I need to crop image in autocad, path for croping is made of lines and arcs and one picture needs to be croped with circle. Is it possible to crop this way?
View 4 RepliesI am looking for a way to use objects created from lines and arcs as text because of a machine that will not read text. The objects look like letters and numbers. I am wondering if there is a way to create a text style, library or whatever with the created "text". There can be hundreds of characters on a single drawing so importing and aligning and placing each object 1 at a time is very slow and painstaking.
View 9 Replies View RelatedDebian updated GIMP this morning (2.8.2) and I notice that after cropping an image, the crop lines remain on the picture. Is this a bug or a "feature" ?
View 1 Replies View RelatedI have a giant polyline containing a mix of arcs and straight segments, and I would like to convert all of the arcs into a series of small, straight lines so that I can use the polyline with a plug-in I wrote to use the polyline as a selection polygon.
Someone mentioned something about WMFOUT and WMFIN but that gave me some pretty weird, wobbly lines as a result and plus it didn't scale things the same when I used WMFIN.
In Photoshop CS6, the moment you select the Crop Tool, a "cropping bounding box" appears instantly over the image. This didn't happen in CS5. In CS5 I would be able to click and start dragging the Crop Tool 'outside' the image and then drag into it so that my "cropping bounding box" (don't know what to call it) would snap to the edges of the image.
In CS6, since this box is automatically there already over the entire image, clicking outside the image invokes some unwanted rotation action.
When I crop a cdr image, part of the image disappears within the crop window. Clicking inside the cropped image reveals node locations as if the image is still there but the black lines are invisible. But, there are some objects visible in the cropped image.
View 3 Replies View RelatedI want to crop an image visually, by sliding the cropping bars by eye. Not by typing in a specific size. How do I do that? My cropping tool seems to be set on some dimension. I've "reset" it, tried recropping from the "original" but still when I move the top horizontal bar in the cropping tool, it automatically is moving the vertical sides. As if a preset size/dimension/ratio is applied to it. Although I didn't apply any such dimension.
View 2 Replies View RelatedUsing VB.NET
How to draw connected line arc line arc line and so on, given some points formatted in a file like this
easting northing radius
0 0
10 10 200.00
12 10 150.00
30 20 60.00
50 30 50.00
50 43 60.00
1640.42 1104.30 50.00
1770.20 1100.62 100.00
1850.00 1085.18 100.00
2002.61 1141.46
the output will be like this :
line arc line arc line arc line arc line arc line arc line arc line arc line
3 lines. 2 arcs. All coplanar, all meet end-to-end.
I set "Units/precision" to 0.00000000 and inspected them. They are all x=0 for each endpoint, therefore coplanar. I also did a point "ID" command and checked each endpoint approaching from both sides and confirmed that each pair of results was identical, so all the ends meet exactly.
I was under the impression that Join or at least PEDIT should be able to combine coplanar lines/arcs that all meet end to end into a polyline. Also, using the Express Tool's "FLATTEN" command doesn't work.
The reason I'm doing this is because I've drawn lines/arcs that trace along the midpoint of a sheet metal's material thickness, and this sheet metal has two bends in it and isn't flat anymore, so converting the lines/arcs to a single polyline will tell me how long the flat plate needs to be that will be ordered to create it.
How do I keep my clipping path from shifting postitions when I crop an image?
View 1 Replies View RelatedThe arcs in the object i have drawn gets converted to lines when i mirror the object.
View 3 Replies View RelatedThe user is unable to add any sort of Lines, Arcs, etc to an existing file. However not all files behave this away. It seems like there must be some sort of a lock or a security item in place to prevent changes being made.
View 2 Replies View Related how to join line or polylines with ellipse arcs or circle arcs and now.. I give up! Here is my problem: What I would like to draw can be compared with a pear: a succession of circle arcs ellipse arcs and maybe polylines. Once the profile done, I was planning to use REVOLVE or (EXTRUDE + FLLET) to finish my drawing... the problem is that I can't join 2 ellipse arcs from different ellipses (which means neither with a circle arc. How would you proceed to draw a pear?
PS: I'm using autoCAD 2006 z.54.10 version
I've been trying to figure out how to do this. I have a file with 41 drawings, and 7650 objects. and i want all the lines, arcs and circles to be turned into polylines. Now the Mpedit command doesnt really do it for me.
Command: MPEdit
Select objects: Specify opposite corner: 4632 found, 10 groups
Select objects:
divide by zero
This is what happens when i write MPEdit, mark everything in my drawing and press enter. Now i also tried marking a line, using select similar, and fixing it that way. but i get the "divide by zero" error aswell.
I've looked at adding spaces to a plan that is simply lines and arcs... no intellegent objects.
It could get somewhat messy doing Generate Spaces... if the doors and swings are frozen the bounding objects don't get found... but if the doors and swings are on... the spaces go in fairly well... but then the door swing is used as a boundardy.
Using VB.NET, how to create a new polyline out of existing lines and arcs? I am converting existing VBA code into VB.NET, developing in AutoCAD 2010 using VS Professional and I just stumbled into this road block.
Without using programming code, this task can be accomplished via AutoCAD command by typing the PE command, selecting the JOIN option and then selecting any lines or arcs which should be combined to form a polyline.
Using programming code, however, I am quite stumped on this task. I have been able to successfully create the lines and arcs which should form the polyline, and they are all connected as well so they would form a connected polyline; I simply do not know how to proceed from here.
Is it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies View RelatedI have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies View Relatedso in the old illustrator i was able to export to a dxf with lines and arcs and autocad options and now there is no longer a prompt for such thing and after exporting it turns a circle into little straight lines instead of arcs....
View 1 Replies View RelatedI want to turn this shape on the left, into one like the one on the right... i.e., not so many points.
I basically want to convert the polylines into arcs or something. i can do this by redrawing, thats no problem, but this is a very simple drawing compared to what i normally have to deal with, this is just an example.
I am exporting to Adobe and AplhaCam, when ever I send DXF or DWG files, the Circles or arcs are segmented.
How do I make not so segmented?
How can I convert arcs to splines.
View 5 Replies View RelatedUsing AutoCAD Civil 3D 2013, now installing Service Pack 1 (kept crashing, this time it's working though), and I'm trying to find the area of a pathway that I've drawn in 2D with standard lines. Using the area tool, I want to find the area of the path, but it arcs around a 180 degree corner. I tried getting a rough estimate of the area by clicking at several points along each of the arcs, but after clicking a point where the arc joins the straight line of the straight section of the path, it literally won't let me click the next point. I can, however, specify the next point as long as it's nowher near the arc. Same goes for the polyline tool.
Just got an error code for the Service Pack installation, too. "A problem prevented the service pack from being installed, contact your administrator. Error 1603"
Is there an easier way to crop a video than using the cropping filter? I'd love to flip some bit that makes dragging in the border of a video crop instead of distorting the aspect ration. Is there a faster way?
View 2 Replies View RelatedThe aspect ratios seem fixed to one or other of the presets and custom doesn't seem to work.
View 3 Replies View RelatedI'm almost finish tracing my image in AutoCAD but suddenly the lines are not showing on top of the image. But it is at the back of the image.
View 2 Replies View RelatedI know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
I'm just wondering whether there is a way to crop an image in PS in a different shape other than the default square. Like circle crop or pentagon.
View 5 Replies View RelatedWhen cropping a portrait format to landscape format (same aspect ratio) AND rotate the crop slightly, the crop resets after clicking away from the image and back. It does not happen if the crop is not rotated.
View 2 Replies View RelatedIt seems that with the 4.4 update a bug was introduced with the crop aspect ratio not staying locked when cropping. It changes to "custom" even though the lock remains. What do I do to maintain a standard photo size and not switch to custom? For printing purposes, I need the ratio to stay locked and dimensions standard.
View 2 Replies View RelatedI'm editing someone's 2d inventor dwg, and want to show a part behind an object in the section that isn't currently showing (the part I want to show is on the model, in the appropriate level of detail referenced by the 2d view.)
I believe that the author turned the line visibility off. Is there a way to turn all line visibility back on in a 2d view?