AutoCAD Civil 3D :: How To Delete Unwanted Reference File Data

Apr 5, 2012

i want to delete unwanted reference file (xref) information outside boundary of a current drawing.using civil 3D or autocad.

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Can't Locate Surface Data Reference (XML) File

Jul 10, 2013

my colleague that is on holidays right now sent some civil 3d drawings that contain data references to another office and they are having broken reference issues with the surfaces. I opened the drawing in our office and the surfaces are there and showing the data ref symbols in prospector but when i look through the data shortcuts folder below in prospector the surfaces are not there.

how do i locate the .xml files or if they have been deleted how do these surfaces appear in my drawing.

View 9 Replies View Related

AutoCAD Civil 3D :: Structure Reference Alignment Not Holding In Data Reference

Nov 28, 2012

I have structures and alignments data referenced.  If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?

It seems like this worked in the past?

View 1 Replies View Related

AutoCAD Civil 3D :: How To Delete The Broken Surface Reference

Jul 19, 2007

I have got the ole Program Errors Dialogue back again. It seemed to stem from a rogue data shortcut that got broken.

I could not delete the broken surface reference, so had to create another data shortcut, create a reference and then I had the opportunity to delete the rogue surface and then the data shortcut.

Anyway, I got this error on Audit. (see image attached)

and this was the audit command line dump...

Command: audit

Fix any errors detected? [Yes/No] : y

Auditing Header

Auditing Tables

Auditing Entities Pass 1

Pass 1 100 objects audited

AcDbDictionary(8AB)
XData String Length 260 > 255
Truncate to 255
AcDbDictionary(8AB)

could not be repaired.

Pass 1 30600 objects audited

Auditing Entities Pass 2

[Code]...

I may have made an error by importing a data shortcut I didn't need in past weeks on this job. When a data shortcut is broken, it is quite hard to remove the reference.

Anyway, perhaps I just need to upgrade but I don't want to do it for this curent project as I am almost finished. (famous last words).

So what is causing this error that cannot be fixed? I didn't ask foran Xdata string to exceed 255 characters...

View 1 Replies View Related

Lightroom :: Delete Unwanted File Renaming Presets Used When Importing?

Jun 5, 2013

I've created a number of presets for renaming files when importing into Lightroom 4.4.  How do I get rid of presets that I no longer want? 

View 5 Replies View Related

AutoCAD Civil 3D :: Data Reference Process

Dec 11, 2013

Does the source file size impact the functionality of a surface data reference?

Case 1 I have a source dwg that has a single surface, Surface A, in it and is an overall small file size.
Case 2 I have a source dwg that has Surface A as well as another 10 surface and the file size is HUGE.

When I data reference out Surface A from Case 1 versus Case 2 does the new drawing look back at the entire drawing or just the surface data to make sure the surface is up-to-date when syncing?

View 6 Replies View Related

AutoCAD Civil 3D :: Pressure Pipe Data Reference

May 4, 2012

I was so excited to hear about the new pressure pipe networks that I had to get into the software.  What I have found is both promising, and a little bewildering.  The promising aspects are that the pressure pipes appear to act and function effectively, and in a manner consistent with real world design that is easy to understand and use.  Kudos to Autodesk!  

That being said, I do have a couple of complaints.  First, the pre-loaded fitting and appurtenance libraries are very limited when it comes to sizes and materials that are more commonly found in the land development arena I work in (8" PVC is our bread and butter).  Hopefully, additional resources are forthcoming - they usually are.

Second, and more importantly, I can't figure out a way to data reference a pressure pipe network. If we can't data reference the pressure pipe network, then we really can't use them at all, which would be very disappointing.

View 4 Replies View Related

AutoCAD Civil 3D :: Data Reference Surface Disappears

Feb 21, 2013

I have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Stop Synchronizing Data Reference

Oct 24, 2007

is there a way to stop the synchronization at the start? i would like to synchoronze manually later.

any system variables?

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 8 Replies View Related

AutoCAD Civil 3D :: Profile Label Reference To Pipe Data

Oct 29, 2013

A method (possible expressions) to create a profile view label that can reference pipe or structure data?

View 5 Replies View Related

AutoCAD Civil 3D :: Data Shortcuts - Only Reference In Surfaces And Alignments?

Oct 31, 2012

I've just used Data Shortcuts for the first time but I've found that I can only reference in Surfaces and Alignments.  Is this correct? The file I am creating my model in, has Corridors/Feature Lines/Gradings as well but I can't create Data Shortcuts for these? or am I missing something?

View 9 Replies View Related

AutoCAD Civil 3D :: Pipe Network Data Reference Error

Jun 28, 2013

I have a major error currently affecting my work that I need to resolve ASAP. I'm using C3D 2012 64 bit with Windows 7. I have multiple model drawings that I have created pipe networks and view frame groups in, and using those model drawings I have created plan and profile sheets from the view frames. I created data shortcuts of all my pipe networks and referenced the pipe networks into my sheet drawings. In the sheet drawings I drew the network parts into the profiles, and everything displayed exactly as it was supposed to. No issues at all.

Now fast forward about a month. Out of the blue one day I open one of my sheet drawings to perform some edits and notice that the pipes that were previously displayed in the profile views showing inside and outside walls with the centerline turned off now show up as a simple line. I haven't changed any settings at all. I looked at the properties of the pipes, and they seem to have all ignored their asigned diameters- the pipe data in the referenced network now assumes all inverts & crowns are the same elevation as the centerline.

Long story short, I have gone so far as to completely reinstall the program and restart the drawings, but the more I edit the oringal network the worse the problem gets. Now all of my structures are attaching themselves to the surface profile instead of the pipes, and the entire network gets put onto my current layer rather than the layers I assign in the Create Pipe Network Reference dialog box.

It happens to any drawing I try to open on this network- even ones created by third parties that I haven't edited. And the problem resides in the drawing because anyone I send the drawings to has the same problem. It will even crash the entire program sometimes when they try to open my drawings.

Civil 3D 2012 SP3 - Windows 7 64 bit - Intel Core i3-2120 - 8 GB Memory

View 2 Replies View Related

AutoCAD Civil 3D :: Change Data Reference Path In Current Drawing

Jul 12, 2012

i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.

if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.

They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.

one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 2 Replies View Related

AutoCAD Civil 3D :: Remove Excel Data Links From Reference Manager?

Jun 26, 2013

I am using Rel 2013 C3D

How do I remove excel data links from my Reference Manager (see attached image). What I have been doing is AutoCad erasing the graphics from my drawing but the link still remains in the xref manager window.

View 5 Replies View Related

AutoCAD Civil 3D :: Structure Missing From Pipe Network Data Reference?

Nov 13, 2012

Civil 3D 2012.  One structure in my pipe network is not following along when the network is data-referenced in to other plan drawings.  The structure is present in the source drawing, and included in the network, along with the pipes that are connected to it.  All other structures and pipes are operating fine. 

View 3 Replies View Related

AutoCAD Inventor :: Unwanted Data In Design Data Folder

Oct 12, 2011

I know that the xmls are very important in the design data folder and we shouldn't mess with them.What about the rest of the folders. I have around 11 folders. GOST, AEC Exchange, AIT, Cable & Harness, Bend Tables, DWG-DXF etc...

I need to know if any of these folders can be deleted? We don't use AEC Exchange, Cable Harness, BIm Exchange, Design Accelerator, Tube & Pipe.

What about the Optimisation, DXF-DWG.  I am not sure if I am using them unknowingly.Does this could be deleted? Is there a procedure to get rid of them.

View 1 Replies View Related

AutoCAD Civil 3D :: Print Doesn't Match Preview Alignment Data Reference

Jul 12, 2013

I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.

When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.

Preview and pdf attached.

C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD Civil 3D :: What Is Causing EG Data Reference Surface To Disappear On Screen And Profile

Oct 10, 2013

What is causing my EG Data Reference Surface to disappear on screen and Profile goes to crap?  I've noticed this twice on same project in separate drawings.  If I go to Toolspace and synchronize then it appears back on screen. 

First dwg:  I created a Pump Station Site Plan and data referenced in my surface and pipe network.  I save and close then reopen and EG is gone until I synchronize.

Second dwg:  I created a Railroad Crossing Exhibit showing plan and profile.  I data referenced in my surface and pipe network.  Same thing...save, close, reopen and I have to synchronize it to have plan and profile to appear ok.

This isn't good when I have .dsd files that I typically plot my drawing package from.  I sent multiple sets of drawings to the plotter and all my Pump Station Site Plans were missing the surface contours.  For this sheet, I had to synchronize and send separate plots just to have contours appear.

View 5 Replies View Related

AutoCAD Civil 3D :: Synchronizing Data Shortcuts Breaks Reference To Alignment In Profile Labels

Sep 6, 2013

I have some storm sewer alignments that I've put into profiles in C3D 2011.  The pipe network that I used to create the alignments from is a reference created from a data shortcut.   I've created profiles of these storm sewer alignments, and the station labels for the storm structures are displayed at question marks until I go into the structure properties for each structure and link it to the correct alignment.  

The problem is that whenever I synchronize my data shortcuts because someone has updated something, all of the links in each structure to the alignments disappears and I am back to? for my stations in the profiles and I have to go go fix it again. how to keep this from breaking?

I do see this recent message [URL]  that appears to be a similar problem, but it was said in that thread that this problem was introduced with C3D 2012, but I am using C3D 2011.....

View 4 Replies View Related

AutoCAD Map 3D :: How To Delete Index File For Point Cloud Data

Jul 16, 2013

I'm hoping this could be a quick fix without completely reinstalling CAD.

I jammed too much LiDAR data into my Index file for point cloud data, and now I can not even open it.  Even new drawings are trying to open the overall index with everything in it.

What I want to do is just delete the whole thing and start fresh again, but not sure how to do that.  If I could open it once I could start deleting stuff from it, but it is too large to even open.

View 1 Replies View Related

AutoCAD Civil 3D :: Combining Feature Data (Adding Data To Shape File)

Apr 24, 2012

I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.

Ultimately I will use the information to do a map query and find out spatially where i need new water meters.

Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.

I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?

Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?

Note: I am running c3d 2012 on a  Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go. 

View 3 Replies View Related

AutoCAD Civil 3D :: Relative File Location Reference For Point File

Apr 2, 2012

I have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute. 

View 5 Replies View Related

AutoCAD Civil 3D :: Data Reference Alignment Stationing Differs From Original Alignment

May 3, 2012

I using a data reference/shortcut to properly label an alignment in paperspace. However when I reference the alignment in and apply the labels the aren't the same as the original alignment that I am referencing. Is there a setting where I am supposed to apply a new beginning station.

Also it seems as though the stationing(distance) isn't even matching up 1:1 with the original drawing. For example in the original base drawing my alignment starts at 10+00 with the next PI at 14+76.98, but the stationing on the reference alignment starts at 0+83.33 with the very same PI being labeled as 1+23.08. So the very same distance is 476.98' in the real design and the drawing it's being referenced in, but the stationing of the referenced alignment shows it as 39.75 Units.

I've attached a screen of the beginning of the alignment.

Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM

View 5 Replies View Related

AutoCad 2D :: How To Delete Unwanted Layers

Jul 25, 2012

I have imported a dxf file from our Trimble handheld unit. The dxf has layers built into it that come straight from the trimble software. (ei, FENCE, TANK, WELL HEAD, FIELDLINE) I have custom built layers and linetypes for my .dwt file in Cad so I dont need the layers that followed the dxf file.

For some reason I am unable to delete those layers, I get a warning box saying:
The following layers cannot be deleted:

. layers 0 and Defpoints
. The current Layer.
. Layers containing objects.
. Xref-dependant layers

I am not on the current layer, I am pretty positive there is no objects on the layers I want to delete ( i have deleted my gps points and blocks that were imported)

I am not using any xref dwg's

View 9 Replies View Related

AutoCAD Inventor :: How To Delete Unwanted Geometry

Jan 28, 2013

I have generated a model but want to get rid of unwanted geometry to clean it up, how do I delete unwanted geometry?

View 4 Replies View Related

AutoCAD Inventor :: Delete Unwanted Styles?

May 31, 2013

In creating our drawing template, I collected alot of unwanted styles and want to delete/clean this up. I only want to keep what's highlighted..By the way, I found style editor and template creation quite tedious & convoluted.

Dell T3500
Intel Xenon CPU
15 MB RAM
64-bit operating system
NVIDIA Quadro 5000

View 3 Replies View Related

Lightroom :: Delete Preference File In C User Data Roaming Adobe

Jun 11, 2013

Every time I want ro start LR5 I have to delete the preference file in C User data Roaming adobe lightroom other wise LR5 just hangs at strt up screen. This is a right royal pain as it means I have to re do my preferences in the program every time I use it ?

View 2 Replies View Related

AutoCAD Civil 3D :: Unresolved Reference File Cannot Be Opened

Feb 21, 2013

I was working on my project today when the window popped up telling me to reload my pavement file.  When I reloaded the file, the reference said it was unresolved.  I tried to open that file directly, but it would not open. 

View 3 Replies View Related

AutoCad :: Select Or Delete Unwanted Switches In Layout Drawing?

Jan 22, 2014

How to select or delete the unwanted switches in my layout drawing ? I can select it ... may i know what layer is that and it doesn't appear in my model drawing...

View 6 Replies View Related

AutoCAD Civil 3D :: Unable To Reference Vaulted File In Drawing

Oct 15, 2012

We are using Autocad Civil 3D 2010 and are also using the 2010 Vault.

We are having problems with one project in Civil 3D (project in Vault). We are trying to create a surface reference and are getting the error: "Drawing is already attached to project X."

Note: This drawing is not vaulted, only the cross section surface that has the final grade surface in it is vaulted.

When we test the same process with a new document we are able to reference the surface fine and the command shows: _AeccCreateSurfaceReference which works properly.

View 1 Replies View Related

AutoCAD Civil 3D :: Xopen Converts Reference File Name To Lowercase

Mar 28, 2013

If we use the command ._Xopen to open a reference drawing, the file name of the reference file is converted to lowercase, and it gets saved this way if we save the drawing. (We typically name files using Camel Case and want to keep the file names this way)

However if we open the reference file by right clicking on the file name in the Reference Manager and choosing open, then the reference file is opened and the file name retains it's case.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved