AutoCAD 2013 :: How To Convert Arcs To Splines
Feb 12, 2013How can I convert arcs to splines.
View 5 Replies
ADVERTISEMENT
AutoCAD 2013 :: Convert Polylines Into ARCs
May 6, 2013I want to turn this shape on the left, into one like the one on the right... i.e., not so many points.
I basically want to convert the polylines into arcs or something. i can do this by redrawing, thats no problem, but this is a very simple drawing compared to what i normally have to deal with, this is just an example.
AutoCAD 2013 :: How To Convert Arcs Into Several Straight Lines
Oct 30, 2013I have a giant polyline containing a mix of arcs and straight segments, and I would like to convert all of the arcs into a series of small, straight lines so that I can use the polyline with a plug-in I wrote to use the polyline as a selection polygon.
Someone mentioned something about WMFOUT and WMFIN but that gave me some pretty weird, wobbly lines as a result and plus it didn't scale things the same when I used WMFIN.
AutoCAD 2010 :: Converting Splines Into Arcs
Sep 23, 2011I have a bugging problem.
I usually use Inventor to create a model from customer supplied blueprints, and then use the model to get the 2D geometry into
AutoCAD for further processing.
Now, unfortunately Inventor has a pitiful 2D drawing method, where circles and arcs that do not lie exactly on the plane end up as a spline.
They are true arcs and circles and should be true arcs and circles on the 2D view, but aren't.
What I would like to do is turn them into one.
Is there any command or method to do that?
I was hoping that Overkill would work ..... it doesn't.
AutoCAD 2010 :: Splines To Arcs - Rational Dimensions
Jul 27, 2012I am working on a drawing with a lot of splines. I need to dimension the curves to some rational dimensions which means I need to convert the splines to arcs. Is there away to do that?
View 4 Replies View RelatedAutoCAD Inventor :: Convert Splines
Dec 26, 2012I have a drawing of a map full of polylines and some splines. I want to somehow select or show only the splines for then to convert them into polylines to make them ready for laser printing.
The drawing has thousands of lines so selecting one by one to see if its a spline will take forever.
AutoCad :: How To Convert Splines To Line
Jun 14, 2010I am really in need of knowing how to convert splines to lines?
View 9 Replies View RelatedAutoCAD .NET :: Convert Arcs To Polylines?
Jun 25, 2011I've got ObjectIds of a bunch of arcs that I need to convert to polylines for further processing.
I was thinking of using the COM interface and sending the PEDIT command and converting the arcs.
The only problem is I don't know of a way to put the objectids into a selection set, then call the pedit command and use the previous selection.
AutoCAD 2010 :: Convert Plines To Splines?
Mar 15, 2012I searched and saw lots of posts on converting a spline object into a pline, but not the other way around. I like the way that splines can use control vertices or fit points.
I know that you can apply a spline smoothing to a pline, but what I'd like to do is to convert a pline object into a spline object and splining a pline does not do that.
Any fairly easy way to do this? Are there LISP routines that do this?
AutoCAD Civil 3D :: Convert Multiple Polylines To Arcs
May 22, 2012I have many segmented polylines that I need to turn into arcs. See the attached image for the method I use to create an arc from a single polyline. I need to do this to thousands of polylines. Does some other method that can do many polylines at once?
View 5 Replies View Related3ds Max Modeling :: Convert Bunch Of Splines Into A Poly
Jul 3, 2011is there any way to convert a bunch of splines into a poly? Its going to be a city, the shape is given. I need it as a poly, now its just a bunch of splines.
View 8 Replies View RelatedAutoCAD 2013 :: Exporting Arcs And Circles
Dec 5, 2012I am exporting to Adobe and AplhaCam, when ever I send DXF or DWG files, the Circles or arcs are segmented.
How do I make not so segmented?
AutoCAD 2013 :: Control Splines To Make Perfect Arc?
Feb 12, 2013how can I control the splines to make a perfect arc. Is there an other way to control the spline with out draging each point of the spline?
View 3 Replies View RelatedAutoCAD 2013 :: Cannot Specify Points On Or Near Arcs With Object Snap On
Dec 10, 2012Using AutoCAD Civil 3D 2013, now installing Service Pack 1 (kept crashing, this time it's working though), and I'm trying to find the area of a pathway that I've drawn in 2D with standard lines. Using the area tool, I want to find the area of the path, but it arcs around a 180 degree corner. I tried getting a rough estimate of the area by clicking at several points along each of the arcs, but after clicking a point where the arc joins the straight line of the straight section of the path, it literally won't let me click the next point. I can, however, specify the next point as long as it's nowher near the arc. Same goes for the polyline tool.
Just got an error code for the Service Pack installation, too. "A problem prevented the service pack from being installed, contact your administrator. Error 1603"
3ds Max :: Detach All Splines Inside One Object Into Separate Splines
Aug 5, 2011If I have imported a large multi-spline object, is there a way to bust it up into separate splines easily -- without having to detach each one individually?
View 3 Replies View RelatedAutoCAD 2013 :: How To Crop Image Path For Cropping Is Made Of Lines And Arcs
May 6, 2013I need to crop image in autocad, path for croping is made of lines and arcs and one picture needs to be croped with circle. Is it possible to crop this way?
View 4 Replies View RelatedAutoCAD 2013 :: Convert DXF And DWG To NC1
Aug 31, 2012im working whit and have purchased a computer to plate punch that works with files in nc1 extension, but only works with extensions Autocad dxf and dwg, so we are looking for if Autodesk has a module to convert dxf or dwg extensions to nc1.
I've found one that converts a DXF NC1 but I found one that converts DXF to NC1.
AutoCAD .NET :: Convert DWG To BMP In 2013
Nov 20, 2012I want to convert the .dwg file to .bmp in AutoCAD 2013 using interop services in API
I have a code to perform this in AutoCAD 2012 but that is not working fine in AutoCAD 2013.
This is what i tried
AcadSelectionSet oSS = null;
short[] ftype = new short[1];
ftype[0] = 410;
object[] fdata = new object[1];
fdata[0] = "Model";
acadapp.ZoomExtents();
oSS = _acadapp.ActiveDocument.SelectionSets.Add("MySet");
oSS.Select(AcSelect.acSelectionSetAll, null, null, ftype, fdata);
acadapp.ActiveDocument.Export(OutputFileName, "BMP", oSS);
AutoCAD 2013 :: Convert Dwg To Jpg
Feb 25, 2013How I make convert dwg files to jpg by .NET (dont using AutoCAD). I have many dwg files. Convert all files makes for preview files in web browser.
View 1 Replies View RelatedAutoCAD 2013 :: DWG To DGN Batch Convert
Aug 7, 2013I have around 100 dwg files, client wants the soft copy in dgn format, also layers needs to be renamed in dgn.
I need to convert those files to dgn, any script to run so it does it automatically?
Converting it manually one by one will take me some time.
AutoCAD 2013 :: Unable To Convert DWG To PDF?
Aug 13, 2013I have been using autocad quite frequently lately and for some reason today I cannot convert my DWG files into PDF, although I have done the many times before. I have even tried opening old drawings to convert them to PDF and nothing will export.
View 3 Replies View RelatedAutoCAD 2013 :: Convert DWG To WCS File?
Oct 15, 2012We are providing files to a fabricator for their use. They have requested the drawing file, it is a 3D solid model AutoCAD 2013 file, be provided in .wcs format. I assume I need a piece of software to make the conversion but have not found one.
View 4 Replies View RelatedAutoCAD 2013 :: Convert A Dwg File In Obj?
May 15, 2012I need to convert a dwg file in obj. Is it possible? If yes how?
View 6 Replies View RelatedAutoCAD 2013 :: Best Way To Convert 3D DWG Into 2D Flat DWG
Jul 2, 2013I've been receiving the converted 3d DWG files from my subs (creatd in CadMech mostly).
I want to know what's the best way to convert them into true 2d FLAT dwg?
I tried to use the commaned "FLATTEN" and found no success.
AutoCad :: Convert 2013 DWG To 2010?
Apr 5, 2013I have a file that my boss saved as 2013 format, I can't open it. He's the only one in the company that has 2013, and he's not in the office.
View 8 Replies View RelatedAutoCAD 2013 :: Convert A Drawing To PDF
Feb 19, 2013When I convert a drawing to pdf that has a Delta Symbol with a wipeout in it,,I get hatch lines in the delta. How do I convert and not get these hatch lines.
View 3 Replies View RelatedAutoCAD 2013 :: Ellipses Convert To Polylines?
Oct 13, 2013Is there a method of converting ellipses to polylines?
View 4 Replies View RelatedAutoCAD 2013 :: Convert 2D Polygon To Solid
Jan 9, 2013Then I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedAutoCAD 2013 :: How To Batch Convert CCM Files To DWG
Aug 8, 2012How to batch convert .ccm files to dwg? I believe they are called CopyCad Model files.
View 1 Replies View RelatedAutoCAD 2013 :: Control Or Library To Convert DXF To BMP?
May 18, 2013Does Autodesk provide any control or library(SDK) for DXF files that can convert DXF file into raster format, such as BMP?
View 3 Replies View RelatedAutoCAD 2013 :: Convert A MM Drawing To INCHES?
Oct 9, 2013i did a drawing in metric now i need to convert to inches is this possible?
View 9 Replies View Related