In Civil 3D 2012, if you enable the option of "Display full path in title" under the Options --> Open and Save --> File Open area, the active drawing name and path displayed in the Tittlebar is not correct?
I've noticed this when the drawing window is maximized, didn't check when restored. Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1
I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...
Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...
I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.
When I choose Open Drawing and the window pops up, it would be nice if the full path name of the file showed up on the bar where it shows the file name (see attachment). As it is I can't tell if this file is on my c drive or my back-up drive.
The individual drawings show the full path name once they're open, can the same be achieved with the Open Drawing window?
A co-worker asked how to display the full drawing path in the window header. He said that it used to, now doesn't. I have never seen the full path of the drawing in the header before. Mine just says "AutoCAD Civil 3D 2013 (Drawing File Name) [Project Folder]"
I checked in Options, but didn't see anything.
Any variables that would cause my XREF paths to change from Full Path to Relative Path when I save a drawing?
This is something that just started happening recently and has me completely at a loss. I haven't installed any patches or hot fixes recently and nothing else has changed that I'm aware of.
I am using Paint Shop Pro X5 Ultimate.The Preview Window of the Manage Tab seemed to be displaying photos oddly - the photo wasn't filling the preview window (it was leaving an area around the bottom and right-hand side of the photo). At first I thought it was just the zoom setting, so I zoomed in. However, I have now used several features of the software that seem to show that the Preview Window (only on the Manage Tab) is incorrectly displaying the preview.
The problem became further evident when I used the Find People feature of Paint Shop Pro to locate the faces and tag several people, however the position of the tags are as if the Preview Window is filled by the photo. I have attached a screenshot that shows that the tag for the person in the bottom right-hand corner of the photo has her tag positioned off the photo (outside of the border of the photo) to the bottom and right of the photo even though it was automatically placed by the software. The position of the tags for the people in the photo are all offset slightly to the right and down and would be correct only if the photo was displaying correctly in the Preview Window.
I have tested uploading the photos to Facebook and the tags appear correctly once on Facebook. If I manually tag the faces as they appear on the Preview Window, the tags are incorrectly placed once the photo has been uploaded to Facebook (they appear up and to the left of where the face is positioned in the photo.
I have tried resetting the preferences and turning off some display features of Microsoft Windows, but I have seen to changes in the Preview Window.
Properties of your source files (format, file size, where did you get it?) The example photo was taken in .jpg format using a Nikon D3100 and 18-200mm Nikon DX lens, though this affects my entire photo collection taken on several different cameras and in several different formats (including RAW).
What devices are involved and their mode of connection? The files were transferred directly from the camera to the computer using a USB cable. Project Properties:I was using the Manage tab to sort photos and tag people using the Find People feature and also tried manually tagging faces.
I was wondering if there is a setting somewhere that can be turned on to display the manual points I am creating as I create them instead of having to go back and update the point group before they display in the drawing?
View 1 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedI have a base drawing with all my pipe networks data referenced in. When I xref this drawing into out drawings some of the pipe styles and structure styles are displaying differently than in the base file. Both drawings have same parts lists and styles.
View 8 Replies View RelatedIs there a way to link the path of the survey data base in the drawing, so I do not have to set the working folder every time?
View 9 Replies View RelatedWhen I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I've got an issue with Adobe CS3 illustrator not displaying the full UI when used via Microsoft Remote Applications (RDS Windows Server 2008 R2). When connect to the server via a normal RDP interface the connection UI is displayed correctly. The Other Adobe CS3 MC application work fine in either connection method.
I have logged a call with MS and we have tried a varierty of RDS Fixes however we do seem pointing to a illustrator issue over a RDS issue.
In the code below, the "oLibraryPath.Path" returns: .Library. How can I get the full path?
Dim oLibraryPath As ProjectPathFor Each oLibraryPath In oLibraryPaths Dim oDirs() As String = Directory.GetDirectories(oLibraryPath.Path)Next oLibraryPath
below is a portion of a profile i am working that shows the bottom of the catch basins not at the correct elevation the correct elevation is at the pipe invert the dashed line by checking the structure properties the cb are at the inverts are correct but the actual drawing is not shown correctly.
View 9 Replies View RelatedI noticed today that the orifice rating curve for orifices is being calculated incorrectly in SSA. The head is being calculated to the orifice invert instead of to the orifice centerline. This probably has a minor (or no) effect if tailwater conditions are present
View 3 Replies View Relatedhow do I show the full name (path and all) at the top of the Acad dwg?
View 3 Replies View RelatedIs there a way to make sure whenever I x-ref a file it is not saved as "full path"? I prefer that be the default as I never x-ref outside of the folder I am working in.
View 1 Replies View RelatedAfter upgrading from 2013 to 2014 we have a few drawings that had profiles created in 2013 and now when we open the drawing in 2014 the profile view disappears and so we regen and then we get a fatal error. I ran an audit and there are no errors, I re-sycronized the surfaces, i also ran an audit on all the xreferences.
View 1 Replies View RelatedWe are having an issue with profile grid shooting off to the left of 0+00 rather than starting at 0+00 and stopping at the end of the profile. There is nothing in the settings that I can find that is telling the grid to extend close to 2000' to the left. Three of the four profiles are doing this. One of them displays correctly, but there are no differences that we can find in the settings.
View 7 Replies View RelatedI like to have the path display in the title bar at the top of the screen. I check the box to display it in options. It works! But the text is almost illegible in the title bar. The title bar is black, the text is black with some cloudy grey background. It is impossible to read. I can't seem to find anyplace to change it's appearance either.
View 4 Replies View RelatedNoticed this in R2013? Not bothering to check with 2014 yet as I don't really use it.I have three vports. TL is Profile view, TR is SV and other is 3d.
There seems to be slight difference between the pipes in the profile/sections compared with the Structure pipe crossing.
All styles are set for External walls, when swapped to internal this is still incorrect. All pipes are same size & part and are Horizontal. Sections / alignment is taken along centre of pipework.
Using part builder, I created a new pipe part for an odd-sized CMP arch pipe. In plan view, the pipe looks good. At first glance, I thought the pipe was drawn correctly in a profile view, but I realized that the pipe was displayed with the invert located at the wrong place in the profile view. I thought this was because the insertion point of the new pipe part that I had made was placed at the incorrect location in part builder.
So, I swapped out the incorrect pipe size for another one that I knew was correct, and then deleted the incorrect pipe from the pipe parts list, and went back to part builder, and placed the insertion point at the invert of the pipe; then saved the edited pipe part, ran partcatalogregen, added the "corrected" pipe part to the pipe parts list and swapped in the new corrected pipe size to the pipe network. However, the pipe still displays incorrrectly on the profile view.
The pipe data is correct in the pipe properties: the invert is stated to be located at elevation 20. The overall height of the pipe , 38" (3.1667') is correctly displayed on the profile view. But the actual location of the pipe invert is not shown at the correct location, elevation 20, on the profile view.
Object - Path - Join dialog box asking if smooth or corner path is not showing up in CS5. How to get it bac/activate it?
View 5 Replies View RelatedI have a AutoCAD MAP drawing with the pipe size assigned as object data to various lines in the drawing.
Is it possible to display the pipe sizes as a text entity parallel to the line? How would I go about doing this. First prize would be if the value of the text changed whenever the object data is changed.
how to make text run in a complete circle, Photoshop seems to only do it in a semi circle.
View 1 Replies View RelatedIs there a way to display and control the visibility of property set data next to a tag or object in model space?
For example, imagine a floor plan such as a large hotel with a lot of doors. It would be nice to be able to look at the plan and see which doors have had their property sets filled out and which ones have not; and, it would be great if the visibility of the property set data could be toggled on and off so as not to clutter up the drawing when not needed.
I'm having an issue with some of my drawings where the all the lineweights appear much too thick on the screen. When I plot the drawing or look at a print preview the lineweights appear correct, but in model space they appear much too thick.
I found the option to show / hide lineweights, and when I toggle this option from show to hide it seemingly fixes the issue, but when I pan or zoom on the drawing the think lineweights come back.
Why this is happening, even with show lineweights enabled they should not be displaying this thick as every line on the drawing is default lineweight, and the default is set at 0.25mm, I have the exact settings on different drawings but they dont have this display issue.
I have a drawing that is displaying the origin with XYZ and the drawing seems dimmed. It also is running very slow. I feel like I've gotten into an editing mode and was unaware. I've tried chanding views and UCS. When I open other drawings things are normal and faster.
View 5 Replies View Related