I am working on a project with several sheets. The viewport rotation (or angle) on each sheet is different. How can I find out the viewport rotation (or angle)?
I have a property line that is N 36d19'52" E but needs to be N 12d52'18" E. The obvious and calculated rotation angle would be 23d27'34" but when I rotate the line by the calculated angle it doesn't rotate to the right angle. It's off by 0d11'10"!? When I draw a line by bearing at N12d52'18" E and inquiry the angle between the property line and the drawn line the angle difference is in fact 23d27'34".
I just received a large floor plan and loads of the text is upside down. Usually I would use the TORIENT command in Express Tools although this doesn’t seem to work.
The error I get is:1 object was not parallel to the current UCS.No valid objects selected.
I’ve tried flatten, mirror & rotate but I still can’t get the text to display correctly.
I’ve attached a DWG file (2010 format) with a piece of text.
Using the mvsetup, a colleague of mine rotated the model space in the viewport. I cannot determine what angle was used, is there an setting in the properties manager to show the rotation angle or other way to find out?
I've received a drawing from a client today and in it there are several text styles. One has Arial as its font. When this text style is current and we insert some dtext AutoCAD does not prompt for the text rotation angle, it uses the last rotation angle we used.
As far as I know there is no system variable that controls this behaviour, or have I missed it. Other delivered text styles do not have this problem.
I have a plan with lots and lot numbering. I made the lot number text annotative and matching view orientation. But when it rotates in the view it rotates about the left justification point instead of middle as inserted into drawing. So I inserted lot numbert text into drawing and changed text to non-annotative, but now i can not change the text rotation angle unless i use rotate command on each individual piece of text (was trying to pick all text and change in properties box). Using feature lines to assist in grading design so not sure if this is an autocad problem or a civil 3d 2012 problem. I can rotate dtext made or inserted in drawing.
I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
I have some 300 images, all handheld shots done in an on-location studio set. They all need varying amounts of image rotation since they're handheld. There's a beaded curtain in the background, so manually I use the ruler tool, draw a line along a strand of beads, and then image/rotate/arbitrary.
I need to create an action that will (1) do the arbitrary rotation and then (2) save and close the file.
However, when I record this, the value of the rotation of the sample file I'm working is what gets recorded (not surprising). In other words, if image A needs 0.28 degrees of rotation, that's not what I want for image B which might need -0.15 degrees instead. The action recorded 0.28.
Is there a way to create an action that will simply rotate according to the ruler once I've drawn it?
I've been using Corel Draw! 8 for years and my favorite tool was the angle of rotation. For example, I would select an object, usually a rectangle that has the point of rotation at end of the narrow rectangle. As I rotated it, I could see how much the angle of rotation in degrees is. Therefore I could type a value in the box and the rectangle would rotate some many degrees. Fast forward to my Corel Draw 12. Now when I click on the same object, the box will display what the angle is in degrees already based on the circular angle startingaat the nine o'clock position. I need it to say ZERO and I can't find the setting to set it at zero
what I am drawing is I rotate a narrow rectange and basically creating a dial face for instruments.
I would like to extend the bezier handle at it's current angle. Till now, I have been using a guide at the angle and following it when plotting the next curve (as above). I know you can use shift to lock it at a 90 degree, 45 degree angle, etc., but I would like tot keep it at its current angle. Is there a keyboard shortcut for this?
Where can I find the “steel angle” L-shape?In the palettes, I could find the I, W and C steel shapes but wondering if the steel angle (L-shape) is somewhere else in the AutoCAD
I am working on an old drawing with 2007 LT. When I draw a horizontal line in modelspace, It shows as a vertical line in a viewport of the layout.
In modelspace, when I type UCS, z, it shows angle about z is 90 degree. I can chang it to 0 here. But still the the line in the view is not rotate back.
How is this set up? How could I rotate back in the view?
I would like to get the current AutoCAD View name in .NET.
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.GetCurrentView().Name always returns "", even when viewing a View with a name.
When I use trim or extend commands and have to zoom or pan to select additional objects the command drops selection in previous view and only edits items in current view when executed.
Is there a system variable I can use to change this little time waster?
I'm working on a couple of models (all using the same "stage" for rendering) and I split the models up into their own separate dwgs but retaining the stage area for each. What I'm having an issue with is rendering the current view in model space. What's happening is that I'll either get an all black (meaning nothing was rendered) or I'll get a rendered piece of the stage where a model once was set up, but not the current view for which I want (where the model is set now). So basically, the rendered view is pointing somewhere else. I'm not setting any of the camera views however to render; I've been using just the current view so I can get exactly what I want. I just need to figure out "how" to get it to render what I'm seeing on screen (consistently) and not something off to the side, or a shot of the wall or floor, or the old location of previous renders, etc. Sometimes switching back to 2D wire frame will fix the problem, but now it's not. I've tried setting the camera view current and that isn't working either. It still renders what was an "old" rendered view--like it's stuck in memory. Closing and re-opening CAD doesn't fix the issue. This is very frustrating. All I'm trying to get is a WYSIWYG rendered view.
How do I find the current version of VSProX6 that I am running?
I have tried numerous times to download the Newblue TitlerEX from the "Do More Tools" tab. I get an "Your download is ready. Install Now" notice, but nothing happens and nothing appears in my download folder.
I found this image in a textbook and it's supposed to be a three view first angle projection of the boat. It looks like main view is a plan view (top).
What confuses me about this is that the left view, looks like it's of the left side. But only third angle projections order views this way (left view being of the left side, top view being of the top, right view being of the right). So is this picture a first angle projection or a third angle? Or is it all together wrong?
I'm having problems getting Inventor to dimension using the current view option on an assembly. I ungrounded the assembly and constrained it to the angled work planes that I needed so I have to use the current view option, but when I try to dimension to the intersection of the angles, it won't give me a dimension.I'm using Inventor 2011.
When calling the Camera.SaveAsBitmap method and specifying a background color, should it reset the background color of the current view? Calling it in 2014 does this.
Also is there a way to apply the camera settings without changing the current view? I want to change the camera settings but just save the images to a file?
Inventor Addins FlowTools for Inventor ilxButton Panel (Buttons for iLogic Rules)