I accessed an aerial image through data connect, adjust the the georeferencing, etc. Image comes in fine and no problems...
One day, I re-open the same file and the data-connected image is gone!
I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."
I am using two different types of raster ECW and MrSid. ECW file resolution goes way down when plotting. They look like blocks. MrSid files look fuzzy but alot better than ECWs. I've tried RASTERTHRESHOLD, and RASTERPERCENT. Both are set to 90. Using HP6100ps.
Images are fine when using Imageinsert.
Is there a setting i'm missing somewhere for them?
In autocad 2013 is the best way still to convert data you have connected to, for example a shape file, as feature data in order to convert that into polylines and text is the best method saving it all as a seperate drawing using the "save as autocad drawing command"? Is there way to do it individually in the current drawing so that I do not always have to be saving things out as seperate drawings and then copy and pasting them back into my working drawing?
View 5 Replies View RelatedI have experienced that when restoring a catalogbackup, all data connected to each picture is gone, and i have to use many hours to organize once more.
View 2 Replies View RelatedI have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies View RelatedUp until recently I have been continuing to use VS9 for creating DVDs but I use X2 for editing and rendering video files. I have now created templates in X2 but the video files that are displayed at the bottom of the 1st DVD menu has now twice disappeared relating to 2 DVDs (so 4 times).
The VSP files are 2.0MB and 2.5MB so the data seems to be there but are empty when calling up the DVD menu. My video files are in an external file but that has never been a problem with VS9 and I can't see that being the problem.
All works fine on the day I create them and I can sut down and reopen VS without trouble. When I log on another day all the data is gone. I have wasted many hours and am at the end of my tether.
I've tried both draging an image into Autocad and importing it in as a block. When I try to rotates the image it either rotates around a point (but doesn't actually rotate itself) or rotates and disappears only leaving a white outline. How can I properly rotate an image?
View 3 Replies View RelatedOne of our other issue(s) is the z ucs rotate in a vp and the image disappears!
Im thinking its to do with a slight angle change in the x or y plane when doing a z ucs rotate making the image not on the viewing plane anymore. Using 2011 map3d but using in 2d workspace mode. All it would take is 0.000000001 degree to throw it out of wack i would imagine. When setting vp back to world and plan rotate it appears again?
Or, because its map3d and not just vanilla cad, is the whole world space set on a geoid by default(viewing plain) and when you rotate the vp ucs it throw's it out of alignment and puts it below the geoid and then looses it's visibility? This would apply to rasters imported with map/ import / ecw, tiffworld or 2jpg i assume?
i inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies View RelatedI am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
View 1 Replies View RelatedI have had CS6 for about a month. The past few days when I click to use crop, magic wand etc my photo disappears from the screen. The screen is black.
View 12 Replies View RelatedWhen using the crop tool, and I expand the cropped area outside the original image, the image disappears and the area turns white. How do I turn what ever "feature" this is off?
View 2 Replies View RelatedI have an assignment for school where I am suppose to trace an eagle onto another layer. However the image disappears while I am trying to trace it. Is this some sort of setting that I need to change?
View 6 Replies View RelatedToday I went to puppet warp a layer, and as soon as I placed the first pin, the image part of the puppet warp disappeared - only the mesh was visible. I can't figure out where to put pins or adjust my layer if I can't see the actual image!
Have been using puppet warp with my current system config for a long time with no issues, and had, in fact, puppet warped several things just a few minutes prior with no issues. I have tried after restarting, using hardly any system resources, and with all other layers visible, and hidden. No matter what I try, as soon as I place the first pin, only the mesh remains and I can't see what I'm trying to warp at all. !
In Photoshop CS6, all of a sudden my image disappears when I try to transform a selection.
View 5 Replies View Relatedphotoshop CS5
new 17" toshiba laptop (this was not a problem on my previous/old laptop)
2 gig Video Card: nVidia Gforce GT 630M/PCIe/SSE2
12 gigs of ram
First ?:
How do I get drawings I've just opened to float (rather than pin themselves to the top left of ph-shop?
Second ?:
When I open a photo.... work on it.... open a second photo....It opens and appears as a blank pallet, (as if there's no picture) but.... when I grab and move the image window with my cursor at the top border, the image appears... then when I release it placing it where I want to move it... the image disappears again. The image is visable the WHOLE time within the navigator panel.
I then have to restart CS5 in order to fix it... but then it'll happen 10 minutes later.
I'm modeling something and when I go to wireframe the background image disappears.
"Two hours of loose philosophizing will never tilt the scales against a sound belch."
getting a weird problem. at first when I had 2 image planes (front and side) every time I saved my scene and restarted, they would both disappear from perspective view. but they were still showing in ortho view. I'd have to delete the image plane and make it again. after adding a back camera with its own image, saving and restarting: it started to have all of them show in perspective, but now front and side dont show in ortho.
edit:: the first issue happens in 2011. the second in 2012. back cam probably has nothing to do with it.
I have just downloaded Gimp on my iMac and when I drag an image onto the Gimp screen Gimp just disappears.
View 1 Replies View RelatedI opened an image, scaled it, changed the canvas size and pasted another image into it. When I move new image below the original image (where the gray checker board is located) the new image disappears.
I finally closed everything and started over. Same results.
Now what?
I have an image opened in PS CS6 I can see the image I select the Crop Tool The image dissapears completaly from the screen I select any other tool The image reappears again.
View 4 Replies View Relatedevery time I export my cdr file to a jpg, all but a small portion of the picture disappear. I've tried saving it in other formats and a few other things, but none have been successful. I've included print screens of what the picture should look like, what it does look like, and the export setting I've been using.
View 5 Replies View RelatedI'm a Gimp newbie, using 2.8.4. I have a png image that's 530 pixels wide. I'm trying to merge it with a white background layer that is 960 pixels wide. I need to align the image to the right side of the background layer. This is what I did:
- opened my image
- created background layer (960 px wide)
- made background layer the bottom layer
- clicked on Alignment tool
- clicked the hand cursor on the image (530 px wide)
- made the background layer the active layer
- set "Relative to:" Active layer
- clicked on the right alignment arrow
The image did move to where I wanted it, but most of the image from the right edge disappeared, so all I've got is a small portion of the left side of the image in the middle of my background layer. Then I did the following:
- merged visible layers with Expand as necessary
That action merged the layers, but all I have is a small part of my image near the center of the background.
Attached File(s) Screenshot from 2013-06-25 19:41:24.png (59.32K)
I am having a problem that may be a simple solve (but not for me). My image disappears after applying a rectangle to it. I have tried "bring to front" and don't know what else to try.
View 1 Replies View RelatedAfter intalling my new mouse (Logitech Corded Mouse M500) scrolling/resizing makes the image disappear in a short time 2-3 minutes. I read about it in older versions, only happens with this mouse.
How can I fix it? I've just brought the mouse, seems very good, the older one is unuseable (lacks accurancy due the cheap IR sensor).
When I crop a cdr image, part of the image disappears within the crop window. Clicking inside the cropped image reveals node locations as if the image is still there but the black lines are invisible. But, there are some objects visible in the cropped image.
View 3 Replies View RelatedI am using LR 4.4 on an iMac. Why the White Balance Selector tool would disappear when moved across an image?
it seems to change to a vertical line with an arror top and bottom.
The areas of the image on which it disappears seem to be consistent, in other words, it disappears on the same portion of the image eveytime.
UPDATE: Since posting the above a few minutes ago I've noticed that my cursor is behaving eractically. For example, on a different image to the one used above, in the library module using the Loupe the cursor changes from a magnifying glass to an arrow pointing to the right. It does this on the same part of the image every time.
After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
I am new to autocad and robotics student.. I have 3D data in text file, obtained from MATLAB software. 3D data contains 3 columns x,y and z, and 15000 rows..
So, now i want to create 3D image from that data in Autocad, Can i create..? If Autocad doesn't support text file than i can conver this data in Excel file also..
I have attached my text file here.. [URL]...
i am going to calculate the cost estimation for civil engineering process.so i have to retrieve the data from autocad or 3d max images.how can i retrieve the data from 3d images.
View 5 Replies View RelatedIf it is possible to download images to my hard drive so that I have connected to a WMS server to obtain? Basically I am wanting to be able to send an autocad drawing with an aerial image to someone that does not have autocad map, and wanted to know how I can download the image so that I can send it to the person with the autocad drawing so that they can see the same aerial image that i do.
View 6 Replies View Related