AutoCAD 2013 :: Displaying Number Of Entry Block
Dec 25, 2012In block attribute manager i can see the number of instances of the selected block in the current drawing. Can I set this value in the field?
View 4 Replies
ADVERTISEMENT
Photoshop :: Perpetual Serial Number Entry?
Apr 4, 2013Each time I open photoshop cs6 I am told that my trial period is over and that I need to enter my serial number. After Entering the number It works fine. Even though I am starting to remember the 24 digits it is stilla pain.
View 1 Replies View RelatedAutoCAD Inventor :: Title Block - Prompted Entry In Form
Sep 14, 2013When creating a title block I use iProperties and Prompted entry.
Now I want to place all entries and properties in a form so that I have everything together.
With the iProperties it works because you can select the iproperties when you create the form but I can not select the prompted entry to place in the form
Is there a way to select the prompted entry to place in the form?
AutoCAD 2010 :: Field Displaying Current Drawing Number Plus Or Minus One
Feb 21, 2012how to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
This is the field for file name (drawing number)
%<AcVar Filename f "%fn7">%
Any way to adjust this to add or subtract one?
AutoCAD Inventor :: Read / Change Prompted Entry Through Code From Title Block
Aug 27, 2013How could I read / change prompted entry through code from title block (for example DIN) within VB.Net?
View 3 Replies View RelatedAutoCAD Inventor :: Scale In Title Block - No Prompted Entry / Keep Current Sheet Active
Apr 9, 2013 First, it requires there to be a prompted entry text box in the title block named <SCALE>, is there any way to write to a textbox that is not prompted entry? The prompt when a new drawing or sheet is created is misleading and makes users think they need to manually fill out the prompt. Secondly, this code works on multi-sheet drawings but it concludes by making the last sheet active. Since we are triggering this rule before save it's a nuisance to have the drawing switch sheets everytime you do a save. Ideally, the current active sheet should remain active when the rule runs. Here is the
For Each oSheet In ThisApplication.ActiveDocument.Sheets
ActiveSheet=ThisDrawing.Sheet(oSheet.Name)
If oSheet.TitleBlock Is Nothing Or oSheet.DrawingViews.count=0 Then Exit Sub
oTitleBlock=oSheet.TitleBlock
oTextBoxes=oTitleBlock.Definition.Sketch.TextBoxes
[code]....
AutoCAD 2013 :: Entry Point Not Found
May 20, 2013Not sure why this has happened but all of a sudden, my AutoCAD 2013 install is reporting an issue with the "Entry Point Not Found"...
The procedure entry point ?bmpout@@YAXPEB_WH@Z could not be located in the dynamic link library accore.dll.
I'm hoping this isnt related to the Windows OS which is Windows 7, 64 Bit but i do recall some updates being rolled out recently which caused problems with ESRI products...
AutoCAD 2013 :: Intermittent Command Entry And Execution Keystroke Repetition
Jan 3, 2014Product: AutoCAD 2014
OS: Windows 7 64bit
First I will state that everything within the program, to my knowledge, works just fine. Although..
I'm having a really strange issue when I try to type a command. It's an intermittent problem that occurs very often and can be extremely frustrating.
If I try to type a command, i.e.. M followed by enter to move an object, often times the command will repeat "MMMMMMMMMMMMMMMMM" and the command entry will fail. This happens for every button I press too. Letters, numbers, and even the Enter key will be repeatedly entered into the command prompt. Often times I've already pressed enter to execute the command. During this process the whole program seems to freeze, but not for too long. So I often have to enter the command multiple times, regardless of which button is repeating itself.
The repeating of a keystroke only lasts between 1-2 seconds but as I said has a very frequent occurrence.
I'm almost positive that this has nothing to do with my keyboard, as I've never experienced this kind of problem elsewhere. This is my machine at work and I've never encountered an issue as frustrating at this. Could it be something that my machine is doing?
AutoCAD 2013 :: Direct Distance Entry - Dynamic Input Turned On?
Jan 10, 2013 Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.
AutoCad :: Block Attributes Are Not Displaying?
Aug 16, 2013I created a block in the way I always do.
-draw a symbol
-define an attribute & place it
-go to draw>block>make and select the object i want to be in my block and name it.
as normal once i completed this my block appeared with the attribute window popping up as expecting looking for me enter a value for my attribute.
I intended to use this block along with the measure command to reference a number of points along a poly line as equal distanced (I've done this many items before).
when using the measure command and typing in my block name, it appears at the selected distance along the polyline, but the attribute text is not visible. when you select the block, there is no attribute within it (i.e. no attribute dialogue box appears, nor is there a field in the block properties window for the attribute to be amended).
when i insert the block into the drawing using insert>block, it appears as expected with its attribute?
I have found a work around for this, but it's not ideal. I've created a temp block from my original block, using the measure command it displays correctly. i have to then explode the temp block which leaves the original block and its attribute in place.
AutoCAD 2013
Win 7 enterprise 64-bit
8GB ram
AutoCad :: Block Attributes Not Displaying
Aug 29, 2013autocad 2012LT
block was created with attributes and displayed until today. if the block is cut and paste to a new drawing it will display the attributes.
AutoCad :: Block Not Displaying Base Point
Feb 14, 2012I received a 3rd party drawing which contains a block to indicate directions. The block does not display its base point and I am unable to find it. why this block is not displaying the base point.
View 9 Replies View RelatedAutoCad 2D :: Creating Block Which Contain Text Displaying Scale?
Nov 12, 2012What I want is to create a block which contains a bit of text displaying the scale (X scale only) of the block. Then, if I change the block's scale it will also update. Is this possible?
View 9 Replies View RelatedAutoCad 2D :: Not Displaying Length With Stretch Action In Dynamic Block
Aug 25, 2011I use dynamic blocks a lot of the time and most of them have a stretch action in them. What used to happen would be that whenever I clicked on the block I wanted to adjust and then clicked on the stretch action, it would show the distance from the base point and I was able to type in the new length of the object I was stretching. But now whenever I click on the stretch action, it shows that the current length is 0 and it is asking for the distance from the current point, not the base point. How can I change it so that it is always just the distance from the base point?
View 7 Replies View RelatedAutoCad :: Increment Number Of Block Dynamic?
Jun 2, 2011I have successfully used lisp ATTINC if normal blocks.
If not working in dynamic blocks.
When changes position of attribute becomes anonymous block (*U### = anonymous blocks).
I tried to use Unanon.lsp but disappear dynamic properties of the block.
AutoCAD 2013 :: Attribute Text Not Displaying?
Dec 27, 2012They have one file xrefed into another but the text is not showing up. It is a block and the text is an attribute - but it is exploded.
I have attached 2 images - the first one - of the original file the second - where it is xrefed into another file with the text missing.
AutoCAD 2013 :: Quick Properties Box Not Displaying?
May 14, 2012I am having trouble with getting the quick properties box to display. I have turned the feature on at the bottom taskbar, and tried Ctrl+Shift+P, and changed settings so that it displays to the top-right of the cursor, but I get nothing when I select any object. It used to work on 2012 but not now.
View 8 Replies View RelatedAutoCAD 2013 :: Attributes Show Up As Text Without Manual Text Entry?
May 16, 2012I would like to know how, if possible to make the attributes of a block show up as text. Example:
I am working on a power utility design where each power pole has a sequential name and may or may not have units that need to be added into a contract. I have my attributes set up where I can go in and assign a required number to a unit so I can export my data into excel. The problem I am having is that I have to enter the text and change the attribute quantities separately. Also, there are 40 or so different units and only a few certain ones required at each pole. Is there a way to set the attribute only to display text if the quantity is greater than zero so my list is not 40 units long at each pole?
(I am using Autocad 2013, 64 bit)
AutoCAD Architecture :: Calculating Number Of Certain Block In 2D Plan
Nov 11, 2013I am electrical engineer and I have little experience with autocad . How can I calculate the number of acertain block in a 2D plan , such as the number of electrical socket in abig plan with autocad 2010
View 2 Replies View RelatedAutoCAD Inventor :: Title Block Drawing Number?
Jan 9, 2014I am trying put drawing numbers on my drawings. The drawing number is "019-02-00038-x" where "x" is the page number in the set of drawings. How do I set this up? Every time I try to change "x" it changes it for the entire set of drawings.
I'm working with Inventor 2014.
AutoCAD Inventor :: Sheet Number In Title Block?
Aug 19, 2013I placed a Sheet Propertie called Sheet Number in my title block.
I want only my sheet number in my title block and not the follow number.
I found the code made bij Curtis Waguespack and changed Mid to Left.
In the message box it shows the number i want but in the title block it shows only the follow number.
My sheet number is 400:1
why dusn't show only the number 400 in the titleblock?
DimoSheetAsSheet
DimSheetNumberAsString
i = 1
ForEachoSheetInThisApplication.ActiveDocument.Sheets
SheetNumber = Left(oSheet.Name, InStr(1, oSheet.Name, ":")- 1)
MessageBox.Show(SheetNumber, oSheet.Name)
i=1+1
Next
AutoCad :: Automatically Place Number Block Onto Drawing?
Oct 4, 2013I have a number of areas numbered 1,2,3......etc but I need to change the text to the following where only the last number that is underlined is to increase sequentially.
P23/L2/1
Could Tcount be used or is there a modified version available?
If not is there a quick way to automatically place a number block onto a drawing with a click and then for every other click sequentially increases the last number.
AutoCad 2D :: Number Of Viewports And Editing Attributed Block?
Apr 21, 20111) Problem about viewports :
I am using 2011, I have created 17 viewports in one paper space, there are 2 viewports not showing anything. I deleted 2 viewports with content, then the 2 viewports which were not showing is now showing images.
I started a new drawing, drew something very simple for testing, I could create 63 viewports the 64th is not showing.
I would like to ask what it is to control/affect the number of viewports I can create in one paper space.
2) To Edit an Attributed Block
When double click an attributed block (command = eattedit), the dialog box "Enhanced Attribute Editor" disappeared !
AutoCAD Civil 3D :: Alignment Labels Not Displaying 2013?
Jan 15, 2013The major and minor station alignment labels keep disappearing in my drawing. I've had some luck by removing and re-adding the labels but this has stopped working. Is this an issue that will be resolved by Service Pack 1?
View 3 Replies View RelatedAutoCAD 2013 :: Displaying File Name On Plotted Drawings
Oct 3, 2012Any way to have the file name of a drawing printed somewhere on the drawing when plotting drawings?
View 5 Replies View RelatedAutoCAD 2013 :: Some Error In Displaying Dwg Preview While Loading
Apr 29, 2012While loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.
View 6 Replies View RelatedAutoCAD 2013 :: Displaying Chinese Character On DWG Files
Nov 19, 2012I am currently in urgent need to open an autocad file (.dwg) that has Chinese characters in it, but no matter I tried to download many different .shx fonts I still couldn't get it displayed.
I tried to talk with the maker of the file, but for some reason and addition with my poor Chinese language, I cannot get him understood what I need him to do (send me the .shx files). I am attaching the .dwg file.
AutoCAD Map 3D :: 2013 Labels Not Displaying When Plotting / Exporting
Jun 27, 2013I've searched this Discussion Groups area on the site and have found a couple solutions. I've tried them all but I can't seem to figure out how to get ALL of my labels to display when I plot or when I export to PDF. It seems that only the POLES layer labels are having trouble showing up...
I understand scaling and it doesn't seem to be the issue. I've tried plotting under different scales, and I still get the same thing.I've attached an image showing the outcome.
On the left is the PRINT PREVIEW in AutoCAD.
On the right is the EXPORTED PDF.
I've checked in the administrator under POLE LABELS, and changed a couple things around but I can't seem to get the pole labels to show up.
AutoCAD 2013 :: Command Line Not Displaying All Information?
Mar 14, 2013When programming in Autolisp, I like to view the values set to my variables so you type an exclamation point followed by the variable name on the command line to have it display the value. My command line will not display the value. I have to hit the F2 key to bring up the text window to view it. how to get the command line to view this information? We have other computers that show it, but mine will not.
View 9 Replies View RelatedAutoCAD 2013 :: Possible Options For Displaying 3D Geology Models
May 22, 2013I'm trying to explore possible options for displaying 3D geology models. In the attached I want to chop out the yellow solid and leave the other solids "as is" to reveal the various strata when the yellow solid is removed. I have removed the yellow solid but the results are not quite what I was hoping for.
View 6 Replies View RelatedAutoCAD 2013 :: Drawing Displaying Origin With XYZ Seems Dimmed
Aug 19, 2013I have a drawing that is displaying the origin with XYZ and the drawing seems dimmed. It also is running very slow. I feel like I've gotten into an editing mode and was unaware. I've tried chanding views and UCS. When I open other drawings things are normal and faster.
View 5 Replies View Related