how to reverse the scroll wheel zoom feature so that it zoom in when you scroll forward and vice-versa? That way it will be the same as the default in AutoCad. I don't know why the changed them personally.
View 3 RepliesIs there any way to change the annoying reversed zoom/scroll wheel direction? It would be nice if the zoom/scrolling functioned like MDT....and autocentered with the crosshairs like MDT while zooming too....maybe I should give it up.
View 7 Replies View RelatedI just re-installed Inventor 2014 on my computer.
Goto your Tools menu.
Select Application Options.
Click on the Display tab.
Under 3d Navigation section (very bottom), click the checkbox for Reverse Direction.
Windows 8.1 Pro 64-bit
Intel i7 870 @ 2.93 GHz
Nvidia GeForce 580 GTX 1536MB GDDR5
8 GB Ram
250GB HDD
I've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.
This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?
When zooming in and out using the mouse wheel, the increments used in zooming are rather course.
I've tried changing the windows mouse options to no effect within Inventor. I've also looked around the application settings and could not readily find any options which adjusts zooming increment.
Is there even such an option, or am I out of luck on this one?
I just got a new computer, with acad 2012 and now I can't get the scroll wheel to pan .
I use a Logitech MX 3200 mouse/keyboard set.
I have upgraded the Logitech Setpoint software, changed the scroll wheel to "middle button", set MBUTTONPAN=1 in CAD, and still no go -
If I press the wheel down and hold it ABSOLUTELY still I get the PAN-grip symbol but as soon as I move the mouse it disappears.
I have a Logitech MX Laser 1000 mouse, love the mouse. But the Middle scroll button does not pan when you hold down the wheel. And when you double click the wheel it no longer does a zoom extents. When you scroll the wheel it does zoom in and out. My mbuttonpan is set to 1. Not sure if I toggled something on or off.
View 3 Replies View RelatedWe have an older engineering in our office who is constantly double clicking his scroll wheel by accident and doing a zoom extents on his layout. He's running LT 2005. I don't see where I can change it. Its not part of the mouse button customization.
View 8 Replies View RelatedI have a CAD 2013 Arch user who is having a strange issue with zooming in or out using the mouse scroll wheel. It doesn't happen all the time which frustrates me because I never see it, but she does. Every now and then when she's working in a drawing she'll try to zoom out slightly, but the it zooms WAY out, so much that the drawing looks like a tiny speck. When she tries to correct it by zooming in, it zooms WAY in. Then for some reason, it starts working fine. This seems to happen to her multiple times a day and I'm sure what to or how to troubleshoot this. She's using a wireless mouse from Logistic and seems to have the current drivers installed.
View 1 Replies View RelatedI just purchased a new Lenonvo Thinkpad w520 and bluetooth laser mouse and am running auotcad 2012. I can not seem to get the scroll wheel to zoom in/out. A regular corded USB mouse works fine..tried scrollwheel setting, mouse is set to middle button....? Lenovo says it is an application issue
View 3 Replies View RelatedAfter an update to Photoshop 13.1.6 x64, the scroll wheel on my mouse quit working as a zoom tool.
View 1 Replies View RelatedI've tried everything I can to adjust my mouse's scroll wheel to pan as opposed to zoom and I just can't seem to get it.Is that an option they got rid of?
View 9 Replies View RelatedIs it possible to adjust the behavior of Corel Draw X5 in order to have the scroll wheel of the mouse behave like the scrolling action on a web browser. I would like a vertical scroll to vertically scroll the design when I am zoomed in and some of the design continues beyond the current view. Also, I have a mouse that can scroll horizontally when the scroll wheel is nudged from side to side, so I would like to have a horizontal scroll as well, if possible.
View 1 Replies View RelatedWhile I most definitely love the addition of "alt-right-click-drag" for resizing the brush in CS6 Liquify , I must say I greatly feel the loss "alt-mouse-wheel" for zooming in and out.
(Alt-mouse-wheel is much better than ctrl-left-click zooming because you didn't have to go down to the zoom pop-up or ctrl-right-click to bring up the zoom dialog to go back to 100% or fit image.)
If it was brought back, then brush resizing and zooming in and out is all under the Alt key -
setup PS so that the scroll wheel on your mouse changes the brush size? I use Aperture and this functionality is built in and I find it tremendously useful. When I export an image to PS I find it really annoying to have to reach up to the brackets to make that adjustment.
View 2 Replies View RelatedIt was all told in the heading already: Is possible to Scroll Layers palette usning mouse wheel?
View 2 Replies View RelatedThere are other discussions about scroll wheel zooming, but this is about scrolling. It goes too quickly in InDesign, though it's great in other products.
Is there a way to adjust it in InDesign 6?
My scroll wheel no longer works after installing Lightroom 4.4. In all previous versions, I was able to use my Logitech scroll device to adjust the sliders in the development panel. In the 4.4 version, the scroll wheel no longer works and instead of adjusting an individual slider, it scrolls the whole development panel up and down. I did uninstall the mouse driver and reinstalled but that did not work. The mouse works just fine in all other programs. I think it is a bug with the 4.4 version. I am operating in Windows 7.
View 2 Replies View RelatedIs there a way I can move the playhead with my mouse scroll wheel?
I can scroll horizontally through my timeline, but that is not what I need.
I want to move the playhead every scroll-'click' by 15 frames for example.
Pinnacle Studio had that feature, worked really fast.
I used to have x4 . One of the features I like is wherever you place the cursor and use your the scroll wheel on the mouse, it will zoom in where the cursor is.
When i switched to x5 , it doesnt center to the cursor. Is that a glitch? is there a way im doing it wrong or any setting i need to fix?
If I use the scroll wheel on my mouse in X3 it changes the zoom and does not scroll.
Using the same in X5 works OK and scrolls.
How I can change a setting somewhere so that it scrolls in X3
I've installed Illustrator CS6 recently and found the behavior of panning with the scroll wheel annoying. When I have low zoom values (e.g. 75%) the scroll wheel lets me pan U-D, L-R at normal speed, but if I zoom in (200% and up), the panning slows to a point where it is unusable at 600% and up. I use [Shift] to speed it up but at high zoom levels it's not enough. This wasn't the case for Illustrator CS5 or 5.5 where panning with the scroll wheel worked at the same speed at any zoom level.
View 1 Replies View RelatedI want to animate this cog wheel so that it rotate, how do I do?
View 2 Replies View RelatedWe create a greate deal of DLL add ins for Inventor using Microsoft VB.NET. The code security is very important to us. I hear certain program such " Lutz Roeder's Reflector " can reverse engineer the DLL assemblies and get the actual code from it. This would cause concern when we deploy the DLL to various users.
So, is it true that DLL from VB.NET (or C# and C++) is so vulnerable from reverse engineering? if yes, what is any practice to add security to it?
I'm trying to figure out an animation in an assembly
I'm trying to go:
______/~~~~~~~~~~~\_______
with a low height, lifting it up at a defined slope, and running it to the slope going down
I know how to drive constraint, is there a drive sweep I could do?
My company is using inventor 2010. I have 64 bit edition. When I zoom in on a dwg or ipt it zooms for like 1mm then my screen goes gray. If i click the restore down button then restore back to max drawing comes back but as soon as i try to scroll zoom again with my bamboo pen the screen grays out again. I've already updated my video driver to latest version and i've updated my bamboo pen driver to latest version. I also booted windows 7 64 bit into safe mode and check device manager to make sure no broken drivers or anything like that. Some times it will work for a few min then start graying out my screen again.
View 7 Replies View RelatedI would like to create a feed scroll. I know this can be done in solidworks (see link). But can this be done in inventor.
The Solid in the image wascreated as a rectangular pattern (1200-off) of a cylinder along a helix path that is then cut from the work piece. In essence this is exactly what im after but as you can see there are far too many surfaces and the resultant cut is jagged especially when viewed with the shaded with edges style not to mention its size the file size 11+ Mb and hence i cant attach it to this post.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
I am trying to create multiple bodies within a part file using multiple ifeatures. It seems that it is not possible to force the ifeature to create a new body when it is inserted. If it is inserted into a part that has multiple bodies present.
I call it "Reverse Nesting". We have a sheet of a certain size (18" x 32" in this case). I need to completely cover a much larger (and oddly shapped) panel with these sheets. I want to cnc cut these sheets into the correct shape and be able to assemble them together on the larger panel.
Create an ifeature that creates a sheet of the correct size. In a part file with a sketch (or surface) of the panel we need to cover, we can insert the ifeature and constrain its sketch to the original sketch. My hope was that I would be able to do this multiple times (each as its own body),orient them as req'd to cover the panel, and the use the original panel sketch to do an interference extrude through all the bodies. I could then use Make Componets to create an assembly of all of the parts, and generate flat profiles for each piece for CNC cutting. This doesn't work because I can't geerate multiple bodies with multiple iFeatures in the same file.Create a template part that is teh size of the sheet and constrain them together on the panel I want to cover. Use assembly features to cut way what I do not need. This does not work because there are performance and associativity issues with assembly features and no way to push the cuts back to the parts for CNC profiles.
Similar to #2 except derive the panel we need to cover into our part and use split to remove what we do not want from our sheet. This does not work because it is not easy to move a derive around within a part and link it to the other sheets that are adjacent to it.Create a template that contains parameters that contain the sizes of the sheet. Manually create sketchs and constrain them to each other on the derived (as a surface) panel, extrude each one as a separate body and then run Make components. This will work, but it is very time consuming.
Is there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.
View 6 Replies View RelatedI'm trying to apply the right constraint in stress analysis environment.
How would I apply the right constraint? And to which face of the wheel or axle should I apply the constraint to get right results.
If I'm applying the sliding connection to the face of the wheel in z direction, the model will stop stress analysis with an error of "not enough constraints"
if I apply the sliding constraint to the inside of the wheel on the surface of the circle, I get the result as attached. I get 0 reaction in the Z direction which is wrong and should be zero reaction in x direction. How do I get it right?
The correct way to me would be a constraint that would only take forces in the -Y direction, same direction as gravity.
The wheel should not have any other reaction than in the Y direction. Hoe do I define that constraint? In my model the wheel are free to rotate on the axle.
I'm attaching both the general arrangement and the reaction report.
I am trying to create a wheel that can be rotate about the horizontal axis. It should have a hole for axle to fit through. However, when I try to do this it will not let me select the horizontal axis to rotate about. I also tried to rotate about a center line that I created but it wouldn't do that either..
Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram