AutoCAD Map 3D :: Convert Connected Feature Data To Real Polylines And Text
Oct 31, 2012
In autocad 2013 is the best way still to convert data you have connected to, for example a shape file, as feature data in order to convert that into polylines and text is the best method saving it all as a seperate drawing using the "save as autocad drawing command"? Is there way to do it individually in the current drawing so that I do not always have to be saving things out as seperate drawings and then copy and pasting them back into my working drawing?
View 5 Replies
ADVERTISEMENT
Sep 15, 2011
is there any possiblity to convert the Polylines containing object data to a 3D Solid so that the object are also copied?
View 9 Replies
View Related
May 9, 2013
When converting metric 3d polylines to feature lines with units set on metric, drawing properties metric and using the australia/new zealand settings and command "create featureline from objects", for some reason the resulting 3d featurelines end up imperial?
View 2 Replies
View Related
Oct 10, 2011
For my project, i'd like to convert Mtext into polylines (or lines or other...) with vb.net (why? because my company is working with laser, and laser can't write text like this, we have to convert it into lines/arcs/splines etc...)
View 6 Replies
View Related
Oct 9, 2013
How to draw 3D polylines, or convert single lines to polylines?
this.JPG
View 7 Replies
View Related
Dec 5, 2012
I am working with a country grid shape file that has 2994 grid numbers. I am trying to convert the shape file to an autocad image. However, about one-third of the feature ID's do not save into the new autocad drawing. Is there a way to just select a portion of the shape file to convert into a drawing? Or just convert all the feature id's and not the grid shapes?
View 4 Replies
View Related
Mar 18, 2011
I accessed an aerial image through data connect, adjust the the georeferencing, etc. Image comes in fine and no problems...
One day, I re-open the same file and the data-connected image is gone!
I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."
View 5 Replies
View Related
Jan 2, 2014
As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
View 2 Replies
View Related
Jun 16, 2011
I have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
View 4 Replies
View Related
Nov 19, 2013
I have MAP3d 2014 drawings with object data attached. I also need to be able to see the data as text. In map 3d it is a straightforward exercise. I go to task pane> Data> add drawing layer..I select the layer I want data to display and I select the object properties, change the TextLabel into the required field and I have readable on the screen text.. However this text does not behave like text at all..If I edit it, it disappears or reverts back to the original text. When I open in normal CAD of course it is not readable...
How can I convert this MAP3D data label text into an AutoCad, editable text for everyone to see and edit.
View 3 Replies
View Related
Apr 24, 2012
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
View 3 Replies
View Related
Aug 19, 2011
I am using two different types of raster ECW and MrSid. ECW file resolution goes way down when plotting. They look like blocks. MrSid files look fuzzy but alot better than ECWs. I've tried RASTERTHRESHOLD, and RASTERPERCENT. Both are set to 90. Using HP6100ps.
Images are fine when using Imageinsert.
Is there a setting i'm missing somewhere for them?
View 3 Replies
View Related
Jun 18, 2012
i want to convert autocad drawing which indicates water depth data as text into txt format...x reference and y reference and the digital value indicated at the reference in xyz format...
View 3 Replies
View Related
Oct 30, 2013
I have several featurelines that I wish to explode to be 3D Polylines (bad, I know, but it's a test for a way to get data across from our design group to our survey group).
Last week, in this drawing, I exploded a large selection of featurelines and they all became 3D polylines, preserving their elevation data. This week, I drew an additional set of featurelines in the same drawing. When I explode them once, they lose all elevation data, becoming lpolylines at z=0. Additionally, the Prospector shows me several errors: "breaklines not added to surface" or something similar. Which is an odd result for the explode command.
Why did this work once but not a second time?
Win 7E 64-bit, Intel i7, 12 GB C3D 2012
View 9 Replies
View Related
Jan 20, 2012
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies
View Related
Jun 9, 2011
We need to take polylines from AutoCAD Map 3D to 3ds Max and rename each polyline to have a name of something like "Building Number-Room Number", both of which are defined in our properties for each polyline. Because none of this data is kept on import to Max, we need to do this all in Map 3D, which we are not experienced with. Is there a way to do this, and if so what? We are importing the .dwg files in Max with polylines as splines.
View 2 Replies
View Related
Aug 3, 2013
I have experienced that when restoring a catalogbackup, all data connected to each picture is gone, and i have to use many hours to organize once more.
View 2 Replies
View Related
Jan 4, 2012
How can i convert more polylines to one?
View 4 Replies
View Related
Nov 27, 2013
I'm in search of a way to convert mpolygon objects to polylines in a way so they stay on its original layer. We use Layer Explode (lexplode) from Vianova but it doesn't work with Autocad Map 3D and they are not planning to develop it.
View 6 Replies
View Related
Jun 25, 2011
I've got ObjectIds of a bunch of arcs that I need to convert to polylines for further processing.
I was thinking of using the COM interface and sending the PEDIT command and converting the arcs.
The only problem is I don't know of a way to put the objectids into a selection set, then call the pedit command and use the previous selection.
View 4 Replies
View Related
Sep 20, 2012
On my file I have some polylines that are the streets. So, they look like rectangles and curves, etc. I am working also on a 3D Model, and what I have to do next is to extrude them. The problem is that those polylines are not polygons, and so, they are not solids when I extrude them. I tried to use the command BO but it says that the lines are not closed, and I checked with OSNAP and they are! Is there any way to convert those polylines into polygons?
View 2 Replies
View Related
Jul 15, 2011
how to convert a bunch of lines into one continuous polyline?
View 9 Replies
View Related
Feb 15, 2013
I want to create a road map using the survey data. Iv'e got some examples attached below.
How to create such type of drawings in autocad civil 3d.
View 2 Replies
View Related
Apr 26, 2013
I would like an VB application that from within autocad can open an excel file,from there select 2 columns containing x,y co-ordinates. Which when selected will draw a polyline in the acad drawing.
I usually do this the long way, but it seems I'm doing it more and more so would like to have it fairly automated.New to VBA and stuck at even opening the excel file....nevermind the actual selecting columns and drawing of the polyline!!!
View 4 Replies
View Related
May 18, 2012
I have a contour set created using polylines and I want to convert this to points. Can I do this in AutoCad 3D Map?
View 3 Replies
View Related
May 6, 2013
I want to turn this shape on the left, into one like the one on the right... i.e., not so many points.
I basically want to convert the polylines into arcs or something. i can do this by redrawing, thats no problem, but this is a very simple drawing compared to what i normally have to deal with, this is just an example.
View 3 Replies
View Related
Oct 13, 2013
Is there a method of converting ellipses to polylines?
View 4 Replies
View Related
Jun 5, 2012
how do I convert a section that I created using an alignment and surface into a polyline. I want to be able to manipulate and easily use the section for another program.
View 1 Replies
View Related
Feb 4, 2011
How do i convert a series of polylines to one closed polygon (so i can calculate an area, hatch it, etc)?
View 3 Replies
View Related
Mar 17, 2011
I need to convert all polylines on layer to blocks. Each polyline gets replaced with a block that is near the approximate center of polyline. it can also be at the first or last node of pline. or just near the center. (polylines are rectangular).
View 6 Replies
View Related
May 17, 2011
I have polylines that when selected, under properties it lists Object Data for the selected polyline. There are like 10 categories. This drawing is actually creeks in a county and they have object data connected to them where some are "a" some are "b" classification and I want to select all of the "a" polylines and put on a diffrent layer.
View 1 Replies
View Related
