AutoCAD Inventor :: How To Exclude Drawing Sheet From DWF When Check-in
Aug 31, 2013
I am using Inventor 2012 64 bit with Win 7.
We have a lot of drawing that has some extra sheet for ref. and Inventor let me exclude count and print from those extra sheet. This work fine but when we check-in the drawing to vault it update or publish all sheet to dwf. This is very compass for us because we full the dwf file from vault to release and the sheet count is different than the print out.
Is there a way to EXCLUDE those sheet when check-in or update dwf?
View 1 Replies
ADVERTISEMENT
Jan 16, 2013
I have an assembly were i want to exclude some parts in a sectional drawing view. I mean i want those parts should be visible in section view but should not get sectioned. And the remaining parts will be in a sectioned view. Is that posible or i may be missing something.
View 8 Replies
View Related
Feb 1, 2012
Is there an option in drawing mode to exclude certain parts from a section view.
According to ASME Y14.3 parts such as shafts, keys bolts and nuts should be excluded in sectional view. Its not just removing the Hatching, the part has to show completely.
The closest I found in Inventor is that you can exclude Standard parts from being sectioned. Some of my parts are not in the standard library.
I would like to have the option to choose which parts I want to section and which ones I don't.
View 9 Replies
View Related
Sep 20, 2013
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies
View Related
Apr 16, 2012
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
View 1 Replies
View Related
Jan 8, 2014
I'm wondering if it is possible to check-in drawing into vault using i-logic?
If you check-in a drawing into our vault, it automaticly exports a .dwf to a storage server. We also have a simple button for making .pdf of the drawing to sent to the customer.
What i want to ensure is that the .dwf file and the .pdf file are the same. So when i press "make a .pdf" the rule will save my document, make a .pdf and (if possible) check it into vault. So from that point the .pdf for the client and the .dwf on the server are the same.
Inventor 2013
View 2 Replies
View Related
Mar 20, 2013
Is there a way to check in VBA if the design doctor has found errors in a drawing? I have a mass print script and it'd be handy to be able to skip printing any drawings that have errors like unatached dimensions and such.
View 2 Replies
View Related
May 23, 2013
I am working on a project to assign balloons to components in drawing view automatically. Of course, I don't want to assign a balloon to a component which is invisible (hidden) in this drawing view.
So, is there any API function to check whether the component in the drawing view is invisible or hidden?
View 2 Replies
View Related
Feb 15, 2013
At my company we use part numbers as file names for everything. for example, part number 09090P00100000, will be saved as 09090P00100000.ipt and will have a drawing saved as 09090P00100000.idw.
Within the drawing template file, i want to set up an ilogic rule that will check that the part present in the drawing corresponds to the file name of the drawing. This rule will run after saving and will just display a warning if the file names do not correspond.
I just need some code that will get the file name of the part displayed in the drawing. Note that we use iparts so the code must get the member file name and not the factory file name.
Dim oDrawingDoc As DrawingDocument
oDrawingDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDrawingDoc.ActiveSheet
[Code] ........
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 8 Replies
View Related
May 20, 2012
You can't copy a sheet within a drawing to duplicate it. So, as a workaround, I saved a copy of the drawing to a different name and tried to copy a sheet back. Pick the view in the browser, right click, copy. Switch to the original drawing, right click paste in the browser. All I keep getting is an error "Invalid input for Request." I even think I remember getting this error before and finding a way around it.
View 3 Replies
View Related
Apr 19, 2013
have 2 questions
1.) If you look at the attached screenshot in the Edit Sheet form there is a sheet "Revision" input field is it possible to fill this out via iLogic?
2.) We have some custom E size sheets (height always 34in width varies 5ft, 6ft, and 8ft) when we select on of these sheet sizes that we created it will display "Custom Size (inch)" when using the sheet property <sheet size> in the title block not the name of that we gave these sheets (Which creatively enough is "E-5ft", "E-6ft", and "E-8ft"). I thought I had this solved by doing this:
Dim oSheetSize As String
oSheetSize = ActiveSheet.Size
If oSheetSize = "Custom" Then
iProperties.Value("Custom", "SheetSize") = "E"
Else iProperties.Value("Custom", "SheetSize") = oSheetSize
End If
then change the titleblock sheet size field from sheet property <sheet size> to custom drawing properties <SheetSize> this all works great if there is only 1 sheet in the IDW where it fails is if there is more then one sheet.
View 2 Replies
View Related
Jul 13, 2013
I have a complex part and make a drawing. i want to make sections and details and to put some of them in another sheet in the same file. Also, can i put the hole table in another sheet?
View 1 Replies
View Related
Aug 8, 2012
Is there a way, using VBA to get the sheet size of a drawing without opening the drawing? I know how to get it with the drawing open, so alternatively, is there a way to open all the drawings in a folder, one at a time, then get sheet.size, then close and open the next?
View 3 Replies
View Related
Apr 19, 2010
I am running inventor 2010 suite with service pack 2 and when I try to insert a JPEG or BMP into a Drawing Sheet (not a sketch on a part file), the image does not appear. I have done this on previous versions numerous times and it worked perfectly fine.
The message which appears on the screen says "TEMPEMBED.BMP" and it has a photoshop CS4 logo. When I do a print preview, nothing appears on the page. I have opened up a previous drawing sheet, which has a JPEG & BMP inserted and the image is shown, but when I try to insert another image on the same drawing sheet, the same thing happens.
I am running a pretty fast machine, with an intel i7 processor and a pretty hardcore graphic card.
View 7 Replies
View Related
May 7, 2012
I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
View 7 Replies
View Related
Jun 14, 2012
I have 4 different sized drawing templates made, one each for A,B,C and D size. There are times when I start a drawing on a C size border/sheet and it gets too cluttered as I add views or annotations. Is there any way to insert/change the sheet size to the D sized template without starting over?
View 6 Replies
View Related
Sep 20, 2012
I have created a bunch of sheet metal rules for my different gauge thicknesses. Is there a way I can propogate the gauge information to my drawing so that if I were to change the gauge, that info would also update on my drawing sheet? The only thing I can get to work currently is to pull in the material used, but that doesn't include the gauge.
View 9 Replies
View Related
Jul 2, 2013
Just trying to add an existing symbol to a drawing sheet. I know i'm not formating the point correctly and i get a position error. How can i get the point location of two intersecting lines in my border to hard code the location?
Error:
Error on Line 18 : Argument not specified for parameter 'Position' of 'Public Function Add(SketchedSymbolDefinition As Object, Position As Inventor.Point2d, [Rotation As Double = 0.0], [Scale As Double = 1.0], [PromptStrings As Object]) As Inventor.SketchedSymbol'.
Error on Line 18 : End of statement expected.
DimoApp As Inventor.Application=ThisApplication
DimthisIDW As DrawingDocument=oApp.ActiveDocument
oSheet=thisIDW.ActiveSheet
DimoSymDef As SketchedSymbolDefinition
oSymDef=thisIDW.SketchedSymbolDefinitions.Item("APPROVAL STAMP")myPoint=ThisApplication.TransientGeometry.CreatePoint2d(1, 6)
oSheet.SketchedSymbols.Add(oSymDef) ,myPoint
View 3 Replies
View Related
May 14, 2013
What is the code to select a drawing sheet by either its number or description but NOT both together?
Sometimes want need to select the first sheet by number 1 but the sheet description can change. and Sometimes we will need to select the sheet by its description but the sheet number may vary.
View 7 Replies
View Related
Aug 22, 2012
Any way to make the drawing "sheet number", on which a "part" or "assembly" detail appears, show up in the "parts list"/"bom"?
I need to automate that information in order to prevent errors during revisions, and for company purposes.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 7 Replies
View Related
Jun 10, 2012
I have little question that, is it possible to change background colour of drawing sheet in inventor?
I have to change background colour white to black ( as in autocad) .
If it is possible pls where is setting in how to do it?.
View 3 Replies
View Related
Sep 27, 2012
how to access the drawing sheet revisions using Ilogic.My company is wanting to start making the default initial rev on a drawing a "-" and inventor does not like to keep this when brought in as a template.
So like normal I am trying to trick it into having the dash until a rev is actually added.
View 1 Replies
View Related
May 3, 2012
I have Autodesk Inventor on a student license, and I use the metric system.
I've been able to change the settings for parts, presentations and assemblies to use millimeters, but for some reason the drawing sheets still use inches.
How do I change the unit settings for drawing sheets?
View 5 Replies
View Related
Oct 24, 2012
I am writhig a macro to put text ( count number) under each occurrence in an assembly.
I got the Sequence correct and able to place the cnumber un drawing sheet.
But What I need to do is to place that number under consequent occurrence.
find the Image file and you will see wht i am trying to get.
i am icluding the Macro i written as well.
Private Sub RHSnumbering()
Dim oDrawingDoc As DrawingDocument
If ThisApplication.ActiveDocument.DocumentType <> kDrawingDocumentObject Then
[Code].....
View 1 Replies
View Related
Dec 18, 2012
How can I define a Point2D with my mouse by clicking on an random place in a drawingsheet?
I have made the code below that creates a DetailDrawingView automatic. I am now searching a method to select the oPoint & oCenterPoint with my mouse. Both are defined as Poin2D.
I find a lot a method's where you can manipulate the Point2D using maths but I never found a method where you can get the Point2D by just clicking somewhere on the sheet (drawingview).
Sub AutoDetailedView()' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the active sheet. Dim oSheet As Sheet Set oSheet = oDrawDoc.ActiveSheet ' Manually select a drawing view Dim oDrawingView As DrawingView
[Code] ........
View 7 Replies
View Related
Dec 11, 2012
How to reference the drawign sheet number using iLogic? I see on the snippets on the side a way to reference the sheet name, but I only want the number. To get the name it is ActiveSheet.Name, but ActiveSheet.Number does not work. Getting the name give something like ASSM:1, so if there was a way to take that and subtract the colon and everything before it that would work also. I am not a programmer, I've just taked some programs I found online and modified them a little to do what I want to do, but this is holding me back a bit.
Overall, I'm trying to modify the drawing view label to have a project number, referenced from the drawign iProperties, a view label, and sheet number, and then save that info in an iproperty of the part, and then reference that in the BOM so it automatically labels all of the views and fills out a column of the BOM to reference which page and view to find the parts of the assembly. I have everything working except for the sheet number.
View 5 Replies
View Related
Jan 7, 2014
I am trying to link excel file to drawing file (idw), but couldn't succeed.
View 2 Replies
View Related
Feb 15, 2011
Let's say I have two independent drawings one with a single part and 1 with an assembly + parts list containing the single part.
So I would like to have an item note on the drawing sheet with the single part referring to the assy drawing, part number & Quantity for this item in the parts list.
View 5 Replies
View Related
Sep 11, 2013
I'm trying to set up a company drawing sheet that requires the designer to select the sheet size before starting the drawing. Based on the drawing sheet size (A0, A1, A2, A3 & A4 all in landscape) the relevant company Title block will attach to the bottom right of the drawing border. I've manage to create the relevant forms for parts, sheet metal and assemblies.
View 8 Replies
View Related
Nov 13, 2013
Using ISO.idw template I created into a sheet a Sketch which contains a hatch. Now I want to delete that hatch and I don't find anywhere how to delete it.
The second problem is this: I want to create in multiple sheets the same drawing but with small differences. How to copy a drawing from a sheet to another sheet. I press right click on the first sheet and i press Copy but there's no Paste button.
View 1 Replies
View Related
Jun 18, 2012
How do I show detailed drawings of all weldments onto one drawing sheet? I have created a weldment assembly of various pipes attached together and would like to create shop drawings. Please see attached picture for model tree. I can't seem to bring in seperate views of each of the pipes on the same drawing sheet for proper detailing. Do I have to do something before making the assembly or afterwards to get those views?
CAD: Autodesk Inventor 2013
O/P: Windows 7 64-Bit
View 7 Replies
View Related
