AutoCAD Civil 3D :: Change Data Reference Path In Current Drawing
Jul 12, 2012
i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 2 Replies
ADVERTISEMENT
Sep 24, 2011
I attach x-ref in one of the drawing......and then next day i open drawing is show but xref does not not show and i gives that message..............
Error: Possible circular reference to current drawing. *Invalid*
what should i do?
View 1 Replies
View Related
Nov 28, 2012
I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
View 1 Replies
View Related
Sep 18, 2013
I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
View 6 Replies
View Related
Apr 29, 2011
I am using vb.net and I need to find the directory path that my current or open drawing is located in. I'm not sure how to get this from vb.net.
View 4 Replies
View Related
Jul 28, 2011
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
View 1 Replies
View Related
Dec 21, 2010
When creating my plan set, I need to data reference pipe networks into other drawings than that in which they were designed to show crossings in profile views or to separate out profiles into managable drawings. When I do this, if I have swapped a type-13 inlet for a 10' type R inlet or something during design, the data referenced pipe network will replace the 10' type R with a default inlet. Also if I have swapped a proposed 30" pipe for an existing 30" that have different styles, the data referenced pipe network will revert back to the proposed 30" pipe. how to make a data referenced pipe network reflect what is currently in the design drawing?
View 9 Replies
View Related
May 19, 2012
I have a series of drawings created in AutoCad Electricla 2012.
Each drawing has a raster image attached with a path from a different computer.
When I try to edit the drawing or re-reference the iamge path, the program crashes.
I've tried saving the drawings down to an earlier version 2007/2010.
View 2 Replies
View Related
Dec 6, 2012
Autocad 2013 Data Extraction works if I do not include attached xrefs and set it to "Select objects in current drawing". When I check "Extract objects from xrefs"; and go to next it processes for a bit then stays on page 2 of 8 on the Define Data Source page. Also have the same error if I choose " Drawings/Sheet set" with or without the xref objects included.
View 3 Replies
View Related
Dec 11, 2013
Does the source file size impact the functionality of a surface data reference?
Case 1 I have a source dwg that has a single surface, Surface A, in it and is an overall small file size.
Case 2 I have a source dwg that has Surface A as well as another 10 surface and the file size is HUGE.
When I data reference out Surface A from Case 1 versus Case 2 does the new drawing look back at the entire drawing or just the surface data to make sure the surface is up-to-date when syncing?
View 6 Replies
View Related
May 4, 2012
I was so excited to hear about the new pressure pipe networks that I had to get into the software. What I have found is both promising, and a little bewildering. The promising aspects are that the pressure pipes appear to act and function effectively, and in a manner consistent with real world design that is easy to understand and use. Kudos to Autodesk!
That being said, I do have a couple of complaints. First, the pre-loaded fitting and appurtenance libraries are very limited when it comes to sizes and materials that are more commonly found in the land development arena I work in (8" PVC is our bread and butter). Hopefully, additional resources are forthcoming - they usually are.
Second, and more importantly, I can't figure out a way to data reference a pressure pipe network. If we can't data reference the pressure pipe network, then we really can't use them at all, which would be very disappointing.
View 4 Replies
View Related
Feb 21, 2013
I have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies
View Related
Oct 24, 2007
is there a way to stop the synchronization at the start? i would like to synchoronze manually later.
any system variables?
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 8 Replies
View Related
Apr 5, 2012
i want to delete unwanted reference file (xref) information outside boundary of a current drawing.using civil 3D or autocad.
View 1 Replies
View Related
Oct 29, 2013
A method (possible expressions) to create a profile view label that can reference pipe or structure data?
View 5 Replies
View Related
Jul 10, 2013
my colleague that is on holidays right now sent some civil 3d drawings that contain data references to another office and they are having broken reference issues with the surfaces. I opened the drawing in our office and the surfaces are there and showing the data ref symbols in prospector but when i look through the data shortcuts folder below in prospector the surfaces are not there.
how do i locate the .xml files or if they have been deleted how do these surfaces appear in my drawing.
View 9 Replies
View Related
Oct 31, 2012
I've just used Data Shortcuts for the first time but I've found that I can only reference in Surfaces and Alignments. Is this correct? The file I am creating my model in, has Corridors/Feature Lines/Gradings as well but I can't create Data Shortcuts for these? or am I missing something?
View 9 Replies
View Related
Jun 28, 2013
I have a major error currently affecting my work that I need to resolve ASAP. I'm using C3D 2012 64 bit with Windows 7. I have multiple model drawings that I have created pipe networks and view frame groups in, and using those model drawings I have created plan and profile sheets from the view frames. I created data shortcuts of all my pipe networks and referenced the pipe networks into my sheet drawings. In the sheet drawings I drew the network parts into the profiles, and everything displayed exactly as it was supposed to. No issues at all.
Now fast forward about a month. Out of the blue one day I open one of my sheet drawings to perform some edits and notice that the pipes that were previously displayed in the profile views showing inside and outside walls with the centerline turned off now show up as a simple line. I haven't changed any settings at all. I looked at the properties of the pipes, and they seem to have all ignored their asigned diameters- the pipe data in the referenced network now assumes all inverts & crowns are the same elevation as the centerline.
Long story short, I have gone so far as to completely reinstall the program and restart the drawings, but the more I edit the oringal network the worse the problem gets. Now all of my structures are attaching themselves to the surface profile instead of the pipes, and the entire network gets put onto my current layer rather than the layers I assign in the Create Pipe Network Reference dialog box.
It happens to any drawing I try to open on this network- even ones created by third parties that I haven't edited. And the problem resides in the drawing because anyone I send the drawings to has the same problem. It will even crash the entire program sometimes when they try to open my drawings.
Civil 3D 2012 SP3 - Windows 7 64 bit - Intel Core i3-2120 - 8 GB Memory
View 2 Replies
View Related
Jun 26, 2013
I am using Rel 2013 C3D
How do I remove excel data links from my Reference Manager (see attached image). What I have been doing is AutoCad erasing the graphics from my drawing but the link still remains in the xref manager window.
View 5 Replies
View Related
Nov 13, 2012
Civil 3D 2012. One structure in my pipe network is not following along when the network is data-referenced in to other plan drawings. The structure is present in the source drawing, and included in the network, along with the pipes that are connected to it. All other structures and pipes are operating fine.
View 3 Replies
View Related
Jul 12, 2013
I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.
When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.
Preview and pdf attached.
C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
View 2 Replies
View Related
Oct 10, 2013
What is causing my EG Data Reference Surface to disappear on screen and Profile goes to crap? I've noticed this twice on same project in separate drawings. If I go to Toolspace and synchronize then it appears back on screen.
First dwg: I created a Pump Station Site Plan and data referenced in my surface and pipe network. I save and close then reopen and EG is gone until I synchronize.
Second dwg: I created a Railroad Crossing Exhibit showing plan and profile. I data referenced in my surface and pipe network. Same thing...save, close, reopen and I have to synchronize it to have plan and profile to appear ok.
This isn't good when I have .dsd files that I typically plot my drawing package from. I sent multiple sets of drawings to the plotter and all my Pump Station Site Plans were missing the surface contours. For this sheet, I had to synchronize and send separate plots just to have contours appear.
View 5 Replies
View Related
Jan 8, 2013
I have been trying to use the tcase command to change text case on a current drawing. some of the text is listed in properties with :A1 and various other squares and ( etc .). Any way to change this text. When I try exploding it and changing to mtext the fractions and all parts of the text is exploded as well.
View 9 Replies
View Related
Feb 2, 2013
In solidworks, if I have several similar parts to draw, I can draw one part and annotate it and then to save time and effort I can save the drawing as one of the other parts and then change the part reference in the drawing as I open it up.
View 7 Replies
View Related
Dec 26, 2013
I did some digging and found the option to replace a model reference in an entire drawing, but I'm looking to change the reference in just a view. Consider the picture I have attached. I'm depicting top down views of these layers. Each layer requires changing the view identifier each time I drop a view. This would be considerably less time consuming if I could just copy/paste the view and change which part file it was pointing to.
View 2 Replies
View Related
Sep 6, 2013
I have some storm sewer alignments that I've put into profiles in C3D 2011. The pipe network that I used to create the alignments from is a reference created from a data shortcut. I've created profiles of these storm sewer alignments, and the station labels for the storm structures are displayed at question marks until I go into the structure properties for each structure and link it to the correct alignment.
The problem is that whenever I synchronize my data shortcuts because someone has updated something, all of the links in each structure to the alignments disappears and I am back to? for my stations in the profiles and I have to go go fix it again. how to keep this from breaking?
I do see this recent message [URL] that appears to be a similar problem, but it was said in that thread that this problem was introduced with C3D 2012, but I am using C3D 2011.....
View 4 Replies
View Related
Sep 18, 2012
I want to be able to repath a data shortcut I have on my drawing to a file thats on my C: drive, how do I do this? Its just for this one drawing I want to do it with, so the Data Shortcuts Editor is no good to me.
View 4 Replies
View Related
Jul 27, 2012
I know you can "pull" styles from a drawing (maybe the template) into your current drawing.
Is there a way to "push" them from the current drawing to another on?
Here is what I am picturing:
Right click on a style on the settings tab and choose "Send to Template"
"Template" would either be a predefined DWT file or it would open a standard file selection dialog to select one.....and this would copy the selected style into the template.
View 9 Replies
View Related
Sep 29, 2011
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies
View Related
Nov 6, 2012
I have a drawing when attached into another drawing, the coordinates have an exact 500,000 shift in the X value and an exact 200,000 shift in the Y value. Directely in the drawing, the coords are correct. They just won't attach correctly.
I can tell that this drawing was not created with the dwt we use (it is missing certain styles) - I wonder if the dwt could be to blame.
Also, I have been trying to figure the Map functions out with no guidance, I wonder if I somehow changed the attach settings to cause the shift.
AutoCAD Civil 3D 2012
Windows 7
64 bit
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
View 3 Replies
View Related
Feb 15, 2013
How do you move a survey database and data shortcuts? Without going into details, sometimes it is necessary to copy portion of projects as new projects. The survey database along with the drawings our surface, points, linework, etc. need to reference the new directory. I can set the survey database folder location to the new path but am not certain the information in the dwg is point to the correct location.
The same essentially applies to the data shortcuts. I'm having trouble getting this to work. With LD we were able to copy the project and resuscitate the drawing(s). I tried to use Data Shortcut Editor with the Saveas. I then attempted to rename the dwg's and path the new location and name but receive an error of Invalid source file. Correct the path or press Esc..
View 1 Replies
View Related
