Normally when a layer is locked, you hover your cursor over the locked layer on screen you will be able to see a small [Lock Pad]
kinda icon ...
{ Please refer to the attach image for explanation ... }
1. I try to use any auto correction such as tone, and nothing appears to change
2. I see the small layers 'background' icon flashing as I do this into the black and white check pattern
3. It seems that the layer background is partially locked- (when I scroll my mouse over the 'lock' icon this is written)
Yet there is no icon above in 'lock' that is highlighted. So I cannot unlock it.I am able to adjust in all other methods which are not auto corrections. Perhaps I changed some settings accidentally?
The AutoCAD deadline-sensor is working well this week as this Project near completion.
The closer we get to the deadline, the more AutoCAD slows down.
My UCS Icon has disappeared from Modelspace.
It's were it belongs in Paperspace.
The USC Icon is set to "Noorigin" and the color is set to RED for Modelspace.
I need it to orient the many angled spaces we have in this Plan.
I've locked a layer and this one went off, too. This is AutoCAD 2010, it's because the program?
I want my layer ON but locked, what can I do?
I've always used the screen display modes in the toolbox in prior versions. They are gone from the toolbox, can someone tell me where to access them? I want to have multiple files open where I can see them and work from them.
View 3 Replies View RelatedI've been working with a firm for 6 weeks now, and had no major AutoCAD problems for the first 5 weeks. We're running AutoCAD 2010 on my machine, and it crashes quite often when I close drawings, which is quite annoying. But last week after opening a series of drawings to print some stuff for the boss, and CAD crashing after every 1 or 2 prints, I got the message:
A display driver file (.hdi) is missing or has been corrupted. The program will be closed.
This problem may be caused by missing .hdi files in the following location:
C:program filesAutoCAD Architecture 2012drv
I ran a repair, then did a reinstall, and when neither of those worked I just uninstalled and reinstalled the whole program. I still got the error message, but I had opened AutoCAD Architecture and was using that instead for a bit and saw Autodesk do an update in the background. So I booted up AutoCAD 2010 and it was working again so I guess it fixed the problem. I used it for a few more days then yesterday I had to open and print another series of drawings for the boss and it crashed again after every one, as usual, and when I sat back down and tried to open up a drawing to work on it I got the same error message again. Frustrated and angry, I switched over to AutoCAD Architecture and imported my Classic setting and used that for the next day. But this morning I had to open and print 3 more drawings for the boss and Architecture crashed after every one, then it started giving me the same error that regular AutoCAD has been giving me about the missing .hdi file. I copied the drv folder from a co-worker's computer and replaced mine with the working one, but neither version of AutoCAD is working again.
So I ask, what do I do now? I can't keep uninstalling and reinstalling AutoCAD every week because of these crashes and missing .hdi files. I need a real fix, something to fix the constant crashes and missing files. Sometimes I have to open multiple drawings to pull blocks or whatever from an older drawing, and I can't risk CAD crashing after I close these drawings and me possibly losing some work on the file I am actually working on at the time. this is making me way less productive at work spending all this time trying to get AutoCAD to work.
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies View RelatedI must have changed a setting and now I cannot figure out what I did.
On AutoCad at school, when drawing a line, there is a light blue dialogue box that would pop up above the cursor telling you the length of the line before you set it. (not the coordinates).
This is not showing up on the educational version of AutoCad I am running at home.
I am a new user of AutoCad 2010 and am trying to access what used to be the detail component manager, but now I understand would be accessed through the Style and Display panel under the manage tab.
The problem is, I have no Style and Display panel
I have attached a screen shot showing the manage tab open and the CUI open showing the panel options expanded - which do not include the style and display panel- only the four panels currently installed under the Manage tab.
I've really hit a dead end and don't know where to look for the style and display panel so I can ultimately access the structural catalog.
Is there a way to "disable" the display of the viewport "outline" so that it is not seen when looking at the paper space tab on a computer screen? Kind of like how images have frames but you can "hide" them.
View 4 Replies View RelatedI have a question on the display of the layers in the layer-pulldown. I have a client that is having problems with the display of his layers in the pull-down. They are not in alpha order. When he opened the dialog box they are listed correctly - what can cause this?
View 4 Replies View RelatedIt happens when you turn on layer manager to adjust each layer settings such as name, line type or color and etc.
Problem is that each layer row disappears and each time it happens, only solution I know is to restart the computer. See the attached image.
I Have several PC's with 2011..On some machines the layer transparency is not working anymore on screen.90% transparency red is normally light pink but on some machines with the same drawing and the same settings it is 100% full red.A few day's ago there was no problem on those pc's
View 4 Replies View RelatedI only have one layer in the document - it is not locked. I have already tried locking it, unlocking it, creating new layers, locking/unlocking those.I am not able to access Object>Unlock All.
I have done Hide All Layers/Show All Layers - so there is nothing hidden..I have even opened a previous project, and it has the same symbol on it and none of these methods of correcting it works either. It printed fine on Friday.
When I create an entirely new document, the icon is still there.
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedThis morning I somehow changed the way the command icons are displayed, so how can I restore the command icons back to the default display. I've tried to figure out where the setting is for the way the icons are displayed, but I haven't been able to reset it back to the default setting.
Here's what the display got changed to, that I want to change back to the default setting.
Is there a way to display large icon without text in the ribbon in autocad 2011? or this feature is only available in 2012 and up.
Is there a workaround to display large button icon without text in 2011?
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View RelatedI isolated layers to clear out a drawing, since then I have had nothing but hassle with locked layers, No matter how many times I unlock them, they lock up again, if I create a new layer it comes in locked, if I change a line to a differant layer it locks up, I have tried creating a few simple layers, then copying and pasting the layout into a new drg file, still the problem exists, it is costing me a lot of time having to keep doing this.
View 9 Replies View RelatedI loaded 2013 Civil 3D and I customized my Ribbon with Zoom Commands I use frequently; everything looked fine...I changed the Workspace to Planning & Analysis and cutomized my Ribbon to include the Zoom Commands but a Button Icon for ZOOM_TO_POINT came up with a cloud & question mark. I went to look for the Icon Image & I don't see it. I made the mistake of changing the Icon to another hoping I could change it back but it's not there. I went to the 2012 verison & the Button Icon is there...first icon listed. Where are the icons in 2012 so I can drag & drop image into 2013?
The icon has a point symbol with a magnifying glass. I've checked other computers and the same thing. Can't find the Image Icon for ZOOM_TO_POINT. It shows up when you load the software but if you want to edit it...it's not there in the CUI Button Icons.
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
Just installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
View 2 Replies View RelatedI am trying to assign objects (only in UNLOCKED layers) with a new layer.So basically, the user will select all the objects in the drawing.
After selecting (ex. press enter after window selecting), only objects in UNLOCKED layers will have a new layer.
Following is the code I am using...But I keep getting eOnLockedLayer exception.How should I handle this issue?
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
PromptSelectionOptions pSelOpts = new PromptSelectionOptions();
pSelOpts.MessageForAdding = "Select all objects";
PromptSelectionResult pSelRes = acDoc.Editor.GetSelection(pSelOpts);
if (pSelRes.Status == PromptStatus.OK)
[code]....
I'm messing around with some commands and I'm currently exploring laylockfadectl/layiso.
They both work just fine of course, but I was wondering if its possible to make ACAD ignore snap points on the locked layers?
My ACad2006 Layer Combo Control bar appears to be locked. It will only show the current layer and will not show the layer of an object that is selected with the pickbox. I must have accidentally made a change somehow, but don't know how to undo this.
View 2 Replies View RelatedI am running GIMP 2.6.10 under Ubuntu Maverick...and latelyhave been having an intermittent problem with the fileselector.
It pops up seemingly locked-up so I can't change directoriesor disks, matter of fact can't do anything but close it.
I got a shape locked on the screen and can't unlock it.It is just a rectangle with 2 rounded corners. It has a strange shadow... I don't recall doing that shape ever, I was switching among Illustrator and Photoshop and in a second it just appeared.I tried many alternatives but still can't get rid off it. It is in every new file I make. It doesn't respond to zoom in/out. If I switch to outline view it stays the same, even with the shadow.I recorded a video.
View 12 Replies View Relatedi'm experiencing some problems with the vieport in max 2012.sometimes when i restart max all my geometries in viewport are missing, while all are still there.
View 1 Replies View Relatedthis is how i usually duplicate a layer, by dragging and dropping to the new layer icon at the bottom of the palette. it is not letting me do that.
also, when i select a a single, or group of layers and move them around in the palette, i thought it used.
I have a question regarding AutoCAD 2012 and when it comes to locking layers.
When working on the basement layer I would like to see that layer locked in turn not affecting my other layers, ie: my house/garage/second-floor.
I'm working in 2011. Just labeling some contours in a new drawing, using the 'Multiple' setting. I found I could only draw one tangent of Contour Label Line. If I continued, I could click but no labels were created and on finishing the command I could see that those clicks had been ignored. What gives?
I found that the labels were on the current layer, instead of the layer they're meant to use.I also realised that my current layer was locked (from the previous task).
if the current layer is locked, the contour labels ignore the layer setting that they are meant to use, and come in on the current layer instead. And you can only draw one tangent's worth of contour labels at a time before finishing the command and restarting.
Solution: make a different layer current or unlock your layer.
are contour labels generally created on the current layer and then moved to their proper layer?Is that why it hit a snag: it wasn't permitted to move the object to a different layer because the one it was on was locked?