I'm having problems getting Inventor to dimension using the current view option on an assembly. I ungrounded the assembly and constrained it to the angled work planes that I needed so I have to use the current view option, but when I try to dimension to the intersection of the angles, it won't give me a dimension.I'm using Inventor 2011.
View 1 Replies
In the course of working up a tooling proposal, I attempted to replicate a 3D part from a customer print. While doing so, I noticed that 3D Sketch will not, under any circumstances that I can find, allow an angular dimension between a line and a plane. The customer print has two pipes projecting at odd angles from a base flange, one of which has an elbow. The print lists datum dimensions for the open pipe ends and the elbow, and gives vertical and horizontal angular dimensions to define the directions in which the pipes emerge from the flange. I have defined these three datum points in 3D space without any trouble, but Inventor 2013 will not allow me to define an angle between these sketchlines and the XZ and YZ origin planes, or between these sketchlines and the faces of the flange base I've constructed.
I am currently waiting on a proper 3D CAD model from the customer, and I'm considering longhand trigonometric calculations to place these lines properly, but I find it very hard to believe that Inventor is incapable of constraining a line to lie along what is effectively the surface of a cone.
Using:
Inventor 2013
AutoCAD 2013
Is there a way to have AutoCAD use the "right angle symbol" instead of showing 90 degrees when it measures right angles?
View 8 Replies View RelatedI'm wondering is it possible to orientate the dimension text alligned to paper(2.jpg) but not the UCS of Isometric drawing(1.jpg).
Sometime I need to allocate my drawing with dimensioning in isometric view because its more easy to read.
I'm placing my drawing in *.idw.
I need to create an axonometric view of a model with specific angles (see attached). What is the best and quickest way to do this?
View 4 Replies View Relatedhow can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLAN current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
Is it possible to know if the assembly view is isometric view or not.I need to perform check to get this value.
View 9 Replies View RelatedWhen calling the Camera.SaveAsBitmap method and specifying a background color, should it reset the background color of the current view? Calling it in 2014 does this.
Also is there a way to apply the camera settings without changing the current view? I want to change the camera settings but just save the images to a file?
Inventor Addins
FlowTools for Inventor
ilxButton Panel (Buttons for iLogic Rules)
How to show the deflection anglesof alignments. I want to show those angles in band set or profile view.
AutoCAD Civil 3D 2012 SP 2
I would like to get the current AutoCAD View name in .NET.
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.GetCurrentView().Name always returns "", even when viewing a View with a name.
When I use trim or extend commands and have to zoom or pan to select additional objects the command drops selection in previous view and only edits items in current view when executed.
Is there a system variable I can use to change this little time waster?
How can I get the pixel size in current view?
i.e., how many meters a pixel's width in the current view stands for
I'm working on a couple of models (all using the same "stage" for rendering) and I split the models up into their own separate dwgs but retaining the stage area for each. What I'm having an issue with is rendering the current view in model space. What's happening is that I'll either get an all black (meaning nothing was rendered) or I'll get a rendered piece of the stage where a model once was set up, but not the current view for which I want (where the model is set now). So basically, the rendered view is pointing somewhere else. I'm not setting any of the camera views however to render; I've been using just the current view so I can get exactly what I want. I just need to figure out "how" to get it to render what I'm seeing on screen (consistently) and not something off to the side, or a shot of the wall or floor, or the old location of previous renders, etc. Sometimes switching back to 2D wire frame will fix the problem, but now it's not. I've tried setting the camera view current and that isn't working either. It still renders what was an "old" rendered view--like it's stuck in memory. Closing and re-opening CAD doesn't fix the issue. This is very frustrating. All I'm trying to get is a WYSIWYG rendered view.
View 1 Replies View RelatedI'm looking to find the current rotation of my view in modelspace.
This isn't the ucs direction but any arbitrary view i'm using.
For example using 3dorbit to rotate around an object.
I want to match some temp graphics to align flat to my view.
I see there is a VIEWDIR variable. so that may be what I need.
I have several parts to get cut for one of our customers.
The provided the pdf I have attached, and I need to create and .ipt so we can cut it on our tube laser.
This is getting the better of me on how I would put my work planes in order to get the correct angles.
How to accomplish this?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
I'm stuck on a few different emboss cases. The following examples are just dumbed-down models to learn from. If it matters - I'm actually embossing patterns on more complicated parts - not text on primitive shapes.
Case 1: Emboss across several surfaces. Please see attached file "Wrap Emboss 1". I can wrap to a face - but not all three faces on the solid that I want my "TEST TEST TEST" message to span across. My embossed text goes off into space - it doesn't wrap around the edge of the solid as desired.
Case 2: Emboss text (or some other arbitrary shape) onto a single (but compound) surface. Please see file "Compound Emboss 2". If the curvature of the part isn't significant - there are a few ways to fake/trick out the model to get a passable result. BUT - when the curvature of the surface is significant relative to size of the text/pattern to be embossed - I haven't yet found a solution that doesn't wildly distort the embossed feature. As the surface of the part is compound - I can't use the "Wrap to Face" option without an error. The resulting embossed feature is unacceptable.
I need to know how to dimension to a theoretical sharp on bent flanges. In an .idw it wont snap to the sharp and when a schetch is created for one it does not dimension between them only one or the other.
View 2 Replies View RelatedI love annotative scaling of objects it is a great feature. I am however having one problem that I'm not sure if I've missed a setting or something. Is there a way to prevent civil 3d from scaling your annotative objects based on the view scale you are looking at? For example if I zoom out (in model space or max viewport) to show my entire drawing and regen, civil 3d scales all my text and blocks to an enomous scale esentially blocking my entire drawing with solid colour. also if I zoom into a small area to do some detail work all my text becomes microscopic and unuseable. This makes adjusting text so it doesn;t overlap other text very difficult if it never appears at the correct size. Is there a way to freeze annotative objects at thier correct scale (for the current viewport scale) so they dont scale simply because you zoom in or out on a drawing?
View 3 Replies View RelatedIn the attached part, I am trying to show a hole drilled at a compound angle. I have attached a pic of what the part is supposed to look like. I am having trouble laying out the plane on a compound angle. The hole should be centered on the width of the flat and drilled through. 15° angle one way and 20° another way.
The ipt file attached is really messy in attemps to acheive the compound angle.
I am using Autodesk Inventor 2013.
Is there a way to change the way the dimensions text shows up at arbitrary angles and make them all uniform?
View 4 Replies View RelatedIt must surely be in there somewhere but I cant find a way to dimension to a line's midpoint in a sketch.
View 3 Replies View RelatedThis is probably a simple one, but when I dimension from an edge to the tangent of a radius or circle. It always snaps to the center. How do I get the dimension to snap to the tangent point?
View 9 Replies View RelatedIs there a way that i can Double Dimensioning? as to have one dimension in decimal and one in fraction all in the same dimension line?
Im using 2011 RS
I needed to create new dimensioning styles - that I can do. However, there doesn't seem to be a way to apply them to a current drawing. In the Annotation section under Format there are no "styles" listed - not even the default.
So, how is one able to populate the list so one may choose a specific style or another? Or, is there somewhere else I should be looking?
BTW...AutoCAD Inventor 2012
In a part file is it possible to find the adaptive workplanes used to create extrusion1. And then find if the two workplanes are at an angle with respect to the origin planes.
Have been looking for a while but it seems hard to find information on workplanes
How do I dimension, and assign editable parameters between different extrusions on one part, to change the height, width, etc?
View 9 Replies View RelatedUsing the Hole command, I want to locate / reference off datums, this is something I can do in Pro-E. It's not a choice, that I can find.
View 8 Replies View RelatedI trying to figure out a way of dimensioning a curve for fabrication in inventor. The way i have done this before was to provide a chart of X and Y dimensions of points along the curve. See the attached drawing.
View 6 Replies View RelatedI have run across a situation that I have not been able to find having been previously asked. I have attached the file of what I am working on.
I have 2 dimensions to the implied intersection, but how do I put the dimension when there are 2 implied intersections? Such as along the bottom of the part.
I have a couple of quick questions about dimensioning holes in drawings .
First, if I have a hole in a rod or shaft so the surface isn't a full circle I get the dimension as a radius. Can I change it to a diameter?
Second, in a model, how do I dimension or measure to the edge of a round rather than to it's center? In SW I could hold the shift key while selecting, is there a similar method here?
I design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.
View 9 Replies View Related
