AutoCAD 2010 :: Drawing Lineweights Not Displaying Properly
Oct 31, 2013
I'm having an issue with some of my drawings where the all the lineweights appear much too thick on the screen. When I plot the drawing or look at a print preview the lineweights appear correct, but in model space they appear much too thick.
I found the option to show / hide lineweights, and when I toggle this option from show to hide it seemingly fixes the issue, but when I pan or zoom on the drawing the think lineweights come back.
Why this is happening, even with show lineweights enabled they should not be displaying this thick as every line on the drawing is default lineweight, and the default is set at 0.25mm, I have the exact settings on different drawings but they dont have this display issue.
I can't see the means by which I can plot proper lineweights to my laserjet. And when I try to plot to pdf file I get the line colors instead of a weighted line.
How do I set up my drawing for correct monchromatic lineweights ?
I have imported an IGES file in Inventor and I need to dimension and detaill the piece in a 2D drawing. The thread and hole wizard does not recognize the holes in the workpiece as holes. Also I sectional view does not display hatched areas of the workpiece even though I have the display option checked on. Is there any sort of feature recognition within Inventor that I can use to import all geometry so that inventor understands?
I am working with 2011 Pro and have about 1500 hours on the program so far.
I was considering redrawing the workpiece by creating a part within an assembly and overlaying the two pieces on top another and using refernece geometry but this might not be the most ideal method.
how to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
I have LT08 and have one drawing using linestyles and colors to determine lineweight for plotting that just will not plot anything other than a "light" lineweight. I have tried making an all new .cbt, existing .cbt's, changing ALL colors to a heavier weight etc. Nothing is working.
Plot preview is light lineweight, plotting to pdf is light and plotting to the plotter is light. I am not having this problem with any other drawings so there must be something set somewhere in this one file. I did not create the model. Someone else did but I did setup the layout sheet, just like I do other drawings.
We use linestyles for utilities such as w for water, s for sewer etc. linestyles look like --w--w--w--w--. in Autocod 2004, if you reverse direction of line or rotate line 180 degrees drawn with this linestyle, the w's would look like m's because text reversed with line (this is what i want to happen) in Autocad 2012 and 2013, when i draw a line with the same linestyle, the text will not reverse, even if i manually rotate the line 180 degrees, the w still reads w and not m. is this a system variable, mirrtext did not work.
I'm wondering if there's a way to change/add to the list of available lineweights in the dropdown lists in the layer manager. I want to have a thickness of 0.125", but that isn't available. I found that if I issue the STYLESMANAGER command, I can edit lineweights in existing .ctb/.stb files, but I don't know now to transfer that to be available in an existing drawing. Can I just assign a ctb/stb style to my drawing?
It appears that once I bring in an xref from another firm, I cannot not get it to display properly on screen. It was working on a previous drawing and now it doesn't. I know this explaination isn't very clear so I have attached two files that are print screens of my model space and my paperspace.
Am configuring many page setups and when printing/plotting there is a checkbox to scale lineweights. Was wondering what the consensus is on this. Should the check scale line weights box be checked, or not?
If Inventor is on the screen when the pc locks (win+L) Inventor will not display properly after unocking the pc. Moving the mouse around will change what is highlighted in the feature tree and things like that, but I cannot at all see the actual object I am working on. Changing from one open component to another does not work. I have to restart each time this happens. I have updated both Inventor and my display drivers to a supported version.
I was working with ilogic, Adding a new rule and all of a sudden I got an error and when I double click on a parameter to add it to the code, the format changed.
It used to look like this when I added a parameter: Parameter("vertical seperation:1", "partitionthickness") but now when I double click on a parameter I get this: vertical seperation.ipt.partitionthickness
Also when I right click on a parameter and select display current state, It does the same thing, for some reason the code does not display like it used to.
I got an error when this first happened and I tried reproduce the error again but it did not appear again. This affected all my parts and even in different projects.
I re installed inventor because I thought there might be a file link broken but it did not fix it.
I have a rather odd situation. I have input a small table of survey points (we don't have access to a data collector, so it had to be manual).
I have a properly located and back-sited setup, with all of the points located in 3 dimensions.
The Northing/Easting/Elevation data is calculated and displayed for all of the points in the "observations" table accurately.
Every point has the same display/labeling properties/settings, but only 2 points properly display the elevation as calculated.
The problem seems to be that the points aren't accurately retrieving the Elevation from the table.
For some reason, in the “Properties” dialogue for the points that display properly, the “Point Elevation” field actually contains a number; whereas the points that don’t, the same field reads “*PROPERTY NOT SET*”.
This makes no sense, because in the table that defines the points, the elevation is accurate for all of the points, and I can’t find a difference in the table- or in the point properties- between the correctly displayed points, and the ones that are missing the elevation label.
Today I created a TIN Volume Surface. The volume surface seems to have a "resolution" issue if you will when displaying using elevation banding. In the attached screenshot note how the edges of the surface are "squared" or pixelated. Also, the blue lines are "hide" boundaries, and they have the same effect. I've created volume surfaces before with no issues until now.
The volume surface compares 2 surfaces that were created from nothing but contours. Some of the contours can be seen in the attached image.
I've tried REDRAW and REGEN, the image looks the same in model space and paper space, I've tried closing AutoCAD and reopening the file. I deleted the volume surface and then created a new one... I'm sure there's just a setting somewhere that I'm missing.
For comparison, also attached is a screenshot a "normal" volume surface that I created before. This one has no "hide" boundaries, but the edges of the surface aren't "squared."
in Inventor I use my own library with different layers, font types, colors, lineweights etc. In Inventor drawing it works well. But after exporting to DWG only colors of different layers stay the same; all fonts, lineweights change to one (maybe some kind of default) font, lineweight.
How could I repair that, I need drawing in DWG to look like the same as in Inventor. I have tried to use "Configuration" in DWG file exporting option and I have created my own configuration, but it did not work... I simply do not understand how it works. If the "Configuration" in DWG file exporting option is the clue -
Really big scene. 17 Million polys. First of all...17 million is not displaying correctly. (See image) There is an extra digit at the end.Second, when I select an object, (since 17 million takes up so many spaces) I can't properly read the poly count on my selected object.
Any way to change the spacing or size of the font?
I am using Adobe Photoshop CS3. I have a spreadsheet of Greek translations. When I copy and paste the text into Photoshop, certain characters are missed out or replaced with an incorrect one. I have tried downloading fonts that support the Greek character set, but still no luck. If I paste this text into any other applications (Word, explorer etc) the text displays properly. I was wandering if there is a setting or anything in photoshop that I need to change?
I've created a .png logo but when it displays on the website, it doesn't look clear. Do i need to change settings when exporting it? The site is [URL] and il upload the logo.
I need to access certain unicode characters (namely the x/8 fractions). I have the appropriate font installed, and the characters display in every other program on the machine, but they are not displaying correctly in Illustrator. If I type the characters in using alt codes, the 3/8 character displays as "", the 1/8 character displays as "[", etc. Is there some setting I need to change to enable support for Unicode characters?
If I type the character in another program, copy it, and paste it into Illustrator, it shows up as a box with an X through it. If I highlight the box and change the font to one that supports the character, then the character does display correctly. Is there a way to type the character directly into Illustrator?
I am runing LR 5.3 and PS6 on Win 7 Ultimate with latest updates as of 2/17/2014. Some of my DNG from the Pentax K5 IIs are not importing or displaying correctly. I have attached screenshots from LR/PS and Silkypix (Pentax Util) for comparison.
I got calls from 3 of the DRAW users that some of the fonts are not displaying correctly since they have updated their Windows today. I have not yet connected my laptop to internet. Shall check it and try to identify the culprit update.Few fonts known for not displaying correctly since today.
I have a AutoCAD MAP drawing with the pipe size assigned as object data to various lines in the drawing.
Is it possible to display the pipe sizes as a text entity parallel to the line? How would I go about doing this. First prize would be if the value of the text changed whenever the object data is changed.
I need a way to properly scale a drawing that I've pulled into AC..
Example, I get a drawing for customer in PDF that I have to trace into AC. Said PDF is marked 1/4 = 1. Up to this point I've been guessing at accuracy by measuring doors to 3'. I know this cannot be the prefered way
Is there a way to display and control the visibility of property set data next to a tag or object in model space?
For example, imagine a floor plan such as a large hotel with a lot of doors. It would be nice to be able to look at the plan and see which doors have had their property sets filled out and which ones have not; and, it would be great if the visibility of the property set data could be toggled on and off so as not to clutter up the drawing when not needed.
I have a drawing that is displaying the origin with XYZ and the drawing seems dimmed. It also is running very slow. I feel like I've gotten into an editing mode and was unaware. I've tried chanding views and UCS. When I open other drawings things are normal and faster.
When opening AutoCAD 2010, I get an error message "Unable to load profile...". This happened unexplicably. I have been using AutoCAD several months with no problems. One annoying consequence is that dialog boxes do not display. For example, running DIMSTYLE does not open the Dimension Style dialog box; instead, a list of options such as ANnotative, Save, and Restore appears. How do I get back to normal?
I have loaded in some cuix files in LT 2010. They have appeared in the customisation area and in the current Workspace and I have turned on the menus I require and no error is returnned, however when I go to the drawing screen none of the customised menus or ribbon tabs have appeared. I have performed an Autocad LT repair and also a reinstall from the add/remove programs and I have also tried a different .CUIX file but still no luck.
I was wondering if there is a setting somewhere that can be turned on to display the manual points I am creating as I create them instead of having to go back and update the point group before they display in the drawing?
In Civil 3D 2012, if you enable the option of "Display full path in title" under the Options --> Open and Save --> File Open area, the active drawing name and path displayed in the Tittlebar is not correct?
I've noticed this when the drawing window is maximized, didn't check when restored. Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1
