I have this problem with AutoCAD 2012 and with LT2011. When first opening a drawing in a layout with the viewport locked and activated, the first scroll action moves the drawing within the viewport. After the first scroll, any scrolling moves the entire viewport as it should when locked. Putting the drawing back to where it was within the viewport requires unlocking the viewport or undoing everything back to the first scroll action. This is very anoying especially if you are zoomed in and can't see the edges of the viewport and don't notice the move right away. I did not have this problem in the older versions.
1. Any way to pan within a locked viewport? Everything I've tried has led me to believe that this is not possible.
2. Is it possible to limit a viewport's scale to one specific value? In my case I need all of my viewports, on multiple sheets, to show my model space in 1:100. That said I don't want to be able to zoom in this viewport, just a straight up "pan-only" space--hence my first question.
Edit#1: So to further explain my situation, this particular drawing set that I'm putting together is only used to focus and display what is in my modelspace --nothing more. It seems as though I'll need to continue unlocking, panning, zooming, scaling, and re-locking my work for now.
In the end the final goal was to send this drawing template to a client to allow them to adjust what areas of the drawing the wanted to display without them needing to play with the scale.
My locked viewport floats horizontally, all of the time. It does it on all my drawings. Is there a fix for this phenomenon? Is AutoCAD planning on fixing this?
A problem we are having in our office on 1 computer is that this message appears in the command line
'viewport is view locked switching to paper space'
It happens whenever we zoom or pan into one of our locked viewports. We have purposefully locked the viewport so we don't lose the scale when we zoom or pan and want to leave it this way, however, whenever we zoom or pan this message appears and it takes 30 seconds before the screen readjusts to the zoom or pan we require.
I have had this issue for about two weeks. I am not aware of any changes to my system though Windows 7 updates automatically.
Often, but not all the time, when I am in a floating viewport which is locked and I zoom in, the part of the drawing disappears as if the view on the viewport has adjusted to one side so that I cannot see any of what I am working on. If I escape the command and 'undo' last command it takes me back to the correct view but in paperspace.
This is a pain as I cannot zoom in to locate a point accurately. It only happens when I zoom in quite close. The viewports are locked and it is only a problem recently. I have used CAD for 20 years and LT 2008 for the last 4-5 years so I dont think it is a user issue. Maybe a settings issue or bug, but I have not knowingly changed any settings which would do this and cannot see why this would be a 'feature'.
I'm in paper space, in a drawing I didn't create and, when I dbl. click in a viewport to open it and attempt a zoom, the entire paper space environment zooms, as if I was still in paper space, although the task bar tells me I'm in model space. Is this because the viewport is locked? If so, how do I unlock. I see nothing on screen regarding padlocks, except the tool bar/ window positions padlock.
If it makes a difference, I'm in Acad 2006, not 2006 T.
I just installed Autocad 2010 student, and now my microsoft wireless mouse 4000 will not pan when I press the scroll button. I have read a few older post that talk about Mbuttons but I can't find how to change my Mbutton from 0 to 1 or whatever it is supposed to be.
I have a Logitech MX Laser 1000 mouse, love the mouse. But the Middle scroll button does not pan when you hold down the wheel. And when you double click the wheel it no longer does a zoom extents. When you scroll the wheel it does zoom in and out. My mbuttonpan is set to 1. Not sure if I toggled something on or off.
I am using 2012 version of CAD. I usually use classic mode. My files consist of alot of xrefs which are saved in different CAD versions. Whenever I scroll on my drawings i get a fatal error. I am not sure why this happens. Everytime a fatal error appears I have recover all the xrefs and the drawings those are opened in my system. Also, If i open the file directly from folder it gives me fatal error. so i have open CAD window first and then i have to open my drawings.
i have problem with my cad. When i push in scroll button in old settings i saw hand (pan function) and it was easy to move. Now when i push in scroll button i see cross with arrows and moving where i want is difficult. How can i change it (i want use pan function when i push in scroll).
i have problem with pan function, it doesn't work on scroll button, i have windows 7 (64 bit), microsoft wireless mobile mouse 4000 and autocad 2011, i have downloaded new software for mouse and changed wheel button to middle click and i have changed mbuttonpan to 1 in autocad, still not working.
I just purchased a new Lenonvo Thinkpad w520 and bluetooth laser mouse and am running auotcad 2012. I can not seem to get the scroll wheel to zoom in/out. A regular corded USB mouse works fine..tried scrollwheel setting, mouse is set to middle button....? Lenovo says it is an application issue
Working in AutoCAD 2011. Unable to modify text once the text box is closed. I can only erase and re-write once closed. Bummer! When I re-select and double click on text, neither the box that typicallly encloses the text nor the "drop down box" w/ the various modifications that can be made appears. This includes new text just written since re-opening the file and existing text that was entered in previous sessions. I don't see anything that indicates that the text is "locked" or otherwise restricted from modification.
I am trying to draw dimension leader arrows. I start "_LE QLEADER" and go to settings and tell it I want my arrowhead to be "closed filled". I draw the arrow, and it comes up as a "DOT" arrow.
I can change this in the Properties, but who wants to do that every time? When I go back to "_LE QLEADER" and go to settings, the arrow block is set back to DOT, even though I just changed it to "closed filled".
I used "rename" to rename my "closed filled" block to "dsfsdfsdf", in case the block got redefined somehow.My dimblk is set to "", as are dimblk1 and dimblk2. Tried both setting of dimsah as well.
I do not see any "CExxxxxx" variable which might control this.
I have made gridlines and put them on a locked layer. I want to be able to see them and snap to them, but I don't want to select them. Their selectability is hindering my ability to select objects on other layers. Is there any way to make lines on locked layers not selectable? (I don't like the Autocad standard grid.)
My colleague made some drawings using AutoCAD 2011. Somehow the sheet status in Sheet Set Manager says all the drawings are locked for editing - it was unintentional. The drawings can be fully viewed only from the computer, which created the drawings. In other computers, we can only see the text. The model view and the bottom of the drawing which contains drawing number and other info do not show.
We need to deliver our drawings to the customer so they can see the coordinates in the maps/drawings.
How could we change the status or unlock it so the customer can view the entire drawings? If possible, we still want the drawings unable to be edited.
In our computer, we have AutoDesk Vault - did it somehow kicked in automatically?
how to adjust the transparency of locked layers? Also when I isolate a layer the other layers appear semi transparent, is it the same setting to adjust this transparancy as well?
When I try to move an object to the 0,0 plain, I get a "locked" symbol in the command line and the object does not move to the 0,0 plain. How would I be able to unlock this to move anything to the 0,0 plain.
Is there any way to edit (remove) the "Lock position" mode of a visible attribute in a block once the block has been created? This characteristic does not show up in BATTMAN for editing.
this in an issue ive noticed for a long time now across a few versions of ACAD, not sure whats causing it. When i try to draw an XLINE sometimes the command will get locked into either horizontal or vertical mode, without me choosing that option. seems to based on the OSNAP pickpoint i grab maybe.
attached are pics of the process.
i run XLINE, pick endpoint and bam, its locked into horizontal mode, very annoying if im trying to make a vertical and horizontal line based off the same point.
i have in model one drawing, in layout i have 4 viewports, each have different scale, now.. how can i using same model and 1 layout to determine scale of dimentions per each viewport? or all viewports in same layout have same scale of dimention?
I have a problem with one specific drawing where I have created a right viewport; however, if I double click in the port to enter model space, the viewport automatically changes to a top view. If the viewport is locked, no change to the view. This problem only exhibits itself in one drawing so it must be some setting that is drawing specific.
We have recently been upgraded to Autodesk Map 3D where I work which when we first got it was a big improvement from what we were running. When I first started using the programme I found the lovely little box in the bottom right hand corner where you can change the view scale.
This allowed me, when in paper space, to double click in a viewport then click the drop down arrow next to the Viewscale box, select custom and then type in the scale I wanted (i.e. if 1:200 I typed 200 then hit ok).
However all of a sudden I am no longer able to do this. When I press ok, nothing changes. There are no error messages or any message. It appears to disregard the command. There is also a closed padlock next to this which when hovered over gives the discription "click to link/unlink AutoCAD Map 3D stylisation while zooming". I am unable to unlock this by clicking on it, the padlock seems protected almost so I am wondering if this is my problem?
In paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
I'm working on a new computer and some of the ACAD settings are different.. When I am in paperspace, I am used to just double-clicking in a viewport to work in modelspace..
Whether the viewport is locked or not, I am used to being able to zoom in and out to scale, or just work there and the viewport stays stationary.
There is some setting that is causing the viewport to "zoom out" every time I double click in the viewport. I have to then lock it which means that I can't change the zoom-to-scale factor.. It's also a pain in the neck.
Also, when I have multiple viewports open that are not locked, they all "zoom out" also when I double-click in one..
I have a master drawing with multiple xrefed building sketches. Looking at the model space on the "master" I can see all the room identities. However, if I go to the sheets that I have created and look at the view ports. The room identities are not there. The layer is called A-Room-Iden and it is on and not frozen...
I have a drawing which has 3 viewports in it, two of the viewports are ok but with the third one when i try to have a leader from it to a text box outside the viewport in paperspace, the section of the leader within the viewport is blanked out,. I have tried bringing the leader to the front and sending the viewport to the back along with regenning the drawing to no avail. the leader works ok with the other two viewports no issue there but with the third one it just will not work. The viewport is used for viewing a location using a raster map image and it does show the leader / line object when zoomed out and disappears again when the line goes over the raster image.
