I have a drawing which has 3 viewports in it, two of the viewports are ok but with the third one when i try to have a leader from it to a text box outside the viewport in paperspace, the section of the leader within the viewport is blanked out,. I have tried bringing the leader to the front and sending the viewport to the back along with regenning the drawing to no avail. the leader works ok with the other two viewports no issue there but with the third one it just will not work. The viewport is used for viewing a location using a raster map image and it does show the leader / line object when zoomed out and disappears again when the line goes over the raster image.
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
In previous versions of Max, visibility was “scrubable” on the timeline. You could see the object as a ghost and gradually appearing, fully opaque. I can’t seem to get it to work in Max2012.
I have turned off or unchecked "Extend leader to text" (Multileader Style > Modify > Content > Extend leader to text) in all my templates.
Yet, when I start a new drawing using those templates, that feature is turned on (checked) again.
I've tested this several times. Yes, I'm using the same templates I've been saving. I've even created a new template from scratch with none of our standards in it. The check for Extend leader to text keeps returning.
I am currently using AutoCAD 2011LT. When I add a leader sometimes the text appears fine and sometime the text appear to go bold, I tried retyping the text but it appears to be luck of the draw as to when it happens. I don't have a problem with this showing up on the screen but it transfer to prints on both paper and PDF.
I am trying to draw dimension leader arrows. I start "_LE QLEADER" and go to settings and tell it I want my arrowhead to be "closed filled". I draw the arrow, and it comes up as a "DOT" arrow.
I can change this in the Properties, but who wants to do that every time? When I go back to "_LE QLEADER" and go to settings, the arrow block is set back to DOT, even though I just changed it to "closed filled".
I used "rename" to rename my "closed filled" block to "dsfsdfsdf", in case the block got redefined somehow.My dimblk is set to "", as are dimblk1 and dimblk2. Tried both setting of dimsah as well.
I do not see any "CExxxxxx" variable which might control this.
I have a lisp program that creates a arch leader with a arrowhead on the end. All of a sudden the arrowhead does not appear on the end of the leader but out on space. Not sure what this is happening.
I have a multileader with attributed labels in a block, see included png file. The attributes are indicated by the rectangled text. As you can see the block looks fine, but the leader attaches itself to the insertion point of the block. I want the leader to justify automatically left or right, depending on the drag position of the block. One thing I noticed is that if the block contains an odd number of text lines the leader will automatically self justify. An even number of text line produces what I have here.
I have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
I have various multi leader styles set up in my drawing. I place a multi leader (arrow and text not seperate mtext) then decided to change it to a different leader style let's say from ML48 to ML96. The problem happens when I try to change it again. It doesn't update to my new multi leader style. Example....from ML96 back to ML48 or any other style. It seems like I only get one opportunity to apply a different style.
Is it possible to have 1 instance of a dynamic block (with multiple visibility states and/or look up properties) in your drawing and view a different visibility state or look up in different viewports?
i have a dynamic block that my firm has been using. we're updating our dimstyles - and our new leader is a custom (close to open 30 but with heavy accents).
anyway - i'm a little new and vague as how to change the leader within the dynamic block. i fiddled with it several times - but with no success.
I am using vanilla autocad 2011. installed from the autocad mechanical suite. I keep having a problem when copying blocks, leader lines and text, they sometimes apear bold in paper space. I have used the trick of changing the Z dimension from 0 to 1 and back to 0. My leader lines do not have the ability to do that. How can I keep this from happening. Autocad 2010 never had this isssue. Attached is a capture of the problem, you will see the bold text.
I designed a dynamic block to represent the profile of boreholes, and its different layers (depths, in profile) are linked to the respective description text by a leader.
Problem is when I flip the text with its leader, the tip of the arrow loses contact with the borehole. And as I flip more times, the further it gets from its original position.
Is there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
C3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
Is there a way to change attribute properties (ex. text width factor) when the block is inside a multi leader? Double click on it only show the attribute value, not the enhanced attribute editor.
Any way to control the visibility of any XRef in a drawing using Excel or Text file. For instance, I have 50 Xref placed in there positions and I want AutoCAD to select what should be visible by reading an external file--Excel or Text file.
When I use visibility of dynamic block, I found it's a great feature. But when I have more objects involved in it there will be too many states.
If we have 'visibility action' beside 'visibility set' maybe it will make thing better, when use it with lookup table. Each visibility action can has it's own set of objects. Put actions in lookup table to hide and show the set combined with them.
I have this block (see attachment) with three attributes and a visibility parameter that I want to hide one, two or all attributes. It works well while I'm in the block editor but it will not work properly when used in the drawing. The option of "Point only" does not hide all attributes of some reason.
I am trying to have my block with different visibility options but i don't want a long list to choose from under one parameter. If I did what I am wanting to in one visibility it would be a very long list of different combination options. The list would have 16 different options. Is there a way to have multiple visibility parameters?
When I use qleader with mtext annotation , The arrow and texts are inserted as two unit. I can rember there was a facility to use this two objects as a one unit.
In Inventor dwgs when I turn the visibility of the harness assembly off (the icon turns gray) the harness still remains visible in the View on the dwg. My co-worker is having the same problem. This is happening on several different inventor dwgs where the harness is not visible (the visibility is turned off) but once an edit is made to the assembly (such as making a part visible) the harness becomes visible even the the visibility is turned off in that View. I don't know if this is related to the recent installation of service pack 4 for inventor 2010 as this problem recently began occurring.
I am creating some table of contents. The first column contains symbols that are inserted blocks. Now, when I've created dynamic blocks I've made them to have more visibility states. If I insert the block that has such states, only the saved state is visible. Is there any way that I can use more visibility states when inserting some block into table.
At the moment the only solution is to insert another simplified block that I've created just for this insertion. That way my blocks library is getting bigger and bigger only because of this. I don't use simplified blocks in my drawings, except for the thingy mentioned above.
