I would like to create a feed scroll. I know this can be done in solidworks (see link). But can this be done in inventor.
The Solid in the image wascreated as a rectangular pattern (1200-off) of a cylinder along a helix path that is then cut from the work piece. In essence this is exactly what im after but as you can see there are far too many surfaces and the resultant cut is jagged especially when viewed with the shaded with edges style not to mention its size the file size 11+ Mb and hence i cant attach it to this post.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
I recently installed AutoCAD 2014.When I open it a Design Feed palette comes up. (see attached image)I would like to disable this feature and not have the palette come up.
I am nearly done with my site and realized I forgot to insert a scroll box like I put on my other site via HTML. I haven't found a "form" widget that will allow me to insert a scroll box that I can then input text into for readers to, well, scroll through!
I am using Xara Web Designer 6 - love it by the way, but would like to know how to insert a scroll box for my Testimonials page, as stated above. My browser is FFox.
I know is has to be something simple but I can't find it. Have perused the forum and didn't find precisely what I was looking for. I did read a couple of posts about iframes but I understood those to be utilized for opening other sites within your site.
My company is using inventor 2010. I have 64 bit edition. When I zoom in on a dwg or ipt it zooms for like 1mm then my screen goes gray. If i click the restore down button then restore back to max drawing comes back but as soon as i try to scroll zoom again with my bamboo pen the screen grays out again. I've already updated my video driver to latest version and i've updated my bamboo pen driver to latest version. I also booted windows 7 64 bit into safe mode and check device manager to make sure no broken drivers or anything like that. Some times it will work for a few min then start graying out my screen again.
Is there any way to change the annoying reversed zoom/scroll wheel direction? It would be nice if the zoom/scrolling functioned like MDT....and autocentered with the crosshairs like MDT while zooming too....maybe I should give it up.
how to reverse the scroll wheel zoom feature so that it zoom in when you scroll forward and vice-versa? That way it will be the same as the default in AutoCad. I don't know why the changed them personally.
I've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.
This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?
When zooming in and out using the mouse wheel, the increments used in zooming are rather course.
I've tried changing the windows mouse options to no effect within Inventor. I've also looked around the application settings and could not readily find any options which adjusts zooming increment.
Is there even such an option, or am I out of luck on this one?
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
I created an an app that uses a paletteset, and displays an usercontrol in it. I want to add a scroll to the paletteset. As when I resize it for editing the dwg file, The paletteset data below cannot be viewed without a scrol bar. get the scroll bar.
Autodesk.AutoCAD.Windows.PaletteSet m_ps = new Autodesk.AutoCAD.Windows.PaletteSet("Object Data");UC uControl = new UC();m_ps.Add("Object Data", uControl ); m_ps.Visible = true; paletteset properties does have any properties related to scrollbar.
The vertical scroll bar don't really bother me, it's the bottom scroll bar that I mostly want to hide. I never use them and the horizontal one take too much space that hide some "tabs". I know I can "minimize" the horizontal one, but I have to do it every single time I start AutoCAD. So I've search a way to hide them but come with nothing.
I have a request for a project to put in a scroll-type border around a map however I can not find anything in autocad that would work as a viewport border or linetype. I could possibly could use a graphic and scale around the layout but my choices are limited .
I am using AutoCad 2012 and have just gotten a new screen and Logitech mouse. I can't get the scroll wheel to pan for me. When I press the scroll wheel I see a zoom button on the screen instead of a pan symbol.
in edit dialog box i can scroll up and down through block list & even get a view for the blocks as i go but not any more information or properties
SO MY QUESTION IS THERE IS A WAY THAT I CAN GET INFO ON THE BLOCKS AS I GO THROUGH THE BLOCK LIST. INFO SUCH AS LAYERS NAMES OF THE OBJECT CONTAINED IN THE BLOCK SO I WON'T NEED TO OPEN EACH BLOCK SO I CAN GET SUCH INFO WHICH TAKES A LOT OF TIME ???
I have this problem with AutoCAD 2012 and with LT2011. When first opening a drawing in a layout with the viewport locked and activated, the first scroll action moves the drawing within the viewport. After the first scroll, any scrolling moves the entire viewport as it should when locked. Putting the drawing back to where it was within the viewport requires unlocking the viewport or undoing everything back to the first scroll action. This is very anoying especially if you are zoomed in and can't see the edges of the viewport and don't notice the move right away. I did not have this problem in the older versions.
I just installed Autocad 2010 student, and now my microsoft wireless mouse 4000 will not pan when I press the scroll button. I have read a few older post that talk about Mbuttons but I can't find how to change my Mbutton from 0 to 1 or whatever it is supposed to be.
m_ps As Autodesk.AutoCAD.Windows.PaletteSet = Nothing If m_ps Is Nothing Then m_ps = New Autodesk.AutoCAD.Windows.PaletteSet("Test") Dim myPalette As EPSSN = New Test() m_ps.Add("Test", myPalette) m_ps.Size = New Drawing.Size(354, 591) m_ps.Visible = True end if
In my tool palette is have some controls. In some systems entire palette is visible completely, but in some systems, the bottom controls in the palette are not visible where the system settings are different. Is there any option to display scroll bar in the tool palette automatically?
I have a Logitech MX Laser 1000 mouse, love the mouse. But the Middle scroll button does not pan when you hold down the wheel. And when you double click the wheel it no longer does a zoom extents. When you scroll the wheel it does zoom in and out. My mbuttonpan is set to 1. Not sure if I toggled something on or off.
Is there anyways to change the scroll direction on the trackpad of Mac 2013 Autocad? I like Autocad but I don't like how it uses the "natural" scrolling even with it turned off in OS X. It is just weird having your OS work one way but Autocad work the opposite.
I am attaching a scroll work for doors that I am trying to draw. But I am having problem on the smoothness of the curves that I am trying to make. What I do is I draw a series of arcs to replicate the reference image also attached in this message. Also, when I print this into PDF, what happens is that the lines break where the arcs intersect in CAD, also attached here.
I am using 2012 version of CAD. I usually use classic mode. My files consist of alot of xrefs which are saved in different CAD versions. Whenever I scroll on my drawings i get a fatal error. I am not sure why this happens. Everytime a fatal error appears I have recover all the xrefs and the drawings those are opened in my system. Also, If i open the file directly from folder it gives me fatal error. so i have open CAD window first and then i have to open my drawings.
We have an older engineering in our office who is constantly double clicking his scroll wheel by accident and doing a zoom extents on his layout. He's running LT 2005. I don't see where I can change it. Its not part of the mouse button customization.
I have a CAD 2013 Arch user who is having a strange issue with zooming in or out using the mouse scroll wheel. It doesn't happen all the time which frustrates me because I never see it, but she does. Every now and then when she's working in a drawing she'll try to zoom out slightly, but the it zooms WAY out, so much that the drawing looks like a tiny speck. When she tries to correct it by zooming in, it zooms WAY in. Then for some reason, it starts working fine. This seems to happen to her multiple times a day and I'm sure what to or how to troubleshoot this. She's using a wireless mouse from Logistic and seems to have the current drivers installed.
i have problem with my cad. When i push in scroll button in old settings i saw hand (pan function) and it was easy to move. Now when i push in scroll button i see cross with arrows and moving where i want is difficult. How can i change it (i want use pan function when i push in scroll).
Why is it that when I click in the command line history field (when docked) and roll the mouse wheel I can't scroll it up or down? There is no visible scroll bar until the cursor is moved to the other side of the window (a long way on the 30" display), and grabbing this will scroll the command history, yet the wheel wont work.
If the command line is undocked and the disclosure triangle is clicked to display the history, the scroll wheel DOES scroll the list.
i have problem with pan function, it doesn't work on scroll button, i have windows 7 (64 bit), microsoft wireless mobile mouse 4000 and autocad 2011, i have downloaded new software for mouse and changed wheel button to middle click and i have changed mbuttonpan to 1 in autocad, still not working.
It happens during many different commands. The command itself doesn't seem to affect this problem. It doesn't always happen, but every so often, as I'm in the middle of a command, when I scroll past a contour line the program freezes. Sometimes it comes back to life after a few seconds of thinking, but sometimes it just sits there non-responsive forever.
Possible ideas:
-Contour Labels set to "Mask Contour Line Only"
-Dynamic Inputs on
-Selection Preview is on (but it's disabled for "When a command is active")
-Surface is shortcutted into the drawing
-Contours are from an XREF
Civil 3D 2013 64-bit HP Desktop - HP Z420 Intel Xeon CPU E5-1620 0 @ 3.60 GHz 24GB RAM AMD Radeon HD 6570 Windows 7 SP1