I have Autodesk Inventor on a student license, and I use the metric system.
I've been able to change the settings for parts, presentations and assemblies to use millimeters, but for some reason the drawing sheets still use inches.
How do I change the unit settings for drawing sheets?
I have some drawings that are drawn in millimeters. I need to add to the drawings but when I type 36 I get a line 36" long. I need to change autocad so that when I type 36 it draws a line that is 36mm.
View 9 Replies View RelatedI have this problem with units. I am using 2012 Autocad drafting. I want to work with millimeters, for instance usually when I type 1000, that is usually refereed as 1 meter. Now in the new model space when I type 1000 the line is so long, I even have to press regenerate so that I can see the line. I checked the units, they are set to millimeters, I also checked from options - user preferences they are also set to millimeters.
When for instance I will open an older file that I worked on in autocad 2010, in autocad 2012, it will work fine, when I will write 1000, it will actually come up as one meter. The settings in units and options - user preferences are the same.
I also copied a table from the 2010 file to the new one, and the chair comes up very big in the screen, so again I use regenerate to zoom out.
Also every time I open a new file, I have to go to units and change it from Inches to millimeters. Is there a way to do it once, so that you don't have to do it every time you open a new file in autocad? I know you can customize your workspace, and I have, but that doesn't seam to do it.
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies View RelatedHow could i know if i'm using meters, and not inches, feet or millimeters? and how to set autocad to use meters not inches, feet, nor millimeters.
View 9 Replies View RelatedSo I have this drawing, which has been annihilated by many different people. One area of concern (among many) is the drawing units...some objects are in inches, some in Millimeters, some in feet, etc...
Question:
Is there a way to change the entire drawing to inches, so if I select an object...any object, properties will have it in inches. Or, if I get area of an object, it will read in square inches?
AutoCAD 2012
I have little question that, is it possible to change background colour of drawing sheet in inventor?
I have to change background colour white to black ( as in autocad) .
If it is possible pls where is setting in how to do it?.
When i setup inventor 10 i choose to use inches, but now i want to use MM how would i change it under inventor 10 i thought it would bbe under options but it not.
View 6 Replies View Relatedhow do i change the dimensions from inches to cm on autodesk inventor?
View 1 Replies View RelatedI can't find the option that changes the scale from 1/100 to 1/16" to 1'-0" or how to have the scale show up on a drawing. I've gone into options and turned on the scale visibility but get squat on both.
Also where can I find a list of the title block text options ie. ,
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
I've been using cad for a while but only for simple layout drawing for parts I need made.
Autocad 2010 I want to set up a drawing to draw some manifold adapter plates in millimeters. I can set it up for inches but I'm having a problem setting up for mm. I start a new drawing and select the template initial setup-manufacturing-metric.dwt In drawing unitDecimal and precision is set at 0.000 Units is set to "millimeters"
I draw a circle to test it. I draw a circle of 5 radius. Should be a circle 10mm in dia, correct? But it is huge, my guess is that it's 10 inches. I'm basing the size on what is printed out when I set my print to no scaling, 1:1, plot window. The same as I have for all the drawings I do in inches.
Second question.
How can I get circle centers to show on prints without actually drawing them or putting in dimensions?
By a mistake i have drawn my drawing in millimeters. Thus when i print it in 1:1 it is to small .
And when i click on my block and go to properties, I can't change the block unit it is grey market. is it possible to change that in centimeters ?
Block unit.JPG
I am trying to insert a block in the drawing sheet, that varies in size dynamically. Is there anyway for changing the size of the block.
View 9 Replies View RelatedIs there an easy way to add the superscript "2" to a note for Milli meters squared in Inventor 2010?
Example: mm2 or FT^2
You can't copy a sheet within a drawing to duplicate it. So, as a workaround, I saved a copy of the drawing to a different name and tried to copy a sheet back. Pick the view in the browser, right click, copy. Switch to the original drawing, right click paste in the browser. All I keep getting is an error "Invalid input for Request." I even think I remember getting this error before and finding a way around it.
View 3 Replies View Related have 2 questions
1.) If you look at the attached screenshot in the Edit Sheet form there is a sheet "Revision" input field is it possible to fill this out via iLogic?
2.) We have some custom E size sheets (height always 34in width varies 5ft, 6ft, and 8ft) when we select on of these sheet sizes that we created it will display "Custom Size (inch)" when using the sheet property <sheet size> in the title block not the name of that we gave these sheets (Which creatively enough is "E-5ft", "E-6ft", and "E-8ft"). I thought I had this solved by doing this:
Dim oSheetSize As String
oSheetSize = ActiveSheet.Size
If oSheetSize = "Custom" Then
iProperties.Value("Custom", "SheetSize") = "E"
Else iProperties.Value("Custom", "SheetSize") = oSheetSize
End If
then change the titleblock sheet size field from sheet property <sheet size> to custom drawing properties <SheetSize> this all works great if there is only 1 sheet in the IDW where it fails is if there is more then one sheet.
I have a complex part and make a drawing. i want to make sections and details and to put some of them in another sheet in the same file. Also, can i put the hole table in another sheet?
View 1 Replies View RelatedIs there a way, using VBA to get the sheet size of a drawing without opening the drawing? I know how to get it with the drawing open, so alternatively, is there a way to open all the drawings in a folder, one at a time, then get sheet.size, then close and open the next?
View 3 Replies View RelatedI am using Inventor 2012 64 bit with Win 7.
We have a lot of drawing that has some extra sheet for ref. and Inventor let me exclude count and print from those extra sheet. This work fine but when we check-in the drawing to vault it update or publish all sheet to dwf. This is very compass for us because we full the dwf file from vault to release and the sheet count is different than the print out.
Is there a way to EXCLUDE those sheet when check-in or update dwf?
I am running inventor 2010 suite with service pack 2 and when I try to insert a JPEG or BMP into a Drawing Sheet (not a sketch on a part file), the image does not appear. I have done this on previous versions numerous times and it worked perfectly fine.
The message which appears on the screen says "TEMPEMBED.BMP" and it has a photoshop CS4 logo. When I do a print preview, nothing appears on the page. I have opened up a previous drawing sheet, which has a JPEG & BMP inserted and the image is shown, but when I try to insert another image on the same drawing sheet, the same thing happens.
I am running a pretty fast machine, with an intel i7 processor and a pretty hardcore graphic card.
I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
I have 4 different sized drawing templates made, one each for A,B,C and D size. There are times when I start a drawing on a C size border/sheet and it gets too cluttered as I add views or annotations. Is there any way to insert/change the sheet size to the D sized template without starting over?
View 6 Replies View RelatedI have created a bunch of sheet metal rules for my different gauge thicknesses. Is there a way I can propogate the gauge information to my drawing so that if I were to change the gauge, that info would also update on my drawing sheet? The only thing I can get to work currently is to pull in the material used, but that doesn't include the gauge.
View 9 Replies View RelatedJust trying to add an existing symbol to a drawing sheet. I know i'm not formating the point correctly and i get a position error. How can i get the point location of two intersecting lines in my border to hard code the location?
Error:
Error on Line 18 : Argument not specified for parameter 'Position' of 'Public Function Add(SketchedSymbolDefinition As Object, Position As Inventor.Point2d, [Rotation As Double = 0.0], [Scale As Double = 1.0], [PromptStrings As Object]) As Inventor.SketchedSymbol'.
Error on Line 18 : End of statement expected.
DimoApp As Inventor.Application=ThisApplication
DimthisIDW As DrawingDocument=oApp.ActiveDocument
oSheet=thisIDW.ActiveSheet
DimoSymDef As SketchedSymbolDefinition
oSymDef=thisIDW.SketchedSymbolDefinitions.Item("APPROVAL STAMP")myPoint=ThisApplication.TransientGeometry.CreatePoint2d(1, 6)
oSheet.SketchedSymbols.Add(oSymDef) ,myPoint
What is the code to select a drawing sheet by either its number or description but NOT both together?
Sometimes want need to select the first sheet by number 1 but the sheet description can change. and Sometimes we will need to select the sheet by its description but the sheet number may vary.
Any way to make the drawing "sheet number", on which a "part" or "assembly" detail appears, show up in the "parts list"/"bom"?
I need to automate that information in order to prevent errors during revisions, and for company purposes.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I've seen snipppets of code to get the Sheet name but is there a way to set it via code? I'm thinking it might be useful to set the sheet names to the chosen sheet format (as opposed to just 'Sheet').
I'm sprucing up my drawing template...
Rule #1 is for selecting sheet format (which title block/sheet size / orientation)
Rule #2 is for setting iproperty values to populate the titleblock with info. (if required)
Rule #1 was based on code from S.Bixler & inventortrenches
Rule#2 was based on more code taken from here.
I am having an issue with changing sheet sizes using VBA. Due to the constraints under which my borders and title blocks were created, inventor forces me to delete the current border before changing the sheet size. I have 5 different borders and 2 title blocks.
-Borders
"A0 Border (13x8 Zone)"
"A1 Border (8x6 Zone)"
"A2 Border (6x4 Zone)"
"A3 Border (4x3 Zone)"
"A4 Border (No Zones)"
-Title Blocks
Title Block 1 - All sizes except for A4
Title Block 2 - A4 Only
I'm having trouble changing the sheet size. This is the extent of the code that I know actually works:
Option ExplicitPrivate oDoc As DrawingDocumentPrivate oSheet As SheetPrivate oBorderDef As BorderDefinitionPrivate oBorder As BorderSet oDoc = ThisApplication.ActiveDocumentSet oSheet = oDoc.ActiveSheetSet oBorderDef = oDoc.BorderDefinitions.Item("A0 Border (13x8 Zone)")Private Sub UserForm_Initialize() cmbPageSize.AddItem ("A0") cmbPageSize.AddItem ("A1")
[code].......
See attached pic what is supposed to be a "D" size format/border is now an "E" size. I have many sheets in this idw and every D size was like this. it was not like this when i closed it a couple of days ago.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
How do you Scale the drawing that i have in model space that's currently drawn in MM to INCHES?
I'm AutoCAD employee and i still have trouble with scaling. A