In creating our drawing template, I collected alot of unwanted styles and want to delete/clean this up. I only want to keep what's highlighted..By the way, I found style editor and template creation quite tedious & convoluted.
Dell T3500
Intel Xenon CPU
15 MB RAM
64-bit operating system
NVIDIA Quadro 5000
I have generated a model but want to get rid of unwanted geometry to clean it up, how do I delete unwanted geometry?
View 4 Replies View RelatedI have imported a dxf file from our Trimble handheld unit. The dxf has layers built into it that come straight from the trimble software. (ei, FENCE, TANK, WELL HEAD, FIELDLINE) I have custom built layers and linetypes for my .dwt file in Cad so I dont need the layers that followed the dxf file.
For some reason I am unable to delete those layers, I get a warning box saying:
The following layers cannot be deleted:
. layers 0 and Defpoints
. The current Layer.
. Layers containing objects.
. Xref-dependant layers
I am not on the current layer, I am pretty positive there is no objects on the layers I want to delete ( i have deleted my gps points and blocks that were imported)
I am not using any xref dwg's
We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
i want to delete unwanted reference file (xref) information outside boundary of a current drawing.using civil 3D or autocad.
View 1 Replies View RelatedHow to select or delete the unwanted switches in my layout drawing ? I can select it ... may i know what layer is that and it doesn't appear in my model drawing...
View 6 Replies View RelatedI installed LR4 Beta, and imported some photos from my LR3 installation. Probably not the wisest approach I now realise.
Now that I have purchased LR4 (upgrade), and installed it including RC4.1 I realise that I have a catalogue that only contains the images I imported with the Beta version. I still have the original images, and sidecar files in my LR3 catalogue. What I want to do is remove the LR4 catalogue that I currenly have, and then export my catalogue from LR3 and import into LR4. I think I am OK with the Export / Import bit (I have Martin Evening's excellent book). What I don't know how to do is remove the catalogue, or contents thereof from LR4. I could of course just remove all the images from the catalogue by deleting them but I want to be careful here, as I got into this situation by doing things the wrong way in the first place.
System
Windows 7 64-Bit
LR4.1 and LR3.6
I've got CS5 and I'm still learning the ropes. I've advanced to creating my own ICC print profiles, which I'm using. CS5 has a long list of these in the print dialogue. I have occasionally updated the profiles that I have created ( which now appear in this list). I want to keep the list up to date with regards my own profiles and delete the ones that have been superceeded. I've looked through my folders (Windows 7) but I can't find where they are stored.
how I delete unwanted profiles in the list? Can it be done whilst in CS5?
Mac OS X 10.7.4, Lightroom 4.1. File>Export Presets has two groups: Lightroom and User.
Under 'Lightroom' there are a number of duplicated items which I would like to delete (cleanup).
In Library>Application Support> Adobe> Lightroom>Presets>Export .. there is ONLY User. No 'Lightroom.'
Is there a way to delete unwanted ICC profiles in the print module?
View 1 Replies View RelatedMy some autocad files were slowed down. For example i wait about 10 seconds when i edit a text.
Afterwards i see too many text styles in format/text styles command. i want to delete text styles but i can't.
it says "style in use, can't be deleted". I dont know where these text styles come from. Other files when they are infected with the virus, such as. Also have $ signs in text style names.
How does one delete unused or unwanted walls from the properties list?
View 1 Replies View RelatedWhat is the process used to delete unwanted catalogs from the listing that comes up when loading LR 4? Any web article on the general subject of deleting unwanted catalogs?
View 1 Replies View RelatedI've created a number of presets for renaming files when importing into Lightroom 4.4. How do I get rid of presets that I no longer want?
View 5 Replies View RelatedHow do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
We've created a new parts list style for a border.When the border tempalt file is on the c: drive...everything works hunky dory...parts list, revision tables, etc.But as soon as we copy and paste that border into the template library folder for new drgs...the parts list style is missing from the local styles?
So to make it appear on the new document...the style manager has to be set at all styles and the new parts list style has to be saved to the document?What aren't we doing to make it appear on the template?
Also note that because the drawing border template is in a template folder as part of the design projects...it is NOT editable...so it has to be edited outside the template folder.
Now that SP2 is out and we can delete all in one sweep, is it possible to create a macro that would automatically delete all color styles as soon as any file is open? I never use that feature and would gladly pay for such a macro.
View 14 Replies View RelatedIn the idw of my assembly hidden detail is turned off although there is still sub assemblies shown through the main container. Also when there is a section these sub assemblies are show with dotted lines an overlap components they are behind.
My questions are
1. Why are they showing through components they are behind.
2. Why are the lines dashed
See attached image.
The issue I have with Inventor 2010 is when i dimension a rectangle to be 44 in wide and 79 in height it becomes a slated rectangle. This event occurs on the work version of Inventor 2010. I have an educational version of Inventor 2010 at home and when I tried this same dimension rectangle at home it didn't have this issue. Is there a setting I need to turn off to fix this.
View 1 Replies View RelatedThe problem I'm having, or what's annoying, is reappearing (visible) Work Planes. I have a number of parts in my assembly that I make invisible and visible on a regular basis and I find that when I make a part visible, the Work Planes of that part also become visible. It's very annoying and time consuming having to turn off the Work Planes when there's no need for them to be visible.
Is there a way to either make all Work Planes invisible or to permenantly make Work Planes invisible unless you specifically make them visible.
what the best way to show 2 different subassemblies based on the same iAssembly... I would expect a "custom" option as there is from the content center. If I try and change the table for one, the other instance gets updated, and I would like it to stay the same. I understand that this would require a new "branch" in the BOM holding the different sized parts, but there must be a way to accommodate this?
View 1 Replies View RelatedHow do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies View RelatedI created special dimension styles in Inventor 2013 in a drawing and trying to get them into another Inventor drawing. Can this be done like in Autocad by coping to the clip board and pasting into the new drawing?
View 2 Replies View RelatedIs there a way to assign different dimension styles to different sheets in an idw. I have idw drawings with several sheets and use a couple of different dimension styles depending on what is on each sheet. I've created the dimension styles I want to use but I don't know how to assign a dimension style to a specific sheet. For now what I am doing is dimensioning, then as needed for the dimensions that need a different style, right click on the dimension and select new dimension style to changes its dimension style. I would like to assign dimension styles to specific sheets, is there a way to do this? Even though borders, title blocks, etc. are the same throughout the sheets, do I need to create different sheet formats to do this?
View 6 Replies View RelatedWhat's the best way to ensure that all the drawings for my project are updated if I make changes to the Style settings on one of them? I've been putting every sheet into a single drawing file, but now I'm up to about 50 sheets and it takes about 40 seconds for each save, even if I only made a single minor change since the last save. I don't have any iLogic that could be causing this.
So I'd like to split the sheets up into multiple.dwgs, but I want changes I make my Styles to be reflected in all drawings. Can I create an "external" stye file that all drawings pull their style from? Or will I have to export/import to each drawing every time I make a change?
It is possible to change a document style color with a VBA macro or why not with iLogic ?.
I regularly imports STEP and the parts have defined colors. Unfortunately for change must clear all colors of surfaces. By cons, if you edit the styles we see that for each color there is a style with the color name.
So basically if I change a color style, all parts using this style will change.
I needed to create new dimensioning styles - that I can do. However, there doesn't seem to be a way to apply them to a current drawing. In the Annotation section under Format there are no "styles" listed - not even the default.
So, how is one able to populate the list so one may choose a specific style or another? Or, is there somewhere else I should be looking?
BTW...AutoCAD Inventor 2012
Inside of the Style& Standard Editor (Manage-> Style editor) we use ANSI and a Company standard created off of ANSI.
But when I choose the filter to ALL STYLES, I can see JIS, DIN, All other unwanted styles. How can I get rid of them?
Do you all have them too? How do you get rid of them if you dint use them?
C1
Inventor Professional 2013
Vault Collaboration 2013
I've created a self-draining tube and pipe style for the first time. I find that in some routes only the self-draining style is available and in other routes it isn't available (i.e. in the drop down list or to activate in the styles dialog). What the rules are that allow non- or self-draining style selection?
View 5 Replies View RelatedSo I have migrated my template. Now when I start a new assembly, I get the "Styles Conflict" message. I could suppress it, but I'd rather not.I had rather that the file use the style definition in the style library. So I have to update the template with the new style definintion. Question is how to do that now in 2013?
I opened the template, then went to the Material Browser. In the righ hand pane, I picked the "Generic" material and then the up arrow (add material to document). I get a message that it already exists and the local copy will be used.
How do I get it to overwrite the local copy and use the styles definition in my library?
Styles in Inventor have always been confusing to me. I have ONE project file, ONE teplates folder, but TWO different drawing templates (one for single part drawings, one for assembly drawings). For simplicity sake, lets say the ONLY difference I want between the two drawing templates is the parts list. The assembly template parts list should have lets say one more column than the other.
I did what I thought should do it but it isn't working properly. What's the best way to accomplish this? Right now within the same style library I have two parts lists set up, and I have two "standards". The only difference between the two standards is which parts list box is checked on "available styles". When I change "object defaults" to onw parts list or the other, it changes that default for all drawing templates, not just the one I'm using.