AutoCAD Inventor :: Using Created Dimensioning Styles

Feb 27, 2012

I needed to create new dimensioning styles - that I can do.  However, there doesn't seem to be a way to apply them to a current drawing.  In the Annotation section under Format there are no "styles" listed  - not even the default.

So, how is one able to populate the list so one may choose a specific style or another?  Or, is there somewhere else I should be looking?

BTW...AutoCAD Inventor 2012

View 6 Replies


ADVERTISEMENT

AutoCAD Inventor :: Create New Dimensioning Styles For Company To Use As Standards

Jan 25, 2012

I'm using Inventor 2010.

I've been told to create new dimensioning styles for the company to use as standards when making a drawing. One thing mentioned in particular was the inclusion of 0 inches in architectural drawings.

For example: say a part is 14 feet, 1/2 inches long. Inventor shows this: 14' - 1/2" , but they want this: 14' - 0 1/2" . They've had a problem before with the 1/2 being printed strangely, and the machinist thought it said 1 1/2.

They say that including the 0 is standard, and I need to make it happen.?

View 9 Replies View Related

AutoCAD 2013 :: Dimensioning A Section Created From Baseview?

Feb 1, 2013

When using Layout/baseview/section tool, you end up with paper space views of the model so that when you go to dimension the view, you get the paper dimension, not the model dimension. How can I change this behavior?

View 4 Replies View Related

CorelDRAW Graphics Suite X4 :: How To Change Default Font Size Created By Dimensioning Tool

Sep 3, 2011

How can I change the default point size of the numbers that the dimensioning tool generates? Right now it is defaulted at 24 pt. and i have to manually select and change to 10 pt all through my drawings.

View 2 Replies View Related

AutoCAD Inventor :: Update Styles Library To Keep From Getting Styles Conflict Error Box

Jul 6, 2011

How do update the styles library to keep from getting the Styles Conflict error box.  I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.

I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.

View 9 Replies View Related

AutoCAD Inventor :: New Style Missing From Local Styles / Yet Appears In All Styles?

Aug 8, 2012

We've created a new parts list style for a border.When the border tempalt file is on the c: drive...everything works hunky dory...parts list, revision tables, etc.But as soon as we copy and paste that border into the template library folder for new drgs...the parts list style is missing from the local styles?

So to make it appear on the new document...the style manager has to be set at all styles and the new parts list style has to be saved to the document?What aren't we doing to make it appear on the template?

Also note that because the drawing border template is in a template folder as part of the design projects...it is NOT editable...so it has to be edited outside the template folder.

View 3 Replies View Related

AutoCAD Inventor :: Dimensioning In IDW?

May 24, 2012

I need to know how to dimension to a theoretical sharp on bent flanges.  In an .idw it wont snap to the sharp and when a schetch is created for one it does not dimension between them only one or the other. 

View 2 Replies View Related

AutoCAD Inventor :: Dimensioning ISO Views

Jul 11, 2013

Is there a way to change the way the dimensions text shows up at arbitrary angles and make them all uniform?

View 4 Replies View Related

AutoCAD Inventor :: Sketch Dimensioning - Midpoint

Apr 30, 2013

It must surely be in there somewhere but I cant find a way to dimension to a line's midpoint in a sketch.

View 3 Replies View Related

AutoCAD Inventor :: Tangent Dimensioning Of Arcs

Feb 3, 2012

This is probably a simple one, but when I dimension from an edge to the tangent of a radius or circle. It always snaps to the center.  How do I get the dimension to snap to the tangent point?

View 9 Replies View Related

AutoCAD Inventor :: Dimensioning - Decimal / Fraction

Nov 14, 2011

Is there a way that i can Double Dimensioning? as to have one dimension in decimal and one in fraction all in the same dimension line?

 Im using 2011 RS

View 1 Replies View Related

AutoCAD Inventor :: Dimensioning Between Different Extrusions On One Part?

Sep 11, 2012

How do I dimension, and assign editable parameters between different extrusions on one part, to change the height, width, etc?

View 9 Replies View Related

AutoCAD Inventor :: Dimensioning Holes From Datums

Mar 20, 2013

Using the Hole command, I want to locate / reference off datums, this is something I can do in Pro-E.  It's not a choice, that I can find.

View 8 Replies View Related

AutoCAD Inventor :: Dimensioning Curve For Fabrication?

May 14, 2012

I trying to figure out a way of dimensioning a curve for fabrication in inventor. The way i have done this before was to provide a chart of X and Y dimensions of points along the curve. See the attached drawing.

View 6 Replies View Related

AutoCAD Inventor :: Dimensioning To 2 Implied Intersections

Aug 22, 2012

I have run across a situation that I have not been able to find having been previously asked. I have attached the file of what I am working on.

I have 2 dimensions to the implied intersection, but how do I put the dimension when there are 2 implied intersections? Such as along the bottom of the part.

View 3 Replies View Related

AutoCAD Inventor :: Dimensioning Holes In Drawing

Jan 25, 2012

I have a couple of quick questions about dimensioning holes in drawings .

First, if I have a hole in a rod or shaft so the surface isn't a full circle I get the dimension as a radius. Can I change it to a diameter?

Second, in a model, how do I dimension or measure to the edge of a round rather than to it's center? In SW I could hold the shift key while selecting, is there a similar method here?

View 2 Replies View Related

AutoCAD Inventor :: Ordinate Diameter Dimensioning?

Aug 10, 2009

I design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.

View 9 Replies View Related

AutoCAD Inventor :: Dimensioning To Virtual Sharps In DWG?

Oct 26, 2011

Is there an easier way to dimension to a virual sharp or place the ordinate dimension origin on a virtual sharp than by trying to drag the point along each line until you get the dotted lines to intersect?

View 6 Replies View Related

AutoCAD Inventor :: Dimensioning Angles In 3D Sketches

Oct 4, 2013

In the course of working up a tooling proposal, I attempted to replicate a 3D part from a customer print. While doing so, I noticed that 3D Sketch will not, under any circumstances that I can find, allow an angular dimension between a line and a plane. The customer print has two pipes projecting at odd angles from a base flange, one of which has an elbow. The print lists datum dimensions for the open pipe ends and the elbow, and gives vertical and horizontal angular dimensions to define the directions in which the pipes emerge from the flange. I have defined these three datum points in 3D space without any trouble, but Inventor 2013 will not allow me to define an angle between these sketchlines and the XZ and YZ origin planes, or between these sketchlines and the faces of the flange base I've constructed.

I am currently waiting on a proper 3D CAD model from the customer, and I'm considering longhand trigonometric calculations to place these lines properly, but I find it very hard to believe that Inventor is incapable of constraining a line to lie along what is effectively the surface of a cone.

Using:
Inventor 2013
AutoCAD 2013

View 5 Replies View Related

AutoCAD Inventor :: Dimensioning Suppressed Parts

Feb 28, 2012

I have created some "programs" to automate drawing creation of some of our most common products. The problem I hav eis with my assembly drawing. When parts are suppressed and unsuppressed, they don't seem to behave the same way that features do. When you dimension a part feature in an idw and suppress that feature, if a week later you unsuppress that feature the dimenensions come back.  Parts don't seem to follow this behaviour. If you dimension a part, suppress it, open and save the drawing, then later unsuppress it and open the drawing back up the dimesnions do not come back. Is there anyway for me to get these dimensions to "stick"?

View 9 Replies View Related

AutoCAD Inventor :: Show Symbol While Dimensioning?

Aug 24, 2011

How do I make inventor show the " symbol while dimensioning?  It will show when using architectural units but not in decimal.  R2012

View 4 Replies View Related

AutoCAD Inventor :: Dimensioning Using Drawing Sketch Points?

Oct 8, 2012

I am trying to use sketch points in drawing for dimensioning. Below is portion of my code. The code fails when AddLinear is called. Is it even possible to use drawing sketch points for dimensioning?
 
invSheet = invDrawingDoc.ActiveSheet
Dim oTransGeom As Inventor.TransientGeometry= invApp.TransientGeometry
Dim pt1 AsPoint= oTransGeom.CreatePoint(0, 0, flangeOD / 2)

[Code]....

View 1 Replies View Related

AutoCAD Inventor :: Dimensioning To Z Shape Implied Intersections

Nov 13, 2012

I am needing to put a horizontal dimension from the implied intersections of a "Z" shape. In the attached screen shot, I have a question mark at the dimension I'm needing.

I have tried the RMB / Intersection in different ways, but none giving me the dimension. How do I go about getting this dimension?

View 2 Replies View Related

AutoCAD Inventor :: Dimensioning To Spline In An Orthographic Drawing?

Mar 21, 2013

I am currently attempting to dimension to a spline in an orthographic drawing and running into some issues. I can't seem to find a way to properly dimension rather than making microscopic holes in the piece and that way giving the .idw something to grab on to for dimensioning.

View 2 Replies View Related

AutoCAD Inventor :: Inch And Metric Dimensioning On A Drawing

Jun 28, 2013

How can I have both Inch & Metric dimensions on a drawing? Preferably, inch above metric below.

View 1 Replies View Related

AutoCAD Inventor :: Automate Dimensioning Of Drawing Views

Feb 10, 2012

Is it possible to automate dimensioning of drawing views?

Here's the situation: I have an Inventor assembly that's controlled entirely by iLogic. My users, who have zero Inventor training/experience (or with any 3D CAD software for that matter), pull up the assembly. They enter product related parameters from paper work orders into an iLogic form and hit a "Go Button". The assembly updates based on the parameters, suppressing and unsuppressing parts, features, patterns, and mates.  This works great.  They then hit a "Run Job" button. This takes them to an .idw where they fill out another form with order specific information and hit another "Go Button". This then cycles through every detail sheet and the parts list, deleting sheets deeemed unneccessary for the product, generating part numbers, exporting dxf's, generating an excel BOM, etc.

This works great as well. The problem is with the dimensions.  They blow all apart when the model changes.  I know I can run some API code to delete dangling dimensions, but is there away to programmatically create dimensions so I don't have to rely on my users remembering what needs them?  I've played around with using model dimensions, but I find that they stay and remain attached even when their corresponding feature gets suppressed. 

IV 2012

View 1 Replies View Related

AutoCAD Inventor :: Dimensioning Isometric View (text Orientation)

Aug 3, 2012

I'm wondering is it possible to orientate the dimension text alligned to paper(2.jpg) but not the UCS of Isometric drawing(1.jpg).

Sometime I need to allocate my drawing with dimensioning in isometric view because its more easy to read.

I'm placing my drawing in *.idw. 

View 8 Replies View Related

AutoCAD Inventor :: Dimensioning Compound Angles Using Current View?

Feb 13, 2012

I'm having problems getting Inventor to dimension using the current view option on an assembly.  I ungrounded the assembly and constrained it to the angled work planes that I needed so I have to use the current view option, but when I try to dimension to the intersection of the angles, it won't give me a dimension.I'm using Inventor 2011.

View 1 Replies View Related

AutoCAD Inventor :: 2D Dimensioning Quality - Adding Text Label

Feb 6, 2013

I find the 3D side of the software is great for modeling. But when it comes to the 2D drawing side of it, especially dimensioning and the adding of text label is very poor, when compared again other CAD packages including AutoCad Mechanical and LT.

Why is it not on par with AutoDesk other 2D packages!

(Using Inventor 2013)

View 1 Replies View Related

AutoCAD Inventor :: Dimensioning To Central Axis Through Multiple Sketch Planes

Dec 3, 2011

I am creating a part that consists of a series of intermediate Lofts.  The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another.  I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part.  Most, but not all, of my sketch planes are normal (perpendicular) to that axis.

I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane.  I am having a minor difficulty.

When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis,  Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point.  Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.

Is this correct behavior?   To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?

View 2 Replies View Related

AutoCAD Civil 3D :: Applying Default Contour Labels Styles To Surface Styles?

Aug 21, 2012

How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style).  Right now the default is a "finished contour" label style for all surfaces.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved