I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 RepliesThe AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedMy keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
if you have used CS6 you may have noticed the Applications bar was removed. According to Adobe it was removed to make more vertical "real estate" for the workspace which makes no sense. When maximized it uses zero additional vertical space but that's another argument.
As part of the Applications bar, there was a drop down menu for a few preset zoom levels. 25, 50, 100 and 200. I got addicted to using this drop down for the work I do in PS and specifically 100 and 200% as I'm also zoomed in make minor changes and I want to jump to 100 or 200% to see what the changes look like at size or zoomed out.
drop down menu like that for zoom in CS6? I know the original shortcut ctrl-1 was for actual pixels but I have that and all the other keys close to the left ctrl/shift/alt used for other functions. I rarely take my right hand off the mouse as I work and that was the best way for me to zoom quick to 100%.
I've got a question that I'm sure has a very simple solution but I can't find it even though I've searched all over the place. Is there a way to change the default zoom level when Photoshop opens an image? I'm using CS2 on OSX (though the screenshots I've included to illustrate what I'm asking are from Win XP).
View 3 Replies View RelatedNow that the application bar has been dropped from CS6, the zoom level feedback is also gone in full screen mode. It would be nice to see zoom level feedback similar to how Pixelmator displays the level with each zoom in or out in the center of the frame.
The UI device is similar to the feedback that the new crop tool displays to show the changing image size.
When I Zoom in my drawing on a specific area and press F3 to come to the previous zoom level it doesn't happen. inspite of this drawing will zoom out with another sequence.
View 3 Replies View RelatedBeen using Xara Xtreme Pro 5 for several years and this is an issue that happens now. Parts of lines disappear in a drawing at different zoom levels. The drawing might look perfect at one zoom level, but if I zoom in from say 100% to 500% parts of lines disappear from the drawing. The fix is usually having to click on the line or zoom to a different %. I have attached a picture to show the issue. The hat on the left shows the missing part of the line (circled in red), and the hat on the right shows how the line actually is.
If this was happening in a pc game I would describe it as clipping. I'm on a Pentium 4 PC 3 GHz, Win XP SP 3 2 gigs of RAM. GeForce 6200 if this comes into play .
regain the upper menu icons from CS5.
View 21 Replies View RelatedI'd like it, if an image is re-sized to the same percentage as the current zoom level, afterward the zoom is automatically switched to 100%
Typically, if I have an image too big for it's intended use, I'd adjust the zoom until I get it to appear the right size, then resize it to the zoom level. (I imagine many people do the same thing). However, after resizing, the view of the image is really tiny, since the old zoom level is now being applied to the smaller image.
I use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.
Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.
Is there a way to change this zoom?
recently my zoom tool changed from default zoom in + to zoom out -
View 1 Replies View RelatedI can't find in new max (2013) settings for zoom. I want to set Zoom about mouse pointer and adjust a bit zoom speed (now it is too much for one mouse wheel step).
I can't find zoom settings in 3ds max 2013. Where they are? I think that in previous max it was in Customize -> Viewports tab. But now it is not there.
How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?). Also this seems slightly wrong given the amount of automation available.
If I zoom to page in an IDW the paper space does not fill the screen. On my screen I have 15mm of space between the paper and edge of workspace.
Is there a way to make this fill the workspace by whichever is the greater size (height or width) of paper? I just want the page to fill the screen more.
I highlighted some drawing curves in a drawing by the API and now I would like to "zoom fit" the highlighted set for a better visual effect.
View 5 Replies View RelatedI tried searching the forums for this topic but the search thing didn't seem to work.
A friend of mine installed Photoshop CS for me (an upgrade from 7.0) and for some reason I can't use CTRL + and CTRL - to zoom in and out, I have to use the mouse with the zoom tool which slows me down quite a bit over the course of 20 or so photo edits.
Can anyone shed some light on this? I checked Keyboard shortcuts in the preferences menu and they were correct. I've made no other changes to the program.
When I open my assemblys, It opens with a big Zoom in, and i cant see any thing!
I have to Zoom out every time... How can I repair this.
My company is using inventor 2010. I have 64 bit edition. When I zoom in on a dwg or ipt it zooms for like 1mm then my screen goes gray. If i click the restore down button then restore back to max drawing comes back but as soon as i try to scroll zoom again with my bamboo pen the screen grays out again. I've already updated my video driver to latest version and i've updated my bamboo pen driver to latest version. I also booted windows 7 64 bit into safe mode and check device manager to make sure no broken drivers or anything like that. Some times it will work for a few min then start graying out my screen again.
View 7 Replies View RelatedWhen I use AutoCAD Inventor:
* Rolling the mouse wheel toward me, the object zooms larger, and
* Rolling the mouse wheel away from my body, the object zooms smaller.
Just the opposite, when I use good ole' 2D AutoCAD and AutoCAD Electrical:
* Rolling the mouse wheel toward me, the object zooms smaller, and
* Rolling the mouse wheel away from my body, the object zooms larger.
Is it possible to change the zoom function in 2D AutoCAD and AutoCAD Electrical to operate in the same fashion as in Inventor . . .
If there is a way to setup in Autodesk Design Review so the line and text can look the same when it zoom in.
View 4 Replies View RelatedI'm using inventor 2010, In studio mode, I adjust the zoom or view that I want my camera to end with, when I click "Add camera action" bottom, that zoom change in or out,
View 1 Replies View RelatedIs there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.
View 6 Replies View RelatedAfter setting up a scene with a JBL lighting environment, I changed from orthogonal to perspective view for rendering.
Funnily I was not able to zoom in with perspective view activated. Zooming slows down and finally comes completely to halt. Switching back to orthogonal the camera jumps right into the object. Changing back I see everithing from a distance.
Is this normal or is this an error. I can´t remember if this happened before.
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
- Factory Design Suite Premium Subscription-
Having an issue where in a part model with the view set to "wireframe with hidden edges" the edges and hidden edges disappear when you try to zoom in on the part. Actually not working with "wireframe and visible edges only" at any zoom level either.
The edges are there and I know that there are features that should be showing up as hidden.
Running Quadro FX 3800 with the most current drivers, and I only noticed this when switching to IV 2014.
Also running IV Build 222 SP 1
This is making designing very hard as I can't tell anymore where there are instances of features interfering with each other.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
Is there a way to change the color on the Zoom Window Crosshair? I would like to make it darker to be more visable against my background..
View 4 Replies View RelatedI just re-installed Inventor 2014 on my computer.
Goto your Tools menu.
Select Application Options.
Click on the Display tab.
Under 3d Navigation section (very bottom), click the checkbox for Reverse Direction.
Windows 8.1 Pro 64-bit
Intel i7 870 @ 2.93 GHz
Nvidia GeForce 580 GTX 1536MB GDDR5
8 GB Ram
250GB HDD
How to zoom in and out via the API.
I can access the camera and eye etc. but cannot find the property related to zoom. I initially thought it was to do with the position of the eye but when I use the "Zoom" by dragging the mouse button I see that the eye position doesn't change.
I would like to connect the zoom to a slide bar and zoom in and out using that.
I am making an animation in Inventor Studio. I have created all my sequences for fading and constraint animations, and now I only need to move the camera around my assembly while zooming in and out with focus on the animations.
The way I have done it so far, is as following: Created a camera (Camera1).Set my view where I wanted the camera to start.Rightclick on Camera1 and set camera to view.Then go in a few seconds on my timeline, move my view to a new area and finally "Add camera action". I've done this a couple of times with success, but now I can't do it again.
As soon as I move my view to another area, and press "Add camera action", it does as intended, but now it zooms out, making the animated area small and hard to see. I want it to be zoomed in on a detailed area, but it's changing the view to the whole assembly.
I've been trying my best to get familiar with the Autodesk Inventor COM API for the purpose of integrating a new 3D input device (the Keyglove) for intuitive control. I have worked through the "My first plugin" example, and I have basic COM integration working using VB.NET in Visual Studio 2010. I've been able to rotate the camera's view around a single axis by applying a rotation matrix transform to the camera's UpVector property:
Dim Pi As Double = 3.14159265358979
Dim appInventor As Inventor.Application
Dim oCamera As Inventor.Camera
Dim oRotAxis As Inventor.Vector
Dim oRotMatrix As Inventor.Matrix
Dim oUpVector As Inventor.UnitVector
[code]....
But I cannot for the life of me figure out how to achieve what I'm really after: a programmatic equivalent to the "Orbit" action that is done on all three rotational axes at once. I would ultimately like to reproduce all aspects of the Full Navigation Wheel through the COM API, but right now I'll settle for 3D orbiting. The pan and zoom operations seem to be doable through the ComputeWithMouseInput() method, though I'd imagine there's a better, more direct way to do that with raw camera eye/target transformation as well.
When using the Orbit tool on the Full Navigation Wheel, the mouse X/Y axes control orientation about the Y and X axes respectively, centered around the pivot point. If you hold down shift to enable "roll" mode, the mouse Y axis is ignored, and the mouse X axis controls orientation about the Z axis. The Keyglove provides angular rotation data on all three axes at once, so there is no need to toggle between X/Y control and Z control; it should be easily possible to do them all at the same time. I can't figure out how though.
lacking in familiarity with the COM API and/or the ability to visualize and code the correct spatial geometry calculations.