AutoCAD LT :: 2012 - Insert Text Into Block That Contains A Field
Apr 26, 2012
I want to insert a text into a block that contains a field. The field I want to look up the value of an attribute that is also contained in the block. Now when I have this complete and then change the block attribute the fields do not update to the new value of the attribute. An example file is attached.
Now I am open to creating the block in a different way, so any way to make this concept work? I want everything to be contained in the block.
I already tried to work around my problem by making 2 separate attributes, where the 2nd attribute contains the field that looks up the value of the 1st attribute - this did not work. Another thing I tried was after the block was made, I edit the 2nd attribute by inserting the field and this worked fine - the down side is that the field is not the default of the attribute (so the block must already be present in the drawing model space and that instance must be copied to make more).
I have encountered a problem with some of my 'Dynamic Blocks', which seem to have become corrupted & have incorporated differing attributes. The text has moved out of the field it was originally intended to be in & I can not get it to return to its correct location, using 'Block Editor'. After testing one particular block, I have discovered it has picked-up contrasting attributes:
(i) If one 'double-clicks' on the dynamic block the 'Attributes dialog box' offers one set of 'Text Options.' However, (ii) If the Block Attribute Manager command 'Battman' is used for the same block, different 'Text Options' are shown?
These are un-editable, without losing all of the data in the drawing. Moreover, I cannot get into the depths of the drawing to synchronize it without losing all of the data? Plus, it will not allow me to redefine the block, via the design center, Blocks (Right-Hand Click & redefine). Plus, I cannot drop a fully functioning block in from another drawing & redefine?
Got a nested symbol. Rather simple one. Inside the symbol is a background rectangle and a text field. When I click a button, it should insert the HTML I give it from the click event.
Now initially I did this by just using the text field by itself. No nesting. This is the code:
sym.$("copy").html("Edge Rocks!"); OK, success! The text loaded just fine.
Now let's insert that text field inside of a symbol. And let's call that symbol 'content'.Now I try....
sym.$("content").$("copy").html("Some new text");
Result? Nothing.
Tried using stage instead of sym and even added a var stage = sym.getComposition().getStage() statement before that. Nope.
How would i insert a text attribute to a block that i have already made? Does it give me the option to make the text vertical & horizontal before blocking it for use?
I am trying to create a block which consists of my company logo and some text to use on my drawing sheets or templates
I have created a block by making a autocad drawing and creating /saving it as a block .. When I insert the block into my drawing the text style changes into a different style... why is this happening and what can be done to prevent this change from occuring. I am using autocad lt 2009 and 2005 the problem is consistant with both versions...
I am using AutoCAD 2000i I would like to click a button, hide the form, pick the text, I'm only picking one text item, then insert the picked text into a block. Then put the text into the attribute in the block..Insertion point of the block next to the text item.
Private Sub CommandButton2_Click() frmGetData.Hide 'Set sset = ThisDrawing.SelectionSets.Add("SS3") Set sset = ThisDrawing.PickfirstSelectionSet sset.SelectOnScreen 'For Each ssobject In sset 'msg = msg & vbCrLf & ssobject.ObjectName [code]....
I been working through Ellen Finklesteins AutoCad bible (using AutoCad Architecture 2012) and in the first exercise (quick start, drawing a window) I was going ok until I had to edit the title block and no matter what I tried in AutoCad Architecture 2012 I could not find a way to edit the title block. Maybe I should have bought a book that was specific to AutoCad Architecture 2012.
So I created my own subscription form, I have it appear and disapear when you are on the button. And when you click on it, it stays. But how can a put in an action to add text to it?
I write a program, this program needs to insert some standard illustrations. I made these standard illustrations into different blocks. And I store these blocks in a dwg file. Everytime I need to insert some illustrations, I just click the mouse on the current drawing, I want the illustration inserted. These means the following points:
(1) Import the blocks to the current drawing, if the blocks have already been imported, then do nothing.
(2) Specify the insert point by clicking the mouse, and I want the block's insert point to coincide with the mouse clicking point.
I created a drawing document in AutoCAD LT using custom drawing properties and then inserted them as the text in blocks using insert field. I did this in AutoCAD 2012. I am now working at a new company that is using 2007. I cannot seem to access the feature in 2007. In what version did this feature become available?
I have a massive block of dummy text set up in Illustrator 5 and the easiest way for me to change the dummy text is to overwrite it as one would when using the Insert function.
I have placed a field directly into my paper space ( not in a block ) to show the current date. This is a company requirement so when the drawing is printed, it shows the date of printing. The field just shows the date that the field was inserted and doesnt update. If i replace it, i get todays date but it stays on the date.
I know I can create text and use "Insert Field" to have the filename automatically update in the title block. Is there a way to do the same thing with layout names when there are multiple layouts in one drawing file?
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
I am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt " selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt)) wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
Is it possible to insert a "field" instruction in the drawing template to get automatically the stations (beginning and end) of the long profile for the sheet considered ?
I have a block that i want to insert several times and revised each one to be different to do this i would have to insert it and rename the blocks that come in and then reinsert i would like to insert and have a lisp explode the main block and rename the other 2 blocks with a suffix at the end depending on how many times its in the drawing... can this even be done? My original block name that will be first inserted is "BENT PULLEY NOTES" it needs to explode after i drop it in and then there are 2 blocks within that called "Bent Pulley" and "Bent Pulley DYN" that i was hoping to keep the names but add a number at the end depending on how many are in the drawing already...
here is a lisp that i have found... it would work if i didn't have nested blocks and only wanted the one block to be insert and not explode...
(defun c:Test (/ e i name Bname ) (setq e nil) (command "_.-insert" "Drawing1.dwg" pause "" "" "") (if (setq e (entlast))
I have a pallete button that inserts a block then a drag jig to position it. The block is first inserted at 0,0 and dragged.
The block at 0,0 remains visible while a "duplicate" block is dragged. Is there a way to hide the original?
Insert block then calling the drag jig.. AddViewBlock(New Point3d(0, 0, 0), 0, ColorIndex, trans) psr = ed.SelectLast() DragView(psr.Value, "Bar Insertion Point")
In the DragView procedure I have:
Public Sub DragView(ByVal SS As SelectionSet, ByVal sPrompt As String) '.... Dim ppr As PromptPointResult = ed.Drag(SS, vbLf & sPrompt, New DragCallback(AddressOf MyDragCallback))
I am trying to insert a dynamic block and position and stretch the block, using the linear parameters, depending on values entered into a form.
I managed to create a form that would draw a series of boxes. And i managed to create a routine that would insert a block and size it depending on fixed values but i can't link the 2 together.
I am using Autocad 2007 I made several blocks with att. And I use this drawing and copy it to the samples/design center folder so that I can see the blocks that I created on the Design center window for use on different other drawings.
My problem is that if I make a cange on the ORIGINAL block drawing how can I update the inserted blocks on the other drawings? I try to delete the block from the local drawing insert block list (is this possible?) to paste the block again with the new changes, but somehow even when I grab the new modified block to inserted again when I do it, it takes the shape of the old version!
Is it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
Drawing contains a block with "BlkName". I want to insert blockreferences of this existing block using .Net. All shows how to insert a new block and then use the BlockID returned by the insert function. In my case I only have the block name and there is no Block id. How to get it or how to create a block reference of an existing block?
We are using both AutoCAD 2013 and AutoCAD LT 2013, and are having some difficulties doing something that seems reasonable...
Basically, we made a block that has the following attributes:
LENGTH ORDER CUT-OFF MATERIAL CUT-LENGTH CUT-WEIGHT CUT-PER-FOOT
When we define this block, we set the value for "CUT-WEIGHT' as (CUT-LENGTH - WEIGHT-PER-FOOT) and "CUT-LENGTH" as (LENGTH - CUT-OFF)
Those formulas work when we initially create the block. The goal is to be able to change the "LENGTH" and "CUT-OFF" attributes, and have the block automatically calculate the CUT-WEIGHT and CUT-LENGTH based on those values.
The issue is that once the block is created, the formulas no longer work. We have tried Update Fields, we have tried REGEN, REGENALL and more, but nothing seems to work. The only thing we have been able to do is define the block, then basically create the block a second time, with those respective attributes being linked to the initial block, which is both not ideal, and created other problems.
I am attaching a copy of one such block, how to make this block work properly.
The final use of this block is to insert it into Shop Drawings for our Companies Products and then link the block to a table that shows the values of the blocks as a Bill of Materials.
I am unable to currently upload a copy of any Shop Drawings, but if need be, I could ask for a "Dummy" Shop Drawing that I could upload.
I am trying to insert a text field into a block attribute and setting that field to display the information of an attribute in another block. What happens is that when I close the file and re-open it the text field loses its connection to the attribute that it is referencing.
Now, I have been able to make this work in the passed, however the difference now is that I am asking the text field to reference an attribute of an annotative block. That appears to be the reason it does not work.
How to make this work with annotative blocks? Is it a system variable I can change?
I created an attribute called ScaleA1, which I want to double click on this block and enter that number.
Then I created a text object with 2 fields in it. The first field is set to read the Value of that Attribute. The second field is a formula (2*Value of Attribute).
However, instead of the field displaying the Value of the Attribute, it displays the Default of the Attribute.
I hope to fix this bug so that it will update when I change the attribute from paper space.
Currently it will only update if I go into the block editor and change the default of this attribute.
I have a dynamic block with mostly visibility parameters and a couple stretch and array actions. I am using multi leaders with fields that are supposed to reference custom properties from the sheet set. I have mtext with fields in paper space that are referencing the custom properties fine but none of the blocks with fields are working.
I'm following this tutorial, trying to create a field in a dynamic block to show the length of a line. If I have the attribute's "constant" value checked, the field shows up in my drawing as "Length: ######." However, when I uncheck the "constant" checkbox, the field doesn't show up at all, even after I run "UPDATEFIELD" and "REGEN."
I am using 2013 Inventor.My company uses the .dwg file extension instead of .idw (if that makes a difference).When I make a new .dwg file and insert an .ipt file for my first base drawing ..The material field of the .dwg Title Block is populated.This is something I would like to avoid.When I open iProps in the .ipt drawing and go to the Physical/Material Tab don’t seem to have the option to display a blank (no information) in the material field in the Title Block.The closest I can come to this is to choose Generic, which looks kind of odd.
My company chooses to give all material specs in a note displayed on the drawing.In case of a material change at some point, I do NOT want to have to change the note on the drawing AS WELL AS the Material information in the .ipt iProps.The reason is that, sooner or later, I’ll forget to change both(which will lead to confusion) and possibility lead to making junk parts (made of the wrong material) which will then have to be thrown away (at perhaps a major loss).
One of the guys here has created a title block which has a scale field in it, this field reads the scale at which the title block is brought in, by use of an invisible attribute (he used the block in model space so that's why I scale them up). When he xref the dwg into my main drawing all is fine and the scales are as they should be but when he prints, the scales all show 1:1 on the print and in the main drawing. Could this be due to the fact that the xref is brought in at 1:1? But we can't see why this would change it as the block is obviously still at e.g. 1:50 in the xref.
