I've got ObjectIds of a bunch of arcs that I need to convert to polylines for further processing.
I was thinking of using the COM interface and sending the PEDIT command and converting the arcs.
The only problem is I don't know of a way to put the objectids into a selection set, then call the pedit command and use the previous selection.
I want to turn this shape on the left, into one like the one on the right... i.e., not so many points.
I basically want to convert the polylines into arcs or something. i can do this by redrawing, thats no problem, but this is a very simple drawing compared to what i normally have to deal with, this is just an example.
I have many segmented polylines that I need to turn into arcs. See the attached image for the method I use to create an arc from a single polyline. I need to do this to thousands of polylines. Does some other method that can do many polylines at once?
View 5 Replies View RelatedAny plug-ins out there that focus solely on this?
View 2 Replies View RelatedI have some polylines that mark the edge of roadway and around the curves there are arcs in the linework. How do I turn the polyline with arcs in it into a polyline with vertices, say, every .5' or so along the curve and turn the curve into a polyline? I tried the pedit and using decurve but it doesn't work well.
Using C3D 2012
I am trying to extrude some joined polylines, arcs etc. The problem is some of them are extruding as a solid, which is what I want and some are extruding as a surface of the profile.
View 8 Replies View RelatedI have drawn several shapes including simple ones like rectangles with the corners filleted to 2" radii and ones shaped like a jelly bean using a combination of polylines, straightlines and arcs.
In my ACAD LT 2005 files, the arcs, fillets and polylines all appear very smooth (I set the display setting to 10,000) after I saw that the arcs had noticeable facets (like a diamond) when zoomed in.
My problem is that when I send these DXF files to my CNC router technician and he imports them into his program (EnRoute V.5). All of those arcs, fillets, and polylines still have those facets in them and do not appear smooth. When we actually cut plywood from these files, the pieces are in fact choppy.
My question- besides the display settings, is there a setting that I can change that will increase the number of control points that make up these curves that would smooth these facets out?
How to draw 3D polylines, or convert single lines to polylines?
this.JPG
There is a AutoLISP for extract START and END coordinates in X, Y, and Z planes, and extract length of Polylines and Arcs.?
View 7 Replies View RelatedHow can I convert arcs to splines.
View 5 Replies View RelatedI have a giant polyline containing a mix of arcs and straight segments, and I would like to convert all of the arcs into a series of small, straight lines so that I can use the polyline with a plug-in I wrote to use the polyline as a selection polygon.
Someone mentioned something about WMFOUT and WMFIN but that gave me some pretty weird, wobbly lines as a result and plus it didn't scale things the same when I used WMFIN.
How can i convert more polylines to one?
View 4 Replies View RelatedI'm in search of a way to convert mpolygon objects to polylines in a way so they stay on its original layer. We use Layer Explode (lexplode) from Vianova but it doesn't work with Autocad Map 3D and they are not planning to develop it.
View 6 Replies View RelatedFor my project, i'd like to convert Mtext into polylines (or lines or other...) with vb.net (why? because my company is working with laser, and laser can't write text like this, we have to convert it into lines/arcs/splines etc...)
View 6 Replies View RelatedOn my file I have some polylines that are the streets. So, they look like rectangles and curves, etc. I am working also on a 3D Model, and what I have to do next is to extrude them. The problem is that those polylines are not polygons, and so, they are not solids when I extrude them. I tried to use the command BO but it says that the lines are not closed, and I checked with OSNAP and they are! Is there any way to convert those polylines into polygons?
View 2 Replies View Relatedhow to convert a bunch of lines into one continuous polyline?
View 9 Replies View RelatedI have a contour set created using polylines and I want to convert this to points. Can I do this in AutoCad 3D Map?
View 3 Replies View RelatedIs there a method of converting ellipses to polylines?
View 4 Replies View Relatedhow do I convert a section that I created using an alignment and surface into a polyline. I want to be able to manipulate and easily use the section for another program.
View 1 Replies View RelatedHow do i convert a series of polylines to one closed polygon (so i can calculate an area, hatch it, etc)?
View 3 Replies View RelatedI need to convert all polylines on layer to blocks. Each polyline gets replaced with a block that is near the approximate center of polyline. it can also be at the first or last node of pline. or just near the center. (polylines are rectangular).
View 6 Replies View RelatedI have a drawing that started as a pipeline network and am trying to easily convert the pipes to polylines or something of the sort to export to shapefiles.
View 4 Replies View RelatedOn several occasions I have had to convert a group of lines to polylines but had to select and convert each line one after the other. Instead of one after another is there a way or a command to select all the lines and convert them as group into polylines?
View 7 Replies View Relatedis there any possiblity to convert the Polylines containing object data to a 3D Solid so that the object are also copied?
View 9 Replies View RelatedIn autocad 2013 is the best way still to convert data you have connected to, for example a shape file, as feature data in order to convert that into polylines and text is the best method saving it all as a seperate drawing using the "save as autocad drawing command"? Is there way to do it individually in the current drawing so that I do not always have to be saving things out as seperate drawings and then copy and pasting them back into my working drawing?
View 5 Replies View RelatedI drew a cube using polylines by changing ucs. I want to join the polylines so that the cube contour becomes one single object.
Since the lines are in different planes I can not join them. How could I unite those 12 lines so they become a cube non solid(I plan on placing a sphere inside some of the cubes and then use "shade" for visualization so if the cube is solid I won't see the spheres).
I need a function that allows to convert the polylines selected with a width globalize defined in a double closed line (spaced by the same width of the polyline), with a hatch inserted automatically defined.
Brilliant idea to draw raceways quickly: instead of making handmade double lines, connect, enter the hatches all by hand, you could quickly draw the polyline with width identical to the size of the duct, and then the lisp transform it into a duct more aesthetically pleasing if compared to the full polyline!
When converting metric 3d polylines to feature lines with units set on metric, drawing properties metric and using the australia/new zealand settings and command "create featureline from objects", for some reason the resulting 3d featurelines end up imperial?
View 2 Replies View RelatedAs the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
Is there a way of converting 3d polylines to polylines with an elevation?
I have a dwg of contour information, the contours are 3d polylines, because they are contours the z value is constant all along the line, so there no question what the elevation of the polyline would need to be.
I need to do this as I then need to import the dwg into a GIS programme called MapInfo whch doesn't read 3d polylines.
I have access to AutoCAD 2004 or 2005LT.
we used AutoCad LT 98 & hasn't changed when opening the same files in LT 2014. All curved lines (arcs) that occur in a recently-opened file look like two straight lines with an angle at the mid-point, so that from a distance they still resemble an arc but not at all when zoomed in. When clicking on the control points, it goes to looking like a proper arc, but the change doesn't hold after the file is saved and reopened. Is there a program-wide setting to change, or do the properties of each arc need to be changed individually?
View 3 Replies View Related