I have a drawing that is displaying the origin with XYZ and the drawing seems dimmed. It also is running very slow. I feel like I've gotten into an editing mode and was unaware. I've tried chanding views and UCS. When I open other drawings things are normal and faster.
View 5 RepliesGreetings, frequently I need to identify the origin of a previously applied custom hatch pattern for use in a different area of the same drawing, is there a way to have the origin displayed and/or view its coordinates in 2009LT?
I had hoped that I could select multiple hatched areas & view their orgin points through "properties" & verify that the points of origin all align (in either the x or y axis), but this doesnt seem to be the case.
I need to identify the origin of a previously applied custom hatch pattern for use in a different area of the same drawing, is there a way to have the origin displayed and/or view its coordinates in 2009LT?
I had hoped that I could select multiple hatched areas & view their orgin points through "properties" & verify that the points of origin all align (in either the x or y axis), but this doesnt seem to be the case.
Ideally, I'd like to draw a line or circle from the origin of the original hatch
I have an operator here who has an XREF that he brought in and it did not line up as it should with the remainder of the drawing. He then went in to the drawing being XREF'ed and reset the origin so that it would line up properly. When he did so, the XREF did move but no to where he set the origin. The XREF is still showing the insertion point some place other than where he has the origin set on his XREF'ed drawing.
View 6 Replies View Relatedthe instant it's inserted into a drawing? And why the drawing scale and origin appear to jump around while I'm in block editing mode? AutoCAD recovery could find no errors.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I cannot select origin to constrain sketch with dimension to origin?
I selected Sketch,
expanded origin,
selected mywork plan (xy)
drew rectangle,
input dims,
right click for marking menu,
selected dimensions,
Origin is yellow,
cannot select it and then edge of rect to set dim that will center sketch on origin? Just like the videos show, but cannot select origin>
I noticed that relative coordinates are not working in UCS Origin in Autocad 2013.
I used to create an UCS according to a mesh of coordinates (North/East). To do that I first aligned the UCS to the North axis and point the origin to known coordinates (this part is working). Then I created a new UCS using relative coordinates, like "non @ -286200,-7485500".
This relative coordinates entry are not working anymore in this version of Autocad (2013).
When printing to our Xerox work center 35, I choose 11x17, extents, fit to paper, landscape. The preview shows the entire template page just as i want it. The printout has the left side of template shifted over to the right approx 5.5 inches. It is as if i changed the plot offset 5.5 inches.
View 1 Replies View RelatedWe are just in the process of upgrading to Inventor 2013. While migrating our iParts, the origin work planes from the part part suddenly appear in some of the children. In the browser they show up under the iPart parent entry and will have names such as "YZ Plane_1". The visibility of all of the origin work features in the parent are turned off. In the children I can right click on these work planes but there is no option to turn off their visibility. And of course I can't even turn off general categories of object visibility in the children because that function is greyed out.
Is this behavior normal/new in IV 2013? Is there anyway I can turn off these origin planes in the iPart children?
I have created a pipe network and am now creating an alignment and profile from that network. I follow the steps outlined in help file and when I get to "Select profile view origin" C3D freezes. I can invoke the Task Manager and choose to end C3D, then cancel when prompted to save file and control is returned. But no profile is created. Is it a video card issue maybe?
Seems like it is creating the alignment but freezes before the profile is created - In Prospector there are aligments in the misc category from multiple tries but no profiles associated with them. When it occurs I can't zoom or pan in C3D but I can switch to another app.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
I have a AutoCAD MAP drawing with the pipe size assigned as object data to various lines in the drawing.
Is it possible to display the pipe sizes as a text entity parallel to the line? How would I go about doing this. First prize would be if the value of the text changed whenever the object data is changed.
Is there a way to display and control the visibility of property set data next to a tag or object in model space?
For example, imagine a floor plan such as a large hotel with a lot of doors. It would be nice to be able to look at the plan and see which doors have had their property sets filled out and which ones have not; and, it would be great if the visibility of the property set data could be toggled on and off so as not to clutter up the drawing when not needed.
I'm having an issue with some of my drawings where the all the lineweights appear much too thick on the screen. When I plot the drawing or look at a print preview the lineweights appear correct, but in model space they appear much too thick.
I found the option to show / hide lineweights, and when I toggle this option from show to hide it seemingly fixes the issue, but when I pan or zoom on the drawing the think lineweights come back.
Why this is happening, even with show lineweights enabled they should not be displaying this thick as every line on the drawing is default lineweight, and the default is set at 0.25mm, I have the exact settings on different drawings but they dont have this display issue.
I am displaying dual units in a drawing with primary units being Customary. The metric unit displayed is incorrect.
View 1 Replies View RelatedThey have one file xrefed into another but the text is not showing up. It is a block and the text is an attribute - but it is exploded.
I have attached 2 images - the first one - of the original file the second - where it is xrefed into another file with the text missing.
I am having trouble with getting the quick properties box to display. I have turned the feature on at the bottom taskbar, and tried Ctrl+Shift+P, and changed settings so that it displays to the top-right of the cursor, but I get nothing when I select any object. It used to work on 2012 but not now.
View 8 Replies View RelatedI was wondering if there is a setting somewhere that can be turned on to display the manual points I am creating as I create them instead of having to go back and update the point group before they display in the drawing?
View 1 Replies View RelatedIn Civil 3D 2012, if you enable the option of "Display full path in title" under the Options --> Open and Save --> File Open area, the active drawing name and path displayed in the Tittlebar is not correct?
I've noticed this when the drawing window is maximized, didn't check when restored. Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1
In block attribute manager i can see the number of instances of the selected block in the current drawing. Can I set this value in the field?
View 4 Replies View RelatedThe major and minor station alignment labels keep disappearing in my drawing. I've had some luck by removing and re-adding the labels but this has stopped working. Is this an issue that will be resolved by Service Pack 1?
View 3 Replies View RelatedAny way to have the file name of a drawing printed somewhere on the drawing when plotting drawings?
View 5 Replies View RelatedWhile loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.
View 6 Replies View RelatedI am currently in urgent need to open an autocad file (.dwg) that has Chinese characters in it, but no matter I tried to download many different .shx fonts I still couldn't get it displayed.
I tried to talk with the maker of the file, but for some reason and addition with my poor Chinese language, I cannot get him understood what I need him to do (send me the .shx files). I am attaching the .dwg file.
I've searched this Discussion Groups area on the site and have found a couple solutions. I've tried them all but I can't seem to figure out how to get ALL of my labels to display when I plot or when I export to PDF. It seems that only the POLES layer labels are having trouble showing up...
I understand scaling and it doesn't seem to be the issue. I've tried plotting under different scales, and I still get the same thing.I've attached an image showing the outcome.
On the left is the PRINT PREVIEW in AutoCAD.
On the right is the EXPORTED PDF.
I've checked in the administrator under POLE LABELS, and changed a couple things around but I can't seem to get the pole labels to show up.
When programming in Autolisp, I like to view the values set to my variables so you type an exclamation point followed by the variable name on the command line to have it display the value. My command line will not display the value. I have to hit the F2 key to bring up the text window to view it. how to get the command line to view this information? We have other computers that show it, but mine will not.
View 9 Replies View RelatedI'm trying to explore possible options for displaying 3D geology models. In the attached I want to chop out the yellow solid and leave the other solids "as is" to reveal the various strata when the yellow solid is removed. I have removed the yellow solid but the results are not quite what I was hoping for.
View 6 Replies View RelatedI'm finding a problem with solid fill, drawn in model space its fine, but viewed through a viewport and all I see is the outline of it in wireframe.
I'm not having this problem on other drawings, it's limited to this file, but a colleague has also had as well it so not my workstation. This narrows it down to this specific drawing being the problem.
As regards variables, FILL = 1, FILLMODE=1.
It is just solid objects with the problem, polylines with a width display OK as does fill text.
Measure Tool Not Displaying Results In Autocad 2013 Mac
View 4 Replies View RelatedI am editing a drawing i have inherited from the previous drafter who is no longer working here. this drawing references 2 other drawings. one is the title block, the other is the engineering drawing. both of these drawings have white objects in them, namely, some text and some solid hatching.
Instead ot those white objects appearing as white in this drawing, they are appearing as a grey colour. i have double and triple checked that these objects are coloured by layer and the layer is white in both of the xrefs. they appear white in the xrefs but not in the final drawing.
since we are using colour dependent line weights in our printing, i would like to get this colour problem sorted.
I have imported an IGES file in Inventor and I need to dimension and detaill the piece in a 2D drawing. The thread and hole wizard does not recognize the holes in the workpiece as holes. Also I sectional view does not display hatched areas of the workpiece even though I have the display option checked on. Is there any sort of feature recognition within Inventor that I can use to import all geometry so that inventor understands?
I am working with 2011 Pro and have about 1500 hours on the program so far.
I was considering redrawing the workpiece by creating a part within an assembly and overlaying the two pieces on top another and using refernece geometry but this might not be the most ideal method.
how to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
This is the field for file name (drawing number)
%<AcVar Filename f "%fn7">%
Any way to adjust this to add or subtract one?