AutoCad 2D :: Number Of Viewports And Editing Attributed Block?
Apr 21, 2011
1) Problem about viewports :
I am using 2011, I have created 17 viewports in one paper space, there are 2 viewports not showing anything. I deleted 2 viewports with content, then the 2 viewports which were not showing is now showing images.
I started a new drawing, drew something very simple for testing, I could create 63 viewports the 64th is not showing.
I would like to ask what it is to control/affect the number of viewports I can create in one paper space.
2) To Edit an Attributed Block
When double click an attributed block (command = eattedit), the dialog box "Enhanced Attribute Editor" disappeared !
View 6 Replies
ADVERTISEMENT
May 3, 2013
Editing attributed blocks causes them to disappear from the screen. Edits include changing attribute values, moving attributes, or moving the entire block. The block is not gone, so saving and re-opening the drawing will display it again, but this is a terrible workaround when moving and editing many blocks in a large drawing.
We do not use annotative or dynamic blocks, so these are just good old-fashioned attributed blocks.This behaviour is being seen on both Windows 7 and older Windows XP systems with various hardware specs, and it is only in the 2013 product. We still have some stations running Map 2012 that do not experience this issue even when working in the same drawings.
View 9 Replies
View Related
Aug 11, 2011
I am using ACA 2009 and am experiencing something new with attributed blocks. When I insert the block, a copy of the block is placed at what seems to be an arbitrary distance away. As I fill in the boxes for each attribute, it appears in the image away from the insertion point. After I am done, the completed block appears filled out where it was inserted. I have never seen this before. Is there a setting affecting this?
View 2 Replies
View Related
Aug 5, 2011
Basically I have a rectangle and want to change the dimensions of it. There are a couple of attributed definitions that I want to stretch the and change it length but I alsowant the attributed definitions to move with the right hand side of the rectangle and the stay a constant distance from the right hand side. Unfortunately when I use the stretch action it filters out the attributed from the object that I can stretch, any way to include these AD’s with the stretch action
View 3 Replies
View Related
Jan 17, 2012
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies
View Related
Dec 29, 2011
what is the easiest wqy to extract information from an attrbuted block into a spreadsheet (excel)?
View 1 Replies
View Related
Jan 24, 2013
How do you get a point marker that uses a block with attributes to show the attributed text?
We are using tree symbols that have the size of the tree as an attribute, but when the points that use that block come in...the block shows up w/out any attributed text. Tried to edit the "block" or point marker with attedit command, but C3D tells me it is not a block. Understand that it is a "marker" for the point. But, what is stopping the text size of tree from showing up?
View 4 Replies
View Related
Jun 11, 2013
Is it possible to make a pull down inside of a attributed block?
For example: if I a have engineering code section of a title block and I want to be able to choose from a list of codes:
ASME A17.1-2004
ASME A17.1-2007
ASME A17.1-2010
ASME A17.1-2012
Can I set up the block to let me do that?
View 3 Replies
View Related
Nov 11, 2013
I have the drawing I'm working on, who's scale is set to "unitless". I'm attempting to insert a series of attributed blocks (containing titleblock information) into the paperspace of my drawing. The attributed block is also set to unitless.
Two of these blocks require editing to suite the drawing, the other two are to be edited at a later date by a third party.
Everything HAD been working fine, however, it appears the wheels have fallen off ~ I'm now experiencing a periodic error where, I insert a block to the 0,0 at a scale of 1 (as per procedure) but the block comes in at a fraction of the correct scale. I have to scale the block up by 25.4. (The imperial / metric conversion.) (Note, I'm working in Metric)
Even stranger - its not happening on all blocks. Just the two that have to be edited "in house".
I've checked measureinit within the blocks and it is set to metric. I'm limited in my ability to purge / audit the drawings as they don't want template information deleted from the drawing - but I don't know what other system variables i should be looking at.
I'm using CivilCad 2012 with Windows 7,
View 3 Replies
View Related
Dec 21, 2011
This is the command line responce I get when i attempt to enter text. All teh numeric expressions of all my dimensions have been replaced with a backslash. Along with all text including infomation on the attributed title block.
I have exhausted my options for figuring it out, do I need to reload the program? is there a restore default option? ( I haven't found one yet) I am running 2011 LT
View 1 Replies
View Related
Oct 2, 2013
Is is possible to have an attributed block in a marker style or note style? I would like to have editable text upon insertion of the marker or text? I have tried unsuccessfully to get it to work. Does the fact that C3D displays the marker and note as objects prevent it from being editable? Is there a workaround?
View 1 Replies
View Related
Dec 21, 2012
I am trying to speed up some basic drafting of text revisions. In the P (plumbing) we call out the fixture units for a water pipe, along with the fixture units, the pipe size changes.
Is there any way to add numbers in an attributed block? (I have a lisp that works on text & mtext, but not attributes)
1.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to only add the 1st text fields. [If possible then change the 2nd text field according to a changeable chart. (see #2)]
1.1.1. This is how the block looks like: x (y")
1.1.1.1. x could be any number from 0.5 – 10,000 (only using 1 decimal place, and only as needed)
1.1.1.2. y could be any number from the following list: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 3½, 4, 5, 6
Is there a way like in excel that you can set up a formula that will give a numerical result depending on other input? Like pipe size that change depending on the number of fixtures. There would need to be two different formula, one for hot and one for cold values (The value would be set at the beginning of the job; typically these values would not change later in the job). This could be separate text or if possible using the attributed block as described in #1.
2.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to change the 2nd text fields according to the value in the 1st text field. If the value in {x} is 0.5 – 1.0, it would result in ½; 1.5 – 7.0 = ¾; 7.5 - 17 = 1; 17.5 – 36 = 1¼; ect.
2.2. In excel it would be =IF(x)<1,"1/2",IF(x)<7,"3/4”,IF(x)<17,"1",…{all #’s in between} …IF(x)>5000,"6")))))
View 9 Replies
View Related
Sep 13, 2013
I'd like to set up a blockwith different attributes like Roomname, Floor, Area,...
Therefore I'd like to link a polyline of the drawing with the block and it shows me its area. I know how it works with fields, but not how to connect it when the field is within a block.
Is there a LISP for that?
View 4 Replies
View Related
Dec 27, 2011
I have been working on an AutoLISP routine which is intended to:
1) collect input from the user via a DCl dialog box
a) Create a List of the non-null "GROUP_CODE..." variable values collected from the dialog's settings
b) Create a List of the "ESN***#_Part" variable values collected from the dialog's settings (does the List elements' order need to be reversed after collecting them?)
2) Prompt the user to select an insertion point
3) Insert a Block named "ESN-CONTROL-WIRED" which has multiple attributes
a) Apply the first List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the first List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block
4) Insert a second instance of the Block named "ESN-CONTROL-WIRED" below the first instance
a) Apply the second List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the second List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block etc. .... keep inserting the block "ESN-CONTROL-WIRED" below the previous on until all the input from the dialog has been displayed in the attributes.
Notes:
The Dialog's pop-up lists are populated from external .TXT files which reside on our network (or alternate local C: drive folder if no network drive is found)
Inside the file "ESN_SENSORS_NUMBER.LSP", it is the function "ESN_APPLY_TAG" which I am struggling with how to write...
find inside the .ZIP file:
- (2) example screenshot .BMPs showing dialog box settings and what the resulting output in AutoCAD should look like
- (1) ESN_SENSORS_NUMBER.LSP
- (1) ESN_SENSORS_NUMBER.DCL
- (1) ESN_SENSORS_NUMBER.DWG with a sample output - and the definition of the block ESN-CONTROL-WIRED
- (1) ESN-OCC.txt which populates the PopUp List Boxes
- (1) ESN-DAYLT.txt which populates the PopUp List Boxes
- (1) ESN-IR.txt which populates the PopUp List Boxes
View 6 Replies
View Related
Aug 9, 2013
I am reasonably experienced in coding in VBA but cannot find any references as to how to achieve the above within VBA so am now turning to LISP to see if I can achieve it in that language.
Basically I want to be able to create multiple instances of an attributed block using an external source, e.g. a spreadsheet to provide data for the attributes.
I'm not even sure if this is possible.
I can find lots of references for extracting attribute date to a spreadsheet but I want to go the other way!
View 2 Replies
View Related
Feb 3, 2012
When editing block in-place, not onely objects in the block, but also other objects (just drawn normal in modelspace), is affected by the commands.
View 6 Replies
View Related
Apr 30, 2013
I was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
View 2 Replies
View Related
Aug 31, 2011
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies
View Related
Jul 30, 2012
Is there a way to edit the an attribute data if it is defined as number to add a value of .3 to the number being displayed in this attribute box. The feature is a point and i'm looing to add the .3 value to elevation attribute value that weren't pulled from a surface or created using object data.
View 1 Replies
View Related
Jul 10, 2012
I made a simple block for a utility pole in plan view. It consisted of a donut with one string of mtext beside it. I had created it so that the text would orientate itself to be horizontal in each viewport regardless of the ucs angle. I later added a line for a guy wire and made the block dynamic with visibility states. Now I am unable to have the text orientate to a horizontal position in the viewports.
View 8 Replies
View Related
Nov 28, 2012
I've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
View 9 Replies
View Related
Jun 2, 2011
I have successfully used lisp ATTINC if normal blocks.
If not working in dynamic blocks.
When changes position of attribute becomes anonymous block (*U### = anonymous blocks).
I tried to use Unanon.lsp but disappear dynamic properties of the block.
View 7 Replies
View Related
Dec 25, 2012
In block attribute manager i can see the number of instances of the selected block in the current drawing. Can I set this value in the field?
View 4 Replies
View Related
Nov 11, 2013
I am electrical engineer and I have little experience with autocad . How can I calculate the number of acertain block in a 2D plan , such as the number of electrical socket in abig plan with autocad 2010
View 2 Replies
View Related
Jan 9, 2014
I am trying put drawing numbers on my drawings. The drawing number is "019-02-00038-x" where "x" is the page number in the set of drawings. How do I set this up? Every time I try to change "x" it changes it for the entire set of drawings.
I'm working with Inventor 2014.
View 1 Replies
View Related
Aug 19, 2013
I placed a Sheet Propertie called Sheet Number in my title block.
I want only my sheet number in my title block and not the follow number.
I found the code made bij Curtis Waguespack and changed Mid to Left.
In the message box it shows the number i want but in the title block it shows only the follow number.
My sheet number is 400:1
why dusn't show only the number 400 in the titleblock?
DimoSheetAsSheet
DimSheetNumberAsString
i = 1
ForEachoSheetInThisApplication.ActiveDocument.Sheets
SheetNumber = Left(oSheet.Name, InStr(1, oSheet.Name, ":")- 1)
MessageBox.Show(SheetNumber, oSheet.Name)
i=1+1
Next
View 5 Replies
View Related
Oct 4, 2013
I have a number of areas numbered 1,2,3......etc but I need to change the text to the following where only the last number that is underlined is to increase sequentially.
P23/L2/1
Could Tcount be used or is there a modified version available?
If not is there a quick way to automatically place a number block onto a drawing with a click and then for every other click sequentially increases the last number.
View 7 Replies
View Related
Sep 4, 2012
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies
View Related
Aug 23, 2011
I have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
View 3 Replies
View Related
Dec 3, 2013
I have excel tables that contain 4 columns of data.
The Y co-ords pf the required object
The X co-ords pf the required object
The rotation of the required object
The object number
What would I need to do to insert a block at the coordinates to the rotation shown then have a leader with the point number labeling the block (but the text not be rotated to the angle of the main block.
View 2 Replies
View Related
Apr 5, 2012
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 5 Replies
View Related
