In LDT there was a command "zoom To point" that allowed me to type in the point to zoom to that point. The only way I am able to do this now is scroll through the point groups or point to zoom to a point.
Is there a zoom to point command inside of C3D that is more efficient than scrolling through a point list?
I have included a button with the same function that "zoomSta" from dotsoft.It is at the end of the list (zoomsta): URL...However,I would like to show a temporal cross mark in point of zoom like command "zoomsta" does.
How can I show that mark and that mark disappears when I do zoom or regen?
I Posted This problem twice but it doesn't showed in the forum. I don't know why, whatever, My problem is making Array with a circle and a line[same as to radius]. When i use array between them to create 9 more lines, some lines are becomes bigger then the original line. why this happen? I attach a file to be understand clearly. Zoom the intersection point of lines and the circle.
View 3 Replies View RelatedThe good news is that, if I were righting a routine that locks up AutoCAD, I'm finished. The bad news is that I'm not.
The code below is the portion of a routine where I have the user select 2 points and then pass those points to the Zoom command and the M2P osnap. The problem is that, when the Mid Between 2 Points osnap tries to use the first point, it returnns an "Invalid point" message, enters a loop and locks ACAD.
(defun C:ZC ()
(setq PointOne (getpoint "First point of M2P "))
(setq PointTwo (getpoint "Second point of M2P "))
[Code].....
I have a drawing with various layouts that when I do a Zoom Extents the drawings is reduced to the size of a point.
I have done all the usual, ie: look for extra entities that are "out in space" so to speak and there are none.
I wonder if I have a block or image which may have an insertion point "out in space" and if this may be the issue.
Is there some way to Select all entities or Blocks (insertion point) that may exist outside a particular area ie: drawing limits.
I am sure I am not looking in the right place, but where has the setting to be able to zoom around mouse point gone, it used to be in the preferences.
View 1 Replies View RelatedCivil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIm still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedI have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View RelatedI have set "Zoom about mouse point" to "on" in Preferences for both ortho and perspective viewports. However, the function doesn't work in my perspective viewports.
View 3 Replies View RelatedHow to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
View 5 Replies View RelatedFirst time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
I am trying to get point 1234 to show a label that says Point #1234 and then in a grading plan have that same point show up as a spot elevation. I have tried making two point groups "Point #" and "Spot Grades" which include the same points in them with two different label styles for each group, however the point seems to only want to take one label style at a time.
C3D 2012
Win 7 x64
8 GB Ram
Quadro K4000
Question 1: Is it possible to change a Survey COGO point to a regular COGO point so you can edit the datum?
If not:
Question 2: Is it possible to transfer the survey database from one office to another so the end office can make datum changes to the survey COGO points. Will the link between the file and the database still apply?
C3D 2013
Windows 7 64 bit
when i zoom extents, my dwg gets very small and hids in a corner...as if there is something else on the page way off in space. i've tried to find it but theres nothing visible. everything is thawed/on and there are no wipeout frames. i tried to Erase All...then deselect my drawing...but still nothing.
View 9 Replies View RelatedLike entering a station and going there?I've used the 'SO with Zoom C. That is not simple.12+ miles of a single road alignment with 3 equation stations makes for a LOT of panning.
View 4 Replies View RelatedAny way to set the zoom scale or magnification to apply to when you click the "zoom to" command such as "zoom to point" or "zoom to object" ?
View 9 Replies View RelatedOut of the blue, my zoom on my middle wheel slowed down. So, now I have to spin my wheel at least 20 more times when I zoom in. The problem only occurs in Civil 3D not any other programs. How to fix my zoom?
View 2 Replies View RelatedThe AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
is there a way to not include zoom features in the undo command.
for instance, if i delete something and than zoom out, i have to undo multiple times to complete the undo delete.
I want to completely eliminate zoom featues from the undo command.
I loaded 2013 Civil 3D and I customized my Ribbon with Zoom Commands I use frequently; everything looked fine...I changed the Workspace to Planning & Analysis and cutomized my Ribbon to include the Zoom Commands but a Button Icon for ZOOM_TO_POINT came up with a cloud & question mark. I went to look for the Icon Image & I don't see it. I made the mistake of changing the Icon to another hoping I could change it back but it's not there. I went to the 2012 verison & the Button Icon is there...first icon listed. Where are the icons in 2012 so I can drag & drop image into 2013?
The icon has a point symbol with a magnifying glass. I've checked other computers and the same thing. Can't find the Image Icon for ZOOM_TO_POINT. It shows up when you load the software but if you want to edit it...it's not there in the CUI Button Icons.
I am using Civil 3D 2013, Windows 7 x64.
Intellizoom does not seem to work properly on certain drawings, where if I undo... nothing happens. Rather, it tries to undo *each* click of my scroll wheel, without doing anything. This results in dozens and hundreds of undo commands, most of which are totally useless. This of course breaks my undo command, rendering it almost pointless. If I make a change, zoom out and decide that the change is not needed, I cannot easily undo; I have to undo something like 50 "commands" that do nothing, before I get to the "real" undo that I wanted to undo in the first place.
I understand there is the "Combine zoom and pan commands"; this is checked off. It does not seem to do anything. How do I make my undo command useful again? As a keyboard user, I want to use ctrl-z for my undos. I do not want to go to the undo button, pull down the menu, and search trhough the 50 commands to find the correct command to undo to, especially since I never had this problem before in previous versions of Civil 3D.
Some additional information:
1. I can open some other drawings that get the correct undo/zoom behaviour.
2. I can open the drawing I have problems with using a previous version of Civil 3d (2012), and get the correct undo/zoom behaviour.
I can't zoom into a Geolocation Aerial Photos in Civil 3D 2014. I get "No Photo" background if I try to zoom in close enough to see.
View 4 Replies View Relatedi inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies View RelatedI am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedMy keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies View RelatedI have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstation is the ability to select and open an external DGN reference, and then match the view of the parent DGN, called the "EXCHANGE" command. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experiment with lisp or script and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, I have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature. I hesitate using the REFEDIT, which works fine for regular AutoCAD, but not so much for Civil 3D and the objects it creates (labels and other items with data shortcuts).
I am having a problem getting all the points I want to include in my DTM into a Point Group. The raw description inclusion of most double codes, codes with line designators and codes with size and description modifiers does not bring the points into the point group. (e.g. WL S, CLF E, PIN 18 where the description key set is created to size the pine tree by 18 and create a descriptor that says 18Inch Pine).
View 1 Replies View Related