AutoCAD 2013 :: Convert A MM Drawing To INCHES?
Oct 9, 2013i did a drawing in metric now i need to convert to inches is this possible?
View 9 Replies
ADVERTISEMENT
AutoCad :: How To Convert Drawing Into Feet And Inches
Mar 24, 2011I have a DWG from a land surveyer, how is the drawing converted into feet and inches so it can be used as an architectural site plan?
View 3 Replies View RelatedAutoCad 2D :: Convert Drawing Into Feet And Inches For Remodeling Use
Jul 22, 2013I have a drawing that has a scale of 1:100. I need to convert the drawing into feet and inches for remodeling use. How do I determine what the conversion factor is?
View 4 Replies View RelatedAutoCAD 2013 :: Convert Units From Metric Mm To Imperial Feet / Inches
May 2, 2013I received a .dwg file from S. Korea with dimensions and units all in the metric mm and I need the units to be in feet and inches. Is there a command to switch dimensions and units to imperial feet and inches?
Rather than changing units in command UNITS Inches and Architectural, and SCALE 25.4, is there any other way to switch metric to imperial systems. Scaling somewhat does the trick but, provided dimensions remain in mm.
AutoCAD 2013 :: Commands Only Work In Inches - Not Feet / Inches
Mar 20, 2013Out of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View RelatedAutoCAD 2013 :: Convert A Drawing To PDF
Feb 19, 2013When I convert a drawing to pdf that has a Delta Symbol with a wipeout in it,,I get hatch lines in the delta. How do I convert and not get these hatch lines.
View 3 Replies View RelatedAutoCAD 2013 :: Convert Drawing (DWG) File To SVG?
Jun 19, 2012How to convert a drawing (.dwg) file to .svg?
View 4 Replies View RelatedAutoCad 2D :: Annotation Scale To Convert Mm To Inches
Feb 5, 2013I created a new annotation scale to convert mm to inches and changed my DIMSTYLE to dimension to annotative as well, but when I go to dimension nothing happens. My dimensions, arrows and extension lines are still small.
What's more bizzare is when I click the dimension and right click properties, it says my annotation scale is 1:1 and it's not set to change to annotative even though my DIMSTYLE says to. So I have to manually click the dimensions and change them all to my DIMSTYLE and change the annotation scale.
What did I do wrong when I created the new annotation scale?!?!
AutoCAD 2013 :: Convert Drawing Using Asian Bigfont SHX Font Back To English
Aug 15, 2013Is there any way to convert a drawing using the Asian Bigfont.shx font back to English? The font can be changed, but the characters remain un-readable. Mostly ? and letters and symbols but no words. It seems like it needs to be translated, and not just converted, but it is not displayed in any form that could be translated.
View 3 Replies View RelatedAutoCAD 2013 :: Convert Imported Photo In JPEG / BMP / TIFF Or Any Format Into Lines In Drawing
May 22, 2013Is there any way one can convert an imported photo in Jpeg or Bmp or Tiff or any other format into lines in a drawing?
View 7 Replies View RelatedGIMP :: Convert Inches Into Pixels?
Aug 19, 2013I created a new image with the dimensions 11x8.5 inches and now when I scale ANYTHING it uses inches and I want it pixels, I CANNOT figure out how to convert the units into pixels!! it is NOT under 'units' in the menu!
View 5 Replies View RelatedAutoCad 2D :: How To SCALE A Drawing From MM To INCHES
Feb 24, 2012How do you Scale the drawing that i have in model space that's currently drawn in MM to INCHES?
I'm AutoCAD employee and i still have trouble with scaling. A
AutoCad :: Drawing In Mm And Need To Dimension In Inches?
May 17, 2011I have a hard copy drawing in mm so i drew it in mm. Now i have to dimension it in inches. I have tried several things including opening a new drawing in imperial, changed the units, INSUNITS are set to 1.
View 9 Replies View RelatedIllustrator :: Convert Stroke Weight In AI6 From Inches To Pt?
Aug 7, 2013How do I convert the stroke weight in Ai6 from inches to pt.?
View 1 Replies View RelatedAutoCad 2D :: How To Change Entire Drawing To Inches
Apr 25, 2013So I have this drawing, which has been annihilated by many different people. One area of concern (among many) is the drawing units...some objects are in inches, some in Millimeters, some in feet, etc...
Question:
Is there a way to change the entire drawing to inches, so if I select an object...any object, properties will have it in inches. Or, if I get area of an object, it will read in square inches?
AutoCAD 2012
AutoCad :: Modify Drawing File - Inches To MM
Sep 7, 2011I am a new user (using Autocad 2006). My problem is I have been given a drawing file that I need to modify but it was drawn in inches, I have always worked in mm's. Can I convert the original drawing to mm's??
View 9 Replies View RelatedAutoCad :: Setting Up Drawing In Feet And Inches
Oct 5, 2011We are having trouble setting up a drawing in Feet & inches. Up until now all we have been drawing in metric.
View 5 Replies View RelatedAutoCad 2D :: Drawing Dimension Tooltip Shows Inches And Not Mm
Apr 25, 2013Everything I draw is metric. I've got my templates set up and all my paper space scaled appropriately. All dimensions are as they should be. The annoying thing is when I'm drawing a dimension, the tooltip shows inches and not mm. How to change?
View 3 Replies View RelatedAutoCAD Express Tools :: Converted Drawing From MM To Inches?
Oct 3, 2012I have a drawing that was drawn in MM, I re scaled the drawing by a scale factor of .03937, when I check the dimensions it appears that it is still off by around 5"
View 2 Replies View RelatedAutoCad :: Converting Metric Drawing Into Inches And Plotting 1:1
Dec 11, 2012i have a drawing from a client that is in metric and i need to print the drawings in inches in 1:1 for my boss. i should know this but it seems to be a bigger problem than i thought.
View 9 Replies View RelatedAutoCad 2D :: 2013 - Cannot Copy In Feet - Only Inches
Aug 24, 2012When I had ACAD 2008 I used to copy objects and type 10' or 4' for the distance3 rather than 120 or 48. For some reason in ACAD 2013, it does not accept my distance in feet anymore. Do I suddenly have a setting off in ACAD 2013? I used to be able to work much more quickly and I work with large distances when copying.
View 3 Replies View RelatedAutoCAD Inventor :: Change Drawing Sheet To Use Millimeters Instead Of Inches?
May 3, 2012I have Autodesk Inventor on a student license, and I use the metric system.
I've been able to change the settings for parts, presentations and assemblies to use millimeters, but for some reason the drawing sheets still use inches.
How do I change the unit settings for drawing sheets?
Illustrator :: How To Convert Vector Drawing Into Non-clipping Paths Drawing
May 5, 2013I want to take two 3D views from (autodesk) Revit Architecture 2012 to Illustrator CS5 and then make use of the live paint bucket tool*. I've printed the two 3D views into pdf files and imported them in Illustrator**. When I select the whole image in Illustrator and then click with the Live Paint Bucket tool on the drawing to modify the drawing so I can color the surfaces, Illustrator gives me the following error:
"The selection contains objects that cannot be converted. Live Paint groups can only contain paths and compound paths. Clipping paths are not allowed."
Exporting images (jpg, png and tiff) from Revit results in the same error. Is there a way to easily convert my vector drawing into a non-clipping paths drawing? Also I'm not sure if the problem should be found in either Revit or Illustrator. What's also strange is that I'm using a tutorial provided by my university, in which there are no issues with clipping paths or anything.
* This in order to make an conceptual image of my building, which I've modeled in Revit. I want to add basic colors to surfaces in Illustrator and then take the image to Photoshop to add shadow, materials, sky etc.
** They only consist of lines, using the 'hidden line' visual style in my views in Revit, in case you know a bit of Revit.
AutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?
Nov 28, 2012Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedAutoCAD 2013 :: Drawing Order - Send To Back / Not Working Anymore In 2013
Apr 17, 2013I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
AutoCAD 2013 :: Setting Up One Drawing In Multiple Screens With One Session Of 2013
Nov 21, 2013I recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
AutoCAD 2013 :: Prompt / Save In 2013 Drawing Format?
Nov 14, 2012As many of us seam to do the option to save by default to an older version of AutoCAD or universal DXF format is selected, my problem is however when you save an existing drawing a prompt appears asking if 'Drawing*.dxf last saved in AutoCAD 2004 format. Save in AutoCAD 2013 Drawing format?' this has annoyed me for years!
I have set it as default DXF 2014 for a good reason I don’t want a prompt asking me if I want to then save it as 2013 or I would have set it like that on my default setting, gets on your nerves when you are doing 100's of files.
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
AutoCAD 2010 :: Convert 3D Drawing To 2D
Feb 18, 2013I am in need of flattened 2D line views of the sides and top of the model shown in the attached 3D file. So far, I have found and tried the FLATSHOT command, but...
"There are no solids or surfaces that can be projected."
So apparently, I'm dealing with the kind of 3D model that FLATSHOT was not intended for. How I can quickly get flattened 2D views of this without eating up my entire workday?
AutoCad :: Convert Text To Drawing
Aug 17, 2012I'm trying to created a drawing of words, can I type them as a text and conver to autocad drawing? I'm using autocad 2010, is there any command to do so?
View 9 Replies View RelatedAutoCAD 2013 :: Drawing Tabs App For 2013 (MDITabs)
Jul 24, 2012i download it successfully BUT nothing happened as usual on my CAD screen - tabs doesn't appear !
- i restart my AutoCAD many times.
- nothing appear in plug-in tab.
AutoCad :: PDF Underlay Convert To Actual Drawing
Mar 17, 2013How can convert PDF underlay into actual autocad 2010 drawing / layer ? PDF file can be opened in autocad 2010 in PDF underlayer.It could be convert into separate lines / individual lines etc...
View 6 Replies View Related