My company is using inventor 2010. I have 64 bit edition. When I zoom in on a dwg or ipt it zooms for like 1mm then my screen goes gray. If i click the restore down button then restore back to max drawing comes back but as soon as i try to scroll zoom again with my bamboo pen the screen grays out again. I've already updated my video driver to latest version and i've updated my bamboo pen driver to latest version. I also booted windows 7 64 bit into safe mode and check device manager to make sure no broken drivers or anything like that. Some times it will work for a few min then start graying out my screen again.
I have a CAD 2013 Arch user who is having a strange issue with zooming in or out using the mouse scroll wheel. It doesn't happen all the time which frustrates me because I never see it, but she does. Every now and then when she's working in a drawing she'll try to zoom out slightly, but the it zooms WAY out, so much that the drawing looks like a tiny speck. When she tries to correct it by zooming in, it zooms WAY in. Then for some reason, it starts working fine. This seems to happen to her multiple times a day and I'm sure what to or how to troubleshoot this. She's using a wireless mouse from Logistic and seems to have the current drivers installed.
Running Adobe Photoshop CS3 Windows XP Pro Version 2002 Service Pack 3
When I check the "Zoom with Scroll Wheel" box in Preferences > General:
-using zoom tool, scroll wheel will zoom out to the smallest size, but will only zoom in until image is slightly larger than the file window then slides the image left and right or up and down depending on size of file window. When image is slightly larger than the file window, zoom out doesn't work anymore
-using Alt + Scroll does nothing
-Ctrl + Scroll zooms image the way Alt + Scroll should
When I UNcheck the "Zoom with Scroll Wheel" box in Preferences > General:
-using Alt + Scroll scroll wheel will zoom out to the smallest size, but will only zoom in until image is slightly larger than the file window then will neither zoom in or out anymore
-using Ctrl + Scroll slides the image left and right
In either preference setting, using ALT key causes letters for menus in the tool bar to be underlined
Is It possible to Zoom In/Out with Scroll Mouse In Lightroom, just like you can do that In Photoshop. Also, I noticed Inside the Library you can Zoom In and Out with the Zoom Slider In the Bottom of the page. But there Is no Zoom Slider Inside the Develop Mode, Why there Is no Zoom Slider Inside the Develop Mode ?
Since a few days I have a trial version of new CS6 and there I miss the possibility to zoom in / out with scroll function of mouse, where is it hidden ?
I just switched to a mac from PC and I was used to zoom with my mouse scroll and hold shift to zoom in even increments to keep the image as crisp as possible. Now on a mac I still haven't found a way to do this. When the zoom with mouse scroll is enabled (I use Apple's Magic Mouse), I'm only able to zoom in and out getting uneven values such as 88,7%, 97,6% etc - the same action as in Photoshop WITHOUT shift pressed. I've also tried plenty of different keys with mouse scroll zoom.
Is there any way to zoom in even steps with Magic Mouse on a mac? This is driving me crazy, as now I have to select the zoom tool and use it to zoom in and out, which significantly slows down my work flow.
While I most definitely love the addition of "alt-right-click-drag" for resizing the brush in CS6 Liquify , I must say I greatly feel the loss "alt-mouse-wheel" for zooming in and out.
(Alt-mouse-wheel is much better than ctrl-left-click zooming because you didn't have to go down to the zoom pop-up or ctrl-right-click to bring up the zoom dialog to go back to 100% or fit image.)
If it was brought back, then brush resizing and zooming in and out is all under the Alt key -
I have become very attached to having the mouse scroll wheel 'auto center the view at the cursor point' when I scroll in and out...I am not too happy with the new 'hold the wheel down and move the screen position' feature on x6. Can the old wheel configuration/centering be activated in x6?
-first, the new brushes flow slower than before- already at 3000-1700 pixels, 300 dpi. Which are modest measures when you paint seriously. I've some delay pulling a sign with most of my brushes. (Btw, i checked with care my brush dynamics). Some hints of what I should set to get a faster/natural flow ?
-second, the zoom wheel of my wacom tablet is broken with the update to xQuartz 271. 'Never had this problem before-damn, zooming ist important. I worked out some workaround using modifier keys (on the tablet), but its never ever so precise as with the wheel.
specs: XQuartz 271, Gimp 281, Wacom driver 526-3, Mac Os 106-6
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
I do have the box checked to scroll with mouse wheel. I am using vista and i have right clicked on photoshop and chosen to run as administrator. No new programs installed, except for a mouse driver. (Dynex) I have been using photoshop for ever on this laptop. I even tried to set the scroll wheel as a "keyboard shortcut"
i have no idea and i am completely stumped. I know i can hold down ctrl and use the mouse wheel to zoom, but that just feels awkward to me.
Is there any way to change the annoying reversed zoom/scroll wheel direction? It would be nice if the zoom/scrolling functioned like MDT....and autocentered with the crosshairs like MDT while zooming too....maybe I should give it up.
I would like to create a feed scroll. I know this can be done in solidworks (see link). But can this be done in inventor.
The Solid in the image wascreated as a rectangular pattern (1200-off) of a cylinder along a helix path that is then cut from the work piece. In essence this is exactly what im after but as you can see there are far too many surfaces and the resultant cut is jagged especially when viewed with the shaded with edges style not to mention its size the file size 11+ Mb and hence i cant attach it to this post.
HP z210 16Gb ATI FirePro5800 Autodesk Produst design Suite 2012
how to reverse the scroll wheel zoom feature so that it zoom in when you scroll forward and vice-versa? That way it will be the same as the default in AutoCad. I don't know why the changed them personally.
I've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.
This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?
When zooming in and out using the mouse wheel, the increments used in zooming are rather course.
I've tried changing the windows mouse options to no effect within Inventor. I've also looked around the application settings and could not readily find any options which adjusts zooming increment.
Is there even such an option, or am I out of luck on this one?
One of my users has been complaining that his "right click stops working". I have verified the problem myself, and find it very odd. It seems to be exclusive to his machine, which is a Windows XP 32 bit, I think with 4GB RAM and a decent gaming graphics card running IV 2012.
After he's been working about half of the day he suddenly is unable to right click and bring up his context menu. He then has to save his work and reboot his machine. After this he'll be good again for a few hours.
I asked him if he can bring up his context menu on other applications when IV's stops working. He didn't know but said he would try it the next time he has the problem.
Where can I change the default gap value in the initial display of the Broken View dialog box. I use a french version and the default value is set somewhere to .250 po instead of .250 in. I want to set this value correctly in my template.
I changed some feature on a sketch that was working and broke it. When I close the sketch a window shows the problems. A typical message is " Fillet1: Could not build this Fillet". The name "Fillet1" was automatically assigned. by Inventor. The questions is, how do I find Fillet1 in my sketch so I can fix it? I have looked in Parameters and that doesnt tell me.
When working inside an ipt, I want to open the idw from the browser using the right-click > "open drawing" option. The link is broken, however; so the idw must be searched for manually and opened. How can I repair the link so I can open the idw from the ipt browser in the future?
I am experincing an issue with display quality when using broken views in Inventor 2013 drawings.
After adding the break to any view in the drawing, part geometry and draft items in all views disappear/reappear upon zooming in and out on the drawing. The entities are still there (they can be highlited and selected), but they are not displayed.
If the view is deleted, or the break removed from the view, the problem goes away.
This seems to be related to the software because both myself and a co-worker are experiencing the same thing while using competely different hardware configurations.
I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
Just got updated from IV 2012 to 2013 with a new Dell (yawn) workstation to boot. OK, I did a section view of a pretty complex assembly and when I tried to take a measurement, the section view just dissapeared and it went back to full view. One of the primary uses of using section views is to view / inspect / measure, that which cannot be seen in the normal full view.
Why did this break in 2013 ? and is there a patch to fix it ?
Adding the second layer of weld in the dialog box, it is impossible to specify the weld size as the text areas don't show up when the symbol is added. The bottom weld symbol works fine though.
How to fix a broken link to an excel table in an idw file general table?I changed the folder name and heirarchy of the project.i expected the idw tables to find their parent excel files in the same folder with a new name, but they didn't.
I could find nothing for fixing broken excel links.
