i inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 RepliesThe AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm modeling something and when I go to wireframe the background image disappears.
"Two hours of loose philosophizing will never tilt the scales against a sound belch."
I have a georeferenced drawing with aerial photos and linework that I have Xref'd in a recent survey drawing. I checked that the coordinate systems match and the xref shows that it is loaded and the layers are listed as on and thawed.
However, the xref is not visible.
I tried a new blank drawing using the Map 3D template, same coordinate system. Same thing happens. However, this time, I noticed that the xref is visible when zoomed out. When I zoom in, it disappears. Screen shot attached.
When i use panning in 2D mode the drawing disappears from my viewport. Autocad and all tools are still visible but there is nothing in drawing screen. When i zoom extent(z+e) it comes back again but in a couple minutes it disappears again while i am panning.
View 9 Replies View RelatedBelow is the image of my ribbon after I begin the edit boundary command for a floor slab. For some reason the ability to finish or cancel the edit mode disappears and I'm unable to close out of the command without undoing everything I've done.
View 9 Replies View RelatedWhen I turn on shadow or realistic mode in 3ds max my model disappears, but it will show in wireframe. How can I fix this? to see it in realistic I have to render it and it comes out fine.
Using max 2013.
When i type in the Geomap command, i get the option for Aerial, Hybrid, Road, off. No matter which selection i make, the imagery will not load. I go to someone elses machine and open the same drawing, the imagery loads.Am i missing a setting somewhere?
View 4 Replies View RelatedWhen I insert a location in CAD2014, there is a dialog for me to chose the position, the default coordinate is WGS84, and of couse there is a list for options. but if there still have no system I need. how can I add the one into this list ?
View 4 Replies View RelatedIs there a way to force the option to zoom extents on Isolate mode to be OFF by default? Its great they added this feature but I don't want to enter the miserable "enhanced" menu system to turn it off every time.
View 2 Replies View RelatedI've tried both draging an image into Autocad and importing it in as a block. When I try to rotates the image it either rotates around a point (but doesn't actually rotate itself) or rotates and disappears only leaving a white outline. How can I properly rotate an image?
View 3 Replies View RelatedOne of our other issue(s) is the z ucs rotate in a vp and the image disappears!
Im thinking its to do with a slight angle change in the x or y plane when doing a z ucs rotate making the image not on the viewing plane anymore. Using 2011 map3d but using in 2d workspace mode. All it would take is 0.000000001 degree to throw it out of wack i would imagine. When setting vp back to world and plan rotate it appears again?
Or, because its map3d and not just vanilla cad, is the whole world space set on a geoid by default(viewing plain) and when you rotate the vp ucs it throw's it out of alignment and puts it below the geoid and then looses it's visibility? This would apply to rasters imported with map/ import / ecw, tiffworld or 2jpg i assume?
I accessed an aerial image through data connect, adjust the the georeferencing, etc. Image comes in fine and no problems...
One day, I re-open the same file and the data-connected image is gone!
I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."
When I open my profile file in civil 3d 2014 the grid disappears so I regenerate it and they are back. The problem I am having is when I run my cursor over the grid, it will give me a fatal error.
View 5 Replies View RelatedAll of my points vanish after I use 3dorbit, how to reproduce this? I have been able to make it happen in 2 different drawing, unless I just forgot how to search the board altogether.
My points still show up in the toolspace point list but auditing and regening does not bring them back to the drawing.
I'm having some trouble with .fbk files disappearing after I import them. I'm sure I am missing a setting somewhere but I don't know where. I have a (slightly clunky) workaround on setting things up correctly.
We went straight from LDD 08 to Civil 3d 13 so it is a bit of a learning curve.
I am trying to use Civil 3d 2013 with Trimble Link. My procedure is to download the file with trimble link and then follow the wizard from there. My .fbk imports fine, but if I need to edit anything I find that it is missing from the folder that I just imported it from.
If I copy and rename the .fbk prior to importing it I can import and edit the re-named file no problem, it just seems to be the initial import done by the wizard that deletes the file.
Stationing still disappears in viewports.
Centerline alignments are in my BASE file.Got the station labeling to work correctly.Have the BASE file x-ref'd into a working IMP file (for plan & profile sheets). This is what I plot from, etc.The station labeling appears fine in modelspace in the IMP file.The station labeling disappears in viewports in paperspace in the IMP file. Will not appear even when I am in MS mode in paperspace and in the viewport itself.All the associated layers are turned on and thawed, even VP-specific settings. REGENALL does not work. Annotation scale is set to 1"=30' in all files.I always scale my border up to the plot scale in paperspace. This is a habit that goes back almost two decades in LDD.
Maybe a setting regarding plot/annotation scales is the culprit? By playing around with the buttons in the lower right corner of the screen I got them to show up once by accident then they disappeared again when I did a simple REDRAW. I do not remember how I got there, but the process was convoluted and probably not optimal or correct.I am using Civil 3D 2011, btw.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
Every time I switch from my "Civil3d" workspace to "3D Modeling" and back again, all my toolbars disappear. Not the end of the world but certainly a pain in the butt.
View 4 Replies View RelatedI have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies View RelatedI created a DWG with Civil 3D. When it is viewed with LT or TrueView the contours for the surface disappears. I checked the detail switch on the VIEW tab but it did not seem to make any difference.
Is this a function of LT and TrueView?
why the text and leaders placed over viewports (in paperspace) keeps disappearing? The text is still there...just not visible. i can select the text with no problem. and if i move it off of the viewport then i can see it just fine. this is happening with all the viewports in my drawings... on all tabs. If i close the drawing and reopen then all the text appears again.....but when i switch tabs then come back...the text vanishes again.
View 2 Replies View RelatedThe contour values when place on the the render material of rock image it disappears so I had to place it on the side. how the image is use a render material?
View 1 Replies View RelatedWe are working together with another firm here in town. The are doing the road and we are doing the utilities. They have established the alignments and profiles. When I import them all the data comes in. For whatever reason I do not have their profile views so I create my own profile view and put their profiles in them.
When they send an updated .xml file of all the alignments and profiles, they import okay but my profile views disappear. I assume it's because in their .xml file that I import, there are no profile view defined.
Is there an options when you export and alignment to an .xml file that you can include the profile views with it as well? This way when I import them I would get them.
After adding 9 or so breaklines, the display of my surface (e.g. contours) disappears when I add the next breakline. Based on the surface elevation shown at the pointer location, the breakline seems to have been added and the surface rebuilt.
View 3 Replies View RelatedDrawing disappear after using a dynamic block's stretch parameter?
I’ve made fairly simple dynamic blocks with lines or leaders that can be stretched and some attribute text. After moving the stretch grip of the block the block will disappear. If I then do a regen the entire drawing disappears. But it seems to be only a graphical glitch based on the fact that I can then save the disappeared drawing, reopen it and everything is up to date. I can even see my devious little dynamic blocks. But of course if I try to edit them everything will disappear again.
I have had CS6 for about a month. The past few days when I click to use crop, magic wand etc my photo disappears from the screen. The screen is black.
View 12 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedIn LDT there was a command "zoom To point" that allowed me to type in the point to zoom to that point. The only way I am able to do this now is scroll through the point groups or point to zoom to a point.
Is there a zoom to point command inside of C3D that is more efficient than scrolling through a point list?
When using the crop tool, and I expand the cropped area outside the original image, the image disappears and the area turns white. How do I turn what ever "feature" this is off?
View 2 Replies View RelatedI have an assignment for school where I am suppose to trace an eagle onto another layer. However the image disappears while I am trying to trace it. Is this some sort of setting that I need to change?
View 6 Replies View Relatedwhen i zoom extents, my dwg gets very small and hids in a corner...as if there is something else on the page way off in space. i've tried to find it but theres nothing visible. everything is thawed/on and there are no wipeout frames. i tried to Erase All...then deselect my drawing...but still nothing.
View 9 Replies View Related