out how to do this. I have a file with 41 drawings, and 7650 objects. and i want all the lines, arcs and circles to be turned into polylines. Now the Mpedit command doesnt really do it for me.
Command: MPEdit
Select objects: Specify opposite corner: 4632 found, 10 groups
Select objects:
divide by zero
This is what happens when i write MPEdit, mark everything in my drawing and press enter. Now i also tried marking a line, using select similar, and fixing it that way. but i get the "divide by zero" error aswell.
View 2 Replies
View Related
Apr 16, 2013
I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
View 6 Replies
View Related
Mar 30, 2012
I used the "break" command to split some lines into segments, but now I can not join them again using PEDIT. They are all on the same elevation. What is preventing me from joining them? I've attached the file in question, I'm trying to join the red (metal layer) lines.
View 3 Replies
View Related
Jul 18, 2013
I would like to draw a Circle with the Ellipse tool and then add a Vector Mask
next i would like to Duplicate the layer and then select the Vector Mask Thumbnail in the layers panel so that when i select the Pen tool the Intersect Shape Areas is available
however, i cannot seem to get the Vector Mask to be available it is always grayed out no matter what i try to do.
i am trying to add a "glossy" effect to the circle by using the Pen tool to draw a shape through it horizontally and then up and around the top of and joining/closing it so that i can add a white>trans gradient.
Using Ps cs6 and Windows 7
View 5 Replies
View Related
Jan 29, 2014
I'm making a logo for someone by hand-drawing a font I made up. But because I was having trouble drawing a perfect letter 'O', I'm using the "Circle/Ellipse" tool to do it. I drew an 'O' with that tool that's almost the right size... and I wanna draw another one just a little shorter... but I can't figure out how to place the completed new shape directly over the old one.
I don't know where to start the action with the tool! The completed shape always ends up in the wrong place. How to get my finished shape to complete just where I want it to? (Re-sizing the shape won't work because that changes the thickness of the line I used for the letter 'O'.)
View 4 Replies
View Related
Feb 23, 2014
I'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?
View 8 Replies
View Related
Dec 13, 2012
I've looked at adding spaces to a plan that is simply lines and arcs... no intellegent objects.
It could get somewhat messy doing Generate Spaces... if the doors and swings are frozen the bounding objects don't get found... but if the doors and swings are on... the spaces go in fairly well... but then the door swing is used as a boundardy.
View 4 Replies
View Related
Mar 29, 2013
Using VB.NET, how to create a new polyline out of existing lines and arcs? I am converting existing VBA code into VB.NET, developing in AutoCAD 2010 using VS Professional and I just stumbled into this road block.
Without using programming code, this task can be accomplished via AutoCAD command by typing the PE command, selecting the JOIN option and then selecting any lines or arcs which should be combined to form a polyline.
Using programming code, however, I am quite stumped on this task. I have been able to successfully create the lines and arcs which should form the polyline, and they are all connected as well so they would form a connected polyline; I simply do not know how to proceed from here.
View 6 Replies
View Related
May 6, 2013
I need to crop image in autocad, path for croping is made of lines and arcs and one picture needs to be croped with circle. Is it possible to crop this way?
View 4 Replies
View Related
Oct 6, 2013
what is the difference btwn using the join icon and joining lines using the pedit command?
View 5 Replies
View Related
Jan 9, 2014
so in the old illustrator i was able to export to a dxf with lines and arcs and autocad options and now there is no longer a prompt for such thing and after exporting it turns a circle into little straight lines instead of arcs....
View 1 Replies
View Related
Apr 23, 2013
How do I join two line endpoint together, which terminate at the same anchor point and are at a 90 degree angle, to form a corner instead of a stair step? My problem is on the left, and I want it to look like the right corner.
View 4 Replies
View Related
Oct 5, 2012
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
View 8 Replies
View Related
Apr 17, 2012
When I join 2 lines that are dashed (or dotted, I don't know which is the correct name) there's no "corner". See picture below. In one of the corners the lines doesn't meet. In the other there's a "cut-out".
View 14 Replies
View Related
