i have a dynamic block that my firm has been using. we're updating our dimstyles - and our new leader is a custom (close to open 30 but with heavy accents).
anyway - i'm a little new and vague as how to change the leader within the dynamic block. i fiddled with it several times - but with no success.
I have attached necessary files with this post
i have a dynamic block that my firm has been using. we're updating our dimstyles - and our new leader is a custom (close to open 30 but with heavy accents).
anyway - i'm a little new and vague as how to change the leader within the dynamic block. i fiddled with it several times - but with no success.
I try to created new multi leader style with custom block but I don't see my block on list.
View 8 Replies View RelatedI designed a dynamic block to represent the profile of boreholes, and its different layers (depths, in profile) are linked to the respective description text by a leader.
Problem is when I flip the text with its leader, the tip of the arrow loses contact with the borehole. And as I flip more times, the further it gets from its original position.
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
I have a dynamic block that I want to be added to a leader style. When I create the style and draw a leader I don't have access to the dynamic block functionality. Is there a way to restore this functionality without exploding the leader?
View 5 Replies View RelatedI am trying to make dynamic blocks to show reinforced slab bars detail. Attached herewith is a dynamic block which shows the bars. Now i want to attach a leader to the block (having framed text) whose text values may vary from a, b, c, d, to say k. Is there anyway by which is can have the preset values that can be picked from a pull down menu.
View 5 Replies View RelatedSo I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
I have a multileader with attributed labels in a block, see included png file. The attributes are indicated by the rectangled text. As you can see the block looks fine, but the leader attaches itself to the insertion point of the block. I want the leader to justify automatically left or right, depending on the drag position of the block. One thing I noticed is that if the block contains an odd number of text lines the leader will automatically self justify. An even number of text line produces what I have here.
View 3 Replies View RelatedMy text style height is set to 1/8, however my leader text height is 3/16. How do I change the leader text height? T
View 6 Replies View RelatedIs there a way to rearrange custom block properties in a DB?
View 9 Replies View RelatedIs there a way to change attribute properties (ex. text width factor) when the block is inside a multi leader? Double click on it only show the attribute value, not the enhanced attribute editor.
View 2 Replies View RelatedI want to change the text "A" in my dynamic block to "B,C,D,E,..." When i click on a blue arrow. and the text "16 A" to "20 A , 25 A, ..." When i click on another blue arrow. Text Dynamic Block.jpg
View 9 Replies View RelatedWhen I use visibility of dynamic block, I found it's a great feature. But when I have more objects involved in it there will be too many states.
If we have 'visibility action' beside 'visibility set' maybe it will make thing better, when use it with lookup table. Each visibility action can has it's own set of objects. Put actions in lookup table to hide and show the set combined with them.
We have a dynamic section marker block. You can flip it, rotate it and stretch it. Some of our drawings have a lot of them. For some instances of the block that are rotated, opening the drawing or inserting another copy of the block causes the fill in the arrow to move back to its original orientation (see images). The darn things even plot incorrectly.
Flipping the broken ones back and forth fixes them, but it is silly that a drafter would have to do that with each one.
I'm having is that this is happening with a dynamic block. I don't know how it got this way...some 'genius' in my office went into this file and screwed something up, and saved it...so now I'm left with the task of fixing it.
When I go into the block, it opens as a regular drawing, with a dynamic block inside of it...as opposed to opening in the block editor. I just need to know how to get this back to the way it should be, without having to redraw the entire thing from scratch. I made a few scrap-copies of the drawing to fool around with and I can't find a solution. I tried deleting the block and purging it, I tried exploding it, and I tried saving it directly from the block editor...nothing worked.
i'm trying to work with a block by changing the x or y value in properties -- but when i do, the block disappears. i don't work with blocks very often, but someone i'm working with sent me his blocks and i can change the height or width very easily in the properties window -- and his blocks don't disappear!
why are mine disappearing?
I've created a dynamic block that simply flips a connector input from a connector output. Like This:
Attachment 26540
But if you put more than three numbers after the L- prefix, the alignment gets screwed up. Is there a way to change text alignment in a dynamic block? Or, conversely, what do the Align and Fit justifications do? Could I make those work for this purpose?
I have this block with u-bolts , i don't use imperial and would like to change it to metric , how can this be done?
View 5 Replies View RelatedI am trying to make a dynamic block below. I need the "end" of the line to be "moveable". I've tried the point parameter and the stretch action with no luck.
View 9 Replies View RelatedI have a block that I'm trying to convert for dynamic use.
In the first image, you'll see the items that I want to have rotatable in blue. The items in red should NOT rotate. That part seems to work fine. But the items that do rotate don't behave as expected.
I created the rotate parameter selecting the center of the red circle as the base point. Shouldn't that cause ALL the items to rotate about that center point?
As you'll see from the second image, the blue line rotates about some other point.
EDIT: Well I guess it only does it if I have the blue horizontal line defined with a length constraint. I also need to have that line dynamic--I need to make it longer/shorter.
I've attached a dwg file with the block in it--it's at the top of the block list (___SectMark2).
I have created a dynamic block and have applied some lookup tables to it but its not working just the way I want it. I think its to do with the custom entry on the lookup tables. If I delete the custom entry when i select the block in model space the drop down select box to allow me choose a selection is no longer available. How can I remove the custom entry and still have the block working normally. I've attached the block.
View 9 Replies View RelatedWhile in the Dynamic Block Editor, there times you may zoom in and out.The Parameters & Actions icons & text might get really large.
Before Ribbons, there was a flag at the top of the Display which would reset the sizes.
can not find any way to reset the sizes so I can continue the editing.
The only way I've found to accomplish that is to exit from the Block Editor and re-enter it.
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies View Related“Dynamic block” that contains an inserted “field”,
I’m now encountered into two problems with this regard:
Why sometimes we get the number sign “####”?How can the field automatically be updated in case a “stretch” is made without the need to go and click “update fields”?How to make the “precision” of the field value (which represent the length) to be 5 such that the 2568 will appear as 2570 and the 2563 will appear as 2565
I’m attaching the block in case your time permits to have a look
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to create a dynamic block that represents a cable with an attribute attached. The block is essentially a line that runs along the Y axis. I have created a distance parameter with a stretch action attached. The line is to remain anchored at the top and the bottom end is permitted to stretch.
Problem: I have an attribute inserted to the left side of the line (offset at -2mm TC insertion) at a rotation angle of 270. When I select the stretch grip (in the drawing environment) I would like the attribute to remain centered with the line maintain the offset and maintaining the rotation angle. I have exhausted all of my options (limited experience).
I was wondering if there is a way to link one parameter to another. What i'm doing is creating a theater flat block that has adjustable length and width. There are support members that are needed when it gets big enough. Right now i have them set to a Visability parameter and have to select to turn them on and off in model space. Is there a way to link the Visability so that it changes based on the Linear Distance parameter's lenth?
View 1 Replies View RelatedHow do I go about getting a custom scaled block at 1''=20' to scale (back to a 1 to 1 scale).
View 2 Replies View RelatedWe have specialized electrical schematic drawings on what is termed roll-drawings. These roll-drawings are simply 12" tall and variable width type drawings. We've had some as short as 24 inches and as long as 900 inches. As a result we use these section dimensions to distinguish circuit boundaries. It's not a real dimension, just a way to distinguish what circuit is located where. I've tried to recreate it using a block for improved automation as currently we just use a lisp routine that draws an arrow and lines. It looks like the screen capture of my block below. Is it possible to have the inside endpoints of the lines automatically stretch outwardly toward the arrows as the attribute Value changs?
View 3 Replies View RelatedI am attaching my dynamic block that I am having difficulty finalizing. My goal is to be able to stretch or resize the hvac block, based on the size that is provided to me (ala 24x24, 36x36, 48x72, etc) (Stretch Action), I have that figured out, and I have the symbol in the center that stays centered as the block size changes, (Move Action).
Here is my problem, I want the symbol in the center to stay centered and scale based on a ratio as the overall size gets larger. So for example: if my size is a 24"x24" I want the symbol in the center to be approx 12" dia, but if the size gets up to say 60"x60" I want it to scale accordingly (so it could be like 48" dia), specifically maintaining the size based on the x axis, so if the it gets to a 60x72", I'd like it to still be centered but size according to the 60 width, and not stretch and look awkward. I want the center symbol to scale and stay centered in the rectangle as I scale the size.
