I've created a dynamic block that simply flips a connector input from a connector output. Like This:
Attachment 26540
But if you put more than three numbers after the L- prefix, the alignment gets screwed up. Is there a way to change text alignment in a dynamic block? Or, conversely, what do the Align and Fit justifications do? Could I make those work for this purpose?
I want to change the text "A" in my dynamic block to "B,C,D,E,..." When i click on a blue arrow. and the text "16 A" to "20 A , 25 A, ..." When i click on another blue arrow. Text Dynamic Block.jpg
View 9 Replies View RelatedIs it possible to make a dynamical block where the attribute is horizontal in combination of the alignment parameter (not rotate)? If I align to an arc the attribute need to stay at an horizontal position.
View 4 Replies View RelatedI have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
I am working on making some view tags, and I would like the underline between the tag's title and the scale (any arch or engineer would know what im talking about) to stretch as text is added or taken away. Basically I want the right end of the underline to always be aligned with the right "edge" of the last letter of text. And no, I can't just underline it, the architect is very particular about not doing that. Right now I have this awesome dynamic sheet view tag with a rotatable north arrow and a dozen visibility states for the scale bars, but it all seems in vain if I still have to work with it manually. The text is an attribute, no special properties or settings, just locked in position.
View 6 Replies View RelatedI have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.
Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.
Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.
I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.
AutoCAD 2013LT
I have a simple little block that has an alignment parameter so I can pop it on a wall, pointing the way I need. I would like to add a line of text that will keep a rotation of 0deg no matter which way the block goes in. I can do it with bedit after the fact, but can I set the block up to insert correctly to start with?
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
i'm trying to work with a block by changing the x or y value in properties -- but when i do, the block disappears. i don't work with blocks very often, but someone i'm working with sent me his blocks and i can change the height or width very easily in the properties window -- and his blocks don't disappear!
why are mine disappearing?
i have a dynamic block that my firm has been using. we're updating our dimstyles - and our new leader is a custom (close to open 30 but with heavy accents).
anyway - i'm a little new and vague as how to change the leader within the dynamic block. i fiddled with it several times - but with no success.
I have this block with u-bolts , i don't use imperial and would like to change it to metric , how can this be done?
View 5 Replies View Relatedi have a dynamic block that my firm has been using. we're updating our dimstyles - and our new leader is a custom (close to open 30 but with heavy accents).
anyway - i'm a little new and vague as how to change the leader within the dynamic block. i fiddled with it several times - but with no success.
I have attached necessary files with this post
I have created a library of dynamic blocks in AutoCad10. When I craeted them I could click on the Grip for a Linear Parameter that was associated with a Stretch Action and the current value would be displayed (Example: The width of a block). I could type in a new value and the block would stretch to that value. Something changed this week when I attempted to use my blocks. When I click on the Grip no dimension is displayed. The command line shows "Specify point location or [Base point/Undo/Exit]". I can drag the grip to change my block but I cannot simply type in a new dimension as before.
View 2 Replies View RelatedI am trying to insert a Dynamic Block and change it's Visibility State. I can insert the block, and the visibility state changes, however, if I manually try to change it after, it does not change, even though the value has changed. My code executes and returns no errors, so I am assuming that I have done something wrong, or missed something out.
public class MyCommands { [CommandMethod("MyGroup", "Bolts", "MyCommandLocal", CommandFlags.Modal)] public void MyCommand() // This method can have any name {
[Code].....
If I insert my block manually, I can change the states and it works fine, but the code seems to break the block.
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a do-nut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout.
I created another block with the same entities but I also added a couple of lines extending out from the center of the do-nut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
I'm just trying my hand at learning to create some dynamic blocks, but need a solution to keep the text unrotated. I have attached a file of my troublesome file for you experts to look at, if possible.
PileTest.dwg
The file is basically a plan view of 4x foundation columns for overhead line towers (pylons). These towers can be different sizes and at different orientations, hence the dynamic options I have applied. However, when I rotate the block I want the text to rotate with it (to keep aligned with each column A, B, C, D), but I don't want rotation to be applied to the text, if that makes sense?
I have a feeling that constraints might work, although I know nothing about them, but these usually lag my PC. At present I am having to explode the block and apply a 0 rotation to all the text.
I am working on creating a dynamic block library and am having several problems with text within my blocks. For example... I am working on a North Arrow block and would like the text to rotate with my block, but I want the text to remain right-side up. When I rotate the arrow past 180 degrees the text is upsidedown.
View 1 Replies View RelatedI have a section symbol that I want to rotate and keep the text at 0degress relative to UCS. The text is not in the middle so I can't rotate about the cetner of the text. I'll attach the block so it's more clear.
Right now the only fix is to assign a seperate rotation grip to both attribute text items.
I have a dynamic block (attached) for our single line schematics. It works great, but there's a piece missing. The text in the file (In / Out) I would like to have insert with the block, but it needs to be editable, so it can't really be PART of the block... if that makes sense.
If at all possible, I'd like to have the text array down when you stretch the block...
I want to make a dynamic block of just text. I want to be able to insert a block with a drop down pick list of preset texts and select the text I want it to display.
The attached file containing the various options of text I want to be able to pick from the list. I want to maintain the insertion point common to each text variation shown with a crosshair and the justification of the text as right and the height as 10. I would like to know how to add/remove variations to the block too.
LINK TO FILE IF ATTACHMENT DOESN'T WORK
[URL]......
I am not familiar at all with the controls in the block editor.
When I put a flip option on a text in Dynamic Blocks, during the flipping the text is mirrored. is there any way to preventing this?
View 9 Replies View RelatedI have attached a basic PTZ block and what I want it to do is when I rotate the block past a certain point +/-90 degrees the text rotate within the rectangle so it's never upside down.
Can I get any direction on what route I need to take to get this done?
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies View RelatedI have encountered a problem with some of my 'Dynamic Blocks', which seem to have become corrupted & have incorporated differing attributes. The text has moved out of the field it was originally intended to be in & I can not get it to return to its correct location, using 'Block Editor'. After testing one particular block, I have discovered it has picked-up contrasting attributes:
(i) If one 'double-clicks' on the dynamic block the 'Attributes dialog box' offers one set of 'Text Options.' However,
(ii) If the Block Attribute Manager command 'Battman' is used for the same block, different 'Text Options' are shown?
These are un-editable, without losing all of the data in the drawing. Moreover, I cannot get into the depths of the drawing to synchronize it without losing all of the data? Plus, it will not allow me to redefine the block, via the design center, Blocks (Right-Hand Click & redefine). Plus, I cannot drop a fully functioning block in from another drawing & redefine?
Wondering if there was a way to have text maintain a rotation angle of 0 while being included in a rotation parameter. I am wanting the "N" for my North Arrow to follow the direction of the symbol of my viewport tag without the "N" character rotation angle changing with it.
View 9 Replies View RelatedI am using AutoCAD 2011, there are new options of "no columns" "dynamic columns" and "static columns" for multiple text. I am used to "No columns" but it seems to be set to "Dynamic columns" by default, wonder if there is any setting to change default to "No columns". Or any Lisp can be used.
View 1 Replies View RelatedHow can one add numbers in text strings that are in seperate blocks or dynamic blocks with pull down menus? I can get a sum of numbers in a text string to add up, but once it is in a block or dynamic block with pull down menus they don't all add up.
How can one bcount dynamic blocks with pull downs?
So I just recently upgraded from LT2005 to LT2009 and am having trouble creating a Dynamic Block.
I am trying to create a 6-sided polygon with a text attribute of either 1 or 2 digit numbers to be used as a hex note. The problem I am having is getting the text to be centered within the polygon and the correct text height.
Attached is a dynamic block of a smoke/c.o. detector. I have a few of these on a floor plan and at times the entire floor plan needs to be mirrored. I would like the text itself to mirror as well so I don't have to select each dynamic block and mirror it again to read correctly.
I have mirrtext set to 0. I have read that creating attributes will solve this problem however I have created attributes in the dynamic block and I still cannot get it to read correctly when mirrored.
I just learn about dynamic block. How to edit text inside dynamic block without using block editor. I want directly edit text inside.
View 1 Replies View RelatedI'm trying to make a dynamic block with attribute text. I've made a FLIP action to it but the text will not follow.
In the Command Window i get this text
Select objects: Specify opposite corner: 16 found
Select objects: 6 unlocked AttDefs filtered from selection.