When editing block in-place, not onely objects in the block, but also other objects (just drawn normal in modelspace), is affected by the commands.
View 6 RepliesI was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
View 2 Replies View RelatedI'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedIs it possible to create a text block attribute in part sketch mode?
View 2 Replies View RelatedI am building finished piping assemblies from a collection of smaller parts I have been creating and saving with WBLOCK. I found a mistake on one of my parts(I needed to rotate a piece of pipe). Because the sub-part was part of the complete assembly, I could not rotate the sub-part independently so I opened the block in the block editor. Apparently, and this was my original question, UCS commands do not work in the block editor. The result of this fact was that I could not rotate the sub-assembly in the direction it needed to go. So first question: Can the UCS be moved in the block editor?It focused on exploding blocks that would not explode. I thought if I could simply explode the block back into its component parts, I could rotate the sub-assembly. This is where everything went to hell.
I am not even sure what happened but now I have a new definition of the block that will still not explode, references itself, includes other parts I don't want and is just generally making me PDM. I figure it will be easier to just delete the entire block and redraw the components rather than trying to fix my mess. I did try the undo command but it apparently will not undo the changes to the block definition. Second question: How do I remove all traces of a block saved with BLOCK and WBLOCK so I can start fresh?
Third question: I will not create another block until I learn more about them. Any reference related to intelligent block creation?
I have encountered a problem with some of my 'Dynamic Blocks', which seem to have become corrupted & have incorporated differing attributes. The text has moved out of the field it was originally intended to be in & I can not get it to return to its correct location, using 'Block Editor'. After testing one particular block, I have discovered it has picked-up contrasting attributes:
(i) If one 'double-clicks' on the dynamic block the 'Attributes dialog box' offers one set of 'Text Options.' However,
(ii) If the Block Attribute Manager command 'Battman' is used for the same block, different 'Text Options' are shown?
These are un-editable, without losing all of the data in the drawing. Moreover, I cannot get into the depths of the drawing to synchronize it without losing all of the data? Plus, it will not allow me to redefine the block, via the design center, Blocks (Right-Hand Click & redefine). Plus, I cannot drop a fully functioning block in from another drawing & redefine?
tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
Any time I click on "Create 2D sketch" when editing a part in place in an assembly, the view moves to an isometric view. It happens as soon as I click on the button. Is there any way to stop this happening?
This does not happen when I'm editing a part (.ipt) on its own. I'm aware of the "Look at sketch plane on sketch creation" issue: this is not the same thing since it happens as soon as I click on the button, i.e. before I actually create the sketch.
I want the view to remain as it was before I click the button, to keep the things I'm looking at in view.
I'm using acad 2010. Twice now this has happened in two days. Using edit block in place. I edit the block, pick save and gone, Acad just closes down, no warning no nothing.
View 2 Replies View RelatedI use refedit quite a bit to edit blocks in-place, but can't find a way to do this with dynamic blocks without breaking the link to the original definition and creating a new block definition.
Is there a setting I can change, or another way to edit a dynamic block in-place?
When I try edit block in place this error occurred:
Errors found in references to other objects:
Object reference missing: AcDbXrecord, to AcDbBlockTableRecord
Cancel
I have a number of areas numbered 1,2,3......etc but I need to change the text to the following where only the last number that is underlined is to increase sequentially.
P23/L2/1
Could Tcount be used or is there a modified version available?
If not is there a quick way to automatically place a number block onto a drawing with a click and then for every other click sequentially increases the last number.
I was curious, when creating multi sheet drawings, how can I place different information in the title block on each drawing?
Example, 2 pages, Description on page 1 = PAGE 1 DESC, by default this same description will show up on all subsequent pages. How do I get page 2 description to be different?
Inventor 2014 PDS
Untill recently I have been able to edit my blocks or xref files in place. Now when I try do that CAD tells me to select nested item. Is this a setting a changed by mistake? If so what is it?
View 2 Replies View RelatedIs it possible to place some standard block in parts or assemblies and then make it visible in idw's.
View 7 Replies View RelatedI have a problem with the "in place" block editor, mainly because I fail to synthesise a sentence for the search that makes sense. My problem is that when I am in "edit block in place" mode I am still able to edit the drawing, so that I can still delete or stretch or move certain elements, even though they are not part of the block. This is quite annoying because it leads to unwanted changes and mistakes. Is there a variable or an option to change it and prevent any modification to anything outside of the block?
View 7 Replies View RelatedI'm trying to setup a title-block for everyone at my new place of business.
In this new job, 98% of our drawings are done in a single file with multiple layouts. I would like to set my template up so that things like Rev numbers and drawn by, and checked by etc., are updated in all layouts by changing just the first sheet. I also want to include a field for the drawn date so that it takes the current date (they want the drawn date to reflect the print date rather than the actual drawn date...)
I would like to incorporate attributes for things like checked by, engineer check, and such but make them so they don't appear unless you open the attribute editor.
Can you edit a block in place (refedit) without changing globally and without exploding within that drawing?
View 6 Replies View RelatedWhen I edit a block in place, REFEDIT toolbar pops up. This is good.
But why even I clicked "Add to working set" button on the toolbar, it still asks me select "Add" in command line?
Apparently I already selected "Add" button.
Is there a way to skip this command line option?
Our company uses xref electromechanical,
some problem we encountered after binding the xref become a block mostly like a baseplan & equipment system . can't edit block In-place in block references in latest autocad 2014 LT.
I'm trying to edit the attributes in a titleblock using VB.net. The block name is "Titleblock". It is already inserted into a drawing. My program does not need to insert it. It only needs to find the reference, for all layouts, and update a couple attributes for the titleblock on everylayout. I know some of the basics, but get confused with blocktables, and blocktablerecords.
Here is a piece of code I was experimenting with. With this code, I'm trying to get to the attributes, and read an attribute value for a drawing number. It fails when I try to assign a value to the variable blkreftitle.
Dim
doc AsDocument = Application.DocumentManager.MdiActiveDocument
Using docLoc AsDocumentLock = doc.LockDocument
Dim db AsDatabase = HostApplicationServices.WorkingDatabase
[Code]....
I edited a block in a drawing which had exactly the lineweight I wanted in my layout. After I edited it I lost the lineweight. If I try to change the lineweight for that layer it only affects the attribute. What I did and how I can get it back the way it was?
View 3 Replies View RelatedI have some new multi leader definitions using blocks, however I can only edit the attribute definition text individually, where if I had the same block as a standalone with a leader I could select as many blocks as I wanted and change the text via quick properties in one quick step. Is there a way to achieve this using a block as a base for a multileader?
View 2 Replies View RelatedWhen one edits a block all instances of the block are changed. What is the command in AC to make one instance of the block unique, so editing will not affect the instances? In Sketchup it is "make unique".
View 4 Replies View RelatedHow can you edit the name of a block without using the rename command.
What if your drawing has over fifty blocks, and your chasing the renaming of just one block?
Would this be a script type solution.. ?
I was editing a block, I saved it and closed the file. When I reopened the file, everything in model space was replaced by the block.
View 5 Replies View Relatedtrying to set up a system for a less advanced user.
basically they donot like the advanced attribute menu when you edit a block with attributes in them.
looking at the varriables the end user likes the Attdia set to 1 when you insert a block it then displays nice clean menu which just has the attributes you can edit.
can this be set so when you later edit a block this menu appear rather than the advance attribute editor?
1) Problem about viewports :
I am using 2011, I have created 17 viewports in one paper space, there are 2 viewports not showing anything. I deleted 2 viewports with content, then the 2 viewports which were not showing is now showing images.
I started a new drawing, drew something very simple for testing, I could create 63 viewports the 64th is not showing.
I would like to ask what it is to control/affect the number of viewports I can create in one paper space.
2) To Edit an Attributed Block
When double click an attributed block (command = eattedit), the dialog box "Enhanced Attribute Editor" disappeared !
I been working through Ellen Finklesteins AutoCad bible (using AutoCad Architecture 2012) and in the first exercise (quick start, drawing a window) I was going ok until I had to edit the title block and no matter what I tried in AutoCad Architecture 2012 I could not find a way to edit the title block. Maybe I should have bought a book that was specific to AutoCad Architecture 2012.
View 8 Replies View RelatedDoes any Lisp routine available to batch replace all the closed polylines with an existing block?
View 9 Replies View Related