AutoCad :: Dynamic Block Field Text Moved
Mar 13, 2013
I have encountered a problem with some of my 'Dynamic Blocks', which seem to have become corrupted & have incorporated differing attributes. The text has moved out of the field it was originally intended to be in & I can not get it to return to its correct location, using 'Block Editor'. After testing one particular block, I have discovered it has picked-up contrasting attributes:
(i) If one 'double-clicks' on the dynamic block the 'Attributes dialog box' offers one set of 'Text Options.' However,
(ii) If the Block Attribute Manager command 'Battman' is used for the same block, different 'Text Options' are shown?
These are un-editable, without losing all of the data in the drawing. Moreover, I cannot get into the depths of the drawing to synchronize it without losing all of the data? Plus, it will not allow me to redefine the block, via the design center, Blocks (Right-Hand Click & redefine). Plus, I cannot drop a fully functioning block in from another drawing & redefine?
View 0 Replies
ADVERTISEMENT
Jan 24, 2012
Yesterday this issue was like it should be in LT 2012. Today it had changed.
Lets say i give command L. It nicely shows up in command field, i press enter, now i have command LINE. It asks for first point. I give 0,0,0. Problem is that suddenly that 0,0,0 shows in screen next to cursor instead of command line.
I want to give all commands and related to the command line. How can i change this back as i cannot find correct tab?
View 2 Replies
View Related
Mar 2, 2012
I have a dynamic block with mostly visibility parameters and a couple stretch and array actions. I am using multi leaders with fields that are supposed to reference custom properties from the sheet set. I have mtext with fields in paper space that are referencing the custom properties fine but none of the blocks with fields are working.
block1.dwg
View 4 Replies
View Related
Oct 4, 2012
I'm following this tutorial, trying to create a field in a dynamic block to show the length of a line. If I have the attribute's "constant" value checked, the field shows up in my drawing as "Length: ######." However, when I uncheck the "constant" checkbox, the field doesn't show up at all, even after I run "UPDATEFIELD" and "REGEN."
I'm using AutoCAD Mechanical 2009, SP2.
View 4 Replies
View Related
Mar 18, 2012
“Dynamic block” that contains an inserted “field”,
I’m now encountered into two problems with this regard:
Why sometimes we get the number sign “####”?How can the field automatically be updated in case a “stretch” is made without the need to go and click “update fields”?How to make the “precision” of the field value (which represent the length) to be 5 such that the 2568 will appear as 2570 and the 2563 will appear as 2565
I’m attaching the block in case your time permits to have a look
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 1 Replies
View Related
Jun 5, 2007
Attached is my latest block that I'm working on. how to keep a field readable (horizontal) when rotated. What I need to do to update a field that is linked to an attribute when the attribute value is changed? The UPDATEFIELD command does not seem to work on it for me.
View 9 Replies
View Related
Jul 16, 2013
I have a dynamic block.
It has length and width stretch actions activated by grips. (Works fine).
It has an attribute for the user to type in a height value. (attribute insert box appears on block insert and when double clicking block).
It has Mtext "worktop [field] High" the [field] is looking at the attribute value so in theory should return the value the user types. But no only ---- shows. regen/regenall/battman fieldeval 31
Am I missing something i have pointed the field to tag/prompt as test and they show up in the mtext.
View 5 Replies
View Related
Oct 3, 2013
I have a dynamic flat screen tv block. Its length flexes to match the lookup table chosen size...32" 42" (the length parameter being a defined mm length) etc i want to display the 32" 42" etc items from the lookup properties table, but i'm at a loss as to how to go about it.
currently i am using an attribute with a field pointing to lookup parameter/object/lookup description string but it's returning hashes.
block.png
View 2 Replies
View Related
Sep 27, 2012
I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies
View Related
Apr 26, 2012
I want to insert a text into a block that contains a field. The field I want to look up the value of an attribute that is also contained in the block. Now when I have this complete and then change the block attribute the fields do not update to the new value of the attribute. An example file is attached.
Now I am open to creating the block in a different way, so any way to make this concept work? I want everything to be contained in the block.
I already tried to work around my problem by making 2 separate attributes, where the 2nd attribute contains the field that looks up the value of the 1st attribute - this did not work. Another thing I tried was after the block was made, I edit the 2nd attribute by inserting the field and this worked fine - the down side is that the field is not the default of the attribute (so the block must already be present in the drawing model space and that instance must be copied to make more).
View 5 Replies
View Related
Sep 17, 2013
I am working on making some view tags, and I would like the underline between the tag's title and the scale (any arch or engineer would know what im talking about) to stretch as text is added or taken away. Basically I want the right end of the underline to always be aligned with the right "edge" of the last letter of text. And no, I can't just underline it, the architect is very particular about not doing that. Right now I have this awesome dynamic sheet view tag with a rotatable north arrow and a dozen visibility states for the scale bars, but it all seems in vain if I still have to work with it manually. The text is an attribute, no special properties or settings, just locked in position.
View 6 Replies
View Related
Feb 3, 2012
When editing block in-place, not onely objects in the block, but also other objects (just drawn normal in modelspace), is affected by the commands.
View 6 Replies
View Related
Apr 17, 2013
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
View 1 Replies
View Related
Apr 17, 2013
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a do-nut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout.
I created another block with the same entities but I also added a couple of lines extending out from the center of the do-nut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
View 6 Replies
View Related
Nov 25, 2013
I'm just trying my hand at learning to create some dynamic blocks, but need a solution to keep the text unrotated. I have attached a file of my troublesome file for you experts to look at, if possible.
PileTest.dwg
The file is basically a plan view of 4x foundation columns for overhead line towers (pylons). These towers can be different sizes and at different orientations, hence the dynamic options I have applied. However, when I rotate the block I want the text to rotate with it (to keep aligned with each column A, B, C, D), but I don't want rotation to be applied to the text, if that makes sense?
I have a feeling that constraints might work, although I know nothing about them, but these usually lag my PC. At present I am having to explode the block and apply a 0 rotation to all the text.
View 8 Replies
View Related
Jul 11, 2011
I am working on creating a dynamic block library and am having several problems with text within my blocks. For example... I am working on a North Arrow block and would like the text to rotate with my block, but I want the text to remain right-side up. When I rotate the arrow past 180 degrees the text is upsidedown.
View 1 Replies
View Related
Jul 11, 2011
I have a section symbol that I want to rotate and keep the text at 0degress relative to UCS. The text is not in the middle so I can't rotate about the cetner of the text. I'll attach the block so it's more clear.
Right now the only fix is to assign a seperate rotation grip to both attribute text items.
View 4 Replies
View Related
Apr 21, 2011
I have a dynamic block (attached) for our single line schematics. It works great, but there's a piece missing. The text in the file (In / Out) I would like to have insert with the block, but it needs to be editable, so it can't really be PART of the block... if that makes sense.
If at all possible, I'd like to have the text array down when you stretch the block...
View 9 Replies
View Related
Aug 6, 2013
I want to make a dynamic block of just text. I want to be able to insert a block with a drop down pick list of preset texts and select the text I want it to display.
The attached file containing the various options of text I want to be able to pick from the list. I want to maintain the insertion point common to each text variation shown with a crosshair and the justification of the text as right and the height as 10. I would like to know how to add/remove variations to the block too.
LINK TO FILE IF ATTACHMENT DOESN'T WORK
[URL]......
I am not familiar at all with the controls in the block editor.
View 9 Replies
View Related
Mar 20, 2008
When I put a flip option on a text in Dynamic Blocks, during the flipping the text is mirrored. is there any way to preventing this?
View 9 Replies
View Related
Aug 30, 2011
I have attached a basic PTZ block and what I want it to do is when I rotate the block past a certain point +/-90 degrees the text rotate within the rectangle so it's never upside down.
Can I get any direction on what route I need to take to get this done?
View 1 Replies
View Related
Jun 3, 2012
I want to change the text "A" in my dynamic block to "B,C,D,E,..." When i click on a blue arrow. and the text "16 A" to "20 A , 25 A, ..." When i click on another blue arrow. Text Dynamic Block.jpg
View 9 Replies
View Related
Jan 17, 2012
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies
View Related
May 25, 2010
Wondering if there was a way to have text maintain a rotation angle of 0 while being included in a rotation parameter. I am wanting the "N" for my North Arrow to follow the direction of the symbol of my viewport tag without the "N" character rotation angle changing with it.
View 9 Replies
View Related
Mar 4, 2011
I've created a dynamic block that simply flips a connector input from a connector output. Like This:
Attachment 26540
But if you put more than three numbers after the L- prefix, the alignment gets screwed up. Is there a way to change text alignment in a dynamic block? Or, conversely, what do the Align and Fit justifications do? Could I make those work for this purpose?
View 1 Replies
View Related
Sep 12, 2012
I am using AutoCAD 2011, there are new options of "no columns" "dynamic columns" and "static columns" for multiple text. I am used to "No columns" but it seems to be set to "Dynamic columns" by default, wonder if there is any setting to change default to "No columns". Or any Lisp can be used.
View 1 Replies
View Related
Oct 19, 2013
How can one add numbers in text strings that are in seperate blocks or dynamic blocks with pull down menus? I can get a sum of numbers in a text string to add up, but once it is in a block or dynamic block with pull down menus they don't all add up.
How can one bcount dynamic blocks with pull downs?
View 0 Replies
View Related
May 4, 2011
So I just recently upgraded from LT2005 to LT2009 and am having trouble creating a Dynamic Block.
I am trying to create a 6-sided polygon with a text attribute of either 1 or 2 digit numbers to be used as a hex note. The problem I am having is getting the text to be centered within the polygon and the correct text height.
View 1 Replies
View Related
Nov 27, 2012
Attached is a dynamic block of a smoke/c.o. detector. I have a few of these on a floor plan and at times the entire floor plan needs to be mirrored. I would like the text itself to mirror as well so I don't have to select each dynamic block and mirror it again to read correctly.
I have mirrtext set to 0. I have read that creating attributes will solve this problem however I have created attributes in the dynamic block and I still cannot get it to read correctly when mirrored.
View 3 Replies
View Related
Oct 23, 2013
I just learn about dynamic block. How to edit text inside dynamic block without using block editor. I want directly edit text inside.
View 1 Replies
View Related
Apr 27, 2012
I'm trying to make a dynamic block with attribute text. I've made a FLIP action to it but the text will not follow.
In the Command Window i get this text
Select objects: Specify opposite corner: 16 found
Select objects: 6 unlocked AttDefs filtered from selection.
View 0 Replies
View Related
