CorelDRAW Graphics Suite 12 :: Changing The Angle Of Rotation Preset?
Mar 20, 2012
I've been using Corel Draw! 8 for years and my favorite tool was the angle of rotation. For example, I would select an object, usually a rectangle that has the point of rotation at end of the narrow rectangle. As I rotated it, I could see how much the angle of rotation in degrees is. Therefore I could type a value in the box and the rectangle would rotate some many degrees. Fast forward to my Corel Draw 12. Now when I click on the same object, the box will display what the angle is in degrees already based on the circular angle startingaat the nine o'clock position. I need it to say ZERO and I can't find the setting to set it at zero
what I am drawing is I rotate a narrow rectange and basically creating a dial face for instruments.
View 8 Replies
ADVERTISEMENT
Mar 9, 2011
I've created a PDF preset which gives the result I want. Now I want everyone who is doing work for me, using Corel, to have the same settings.
Is there a way to export the preset or is that info stored in a file somewhere so that they can use it too (without me having to tell them all the steps and save it, etc.
View 2 Replies
View Related
Mar 2, 2013
Every time I try to type in coreldraw it always prints at 90 degrees to the page.
View 13 Replies
View Related
Dec 10, 2012
Place a guideline on the page.- In the property bar, in the field Angle of Rotation,for example you can put 15 degrees or something else.What's happening?
View 1 Replies
View Related
Feb 4, 2013
I export many web graphics at the same size so with x6. I thought I would love the presets with x6 however when I set the preset to export like at 700px width it changes and re-sizes the exported graphic to 350px width. It show 700px on the screen when I load the preset however right when I click export or if I place me cursor in the transformation box it changes. I even tried to change it too 1400px hoping it would then change it to 700px but it still changes it to 350px.
View 2 Replies
View Related
Dec 17, 2012
I modified the "Prepress" pdf preset to show crop marks and saved this pdf preset as "Cropmarks". However when I use the "Collect for Output" wizard, the new pdf preset (i.e. "Cropmarks") does not show up as an option in the dropdown.
Is there a way to make it available/show up in the "Collect for Output" wizard?
View 1 Replies
View Related
May 28, 2013
The controls that used to appear on the workspace after the pattern fill tool is selected are no longer accessible. I don't know the name of this control, but it has handles allowing a pattern fill to be re-sized and rotated within an object.
View 14 Replies
View Related
Aug 16, 2011
if you can type the alpha symbol for angle in Coreldraw.
View 2 Replies
View Related
Oct 3, 2011
Im working with an image (pictured below) and I want to make all of the white bits clear, so as to allow whatever colour is behind to show through.
View 7 Replies
View Related
May 21, 2008
I am having a problem with cutting the size of text that I want. On the main working screen I type in the specific dimensions of the text that I want to cut ( I have a graphtec cutter). When I pull up "Cut/Plot" in the dialog box under Job Size....the size is NEVER what I have specified. It is normally smaller.I will then type the dimensions into the Job Size field and cut the letter. BUT when I cut the letter......it is not the size I typed into the job size.
View 9 Replies
View Related
Apr 3, 2012
I'm surprised that a lot of "application data" seems to be stored under the Program Files Folder. I thought this was a no-no? I'm particularly thinking of :
C:Program FilesCorelCorelDRAW Graphics Suite X6Custom Data
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawCustomMediaStrokes
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawGMS
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresets
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawWorkspace
C:Program FilesCorelCorelDRAW Graphics Suite X6Programs64Addons
Is there anyway to move the default locations, perhaps by a registry hack? I'd like to move it, at least to the AppData folder or even to another drive where it is easier to backup/make changes.
View 8 Replies
View Related
Oct 5, 2011
I'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies
View Related
May 21, 2013
I am trying to do this tutorial: [URL]....... but I have a trouble at Step 3 : Creating Web Header - rather: Now go to the " Shape Tool ", double click on the bottom middle line to create a custom node / corners.
View 7 Replies
View Related
May 14, 2013
I'm trying to figure out how to accurately display the current rotation angle of an object in DRAW X6. Based on my drawing precision settings, the angular accuracy is there, but it's not properly displayed.
IE - If I type in 5.05 deg rotation, it will DISPLAY 5.1 but will actually be 5.05.
Is there a way to update the display to show more than one decimal place for rotation?
View 3 Replies
View Related
Aug 17, 2013
I have a client who is waiting for a flyer design i did. So i created a christmas flyer. It looks nice with christmas colors and all. When i go to convert it into a jpeg in photo paint, the green changes to lime green and the other colors change as well. To florescent vibrant type. This just started happening recently. When i played around with settings, i saw something about RGB, CMYK (which dulls everything).
View 13 Replies
View Related
Mar 5, 2013
When I copy and paste a block of text, and then use the x and y coordinates to move it into position, the text characteristics change. It becomes all caps, and italicized text becomes non-italic. This happened with both Perpetua and Stone Sans.
View 7 Replies
View Related
Jun 3, 2012
When i scan an object i cannot alter the colour when using X5.
View 3 Replies
View Related
Aug 24, 2011
I seem to vaguely recall a method from some vector drawing program where you can press or hold ctrl or alt or shift and change the next type of node you will draw while using the bezier tool, or the pen tool, or the multi-line tool.
Is there any way to do this in 12, or use VBA to make it happen. I really just need to switch back and fourth between cusp and symmetrical.
View 6 Replies
View Related
Mar 26, 2013
Recently, I'm finding the size of the drop down menu text too small. Is there a way to increase the text size?
View 3 Replies
View Related
May 25, 2012
Been a CorelDraw user for a long time. Just installed x6 (previous X4), and tried to export an image to jpg. X6 seems to have this dialog box with all these presets. How do I manually set my resolution, pixels, etc. as in the previous versions?
View 4 Replies
View Related
Jul 24, 2011
Is it possible to change the color profile of a document after you've created it?
View 2 Replies
View Related
Mar 7, 2011
it is possible to change the background color of the application window ?
I would like the whole area outside the drawing window (the drawing page) to be grey, so that it can be clearly distiinguished from the actual drawing page, which is white, with a shadow line around the drawing page.
View 16 Replies
View Related
Sep 2, 2011
The company i work for has full dye sublimated uniforms. our customer base would really like to use photographs on their shirts but we are unable to control the colors. We have a color palette that our factory uses to color match everything. how do i change colors in photoshop (channels) to match our color palette in corel so that there is consistency and the images don't appear washed out or flat.?
View 1 Replies
View Related
Jul 9, 2011
I have installed corel draw x5..while installing it dint ask any language, it kept on installing. After installing im not able to understand the language. How can i change it to English?
View 3 Replies
View Related
Jul 17, 2013
how to take a jpg or gif file and change the colors of the image? I am having difficultly doing so. It is our company logo which is in 2 colors and I merely want to change it to white.
View 9 Replies
View Related
May 4, 2012
I have taken some pictures with my camera, I cannot adjust the white balance of the camera, so the pictures come out with a slight grey background. I want to change that to a white background.
View 12 Replies
View Related
Aug 2, 2011
I'm using corel draw X5, I can't move object if I select "Traditional CorelDRAW" option for ctrl/shift keys, under Pick Tool menu in options window.
If I choose "Windows Standard", I'll be able to move the objects. But I don't like this behavior, because the way it draws new objects, anchoring them in center, instead of upper left corner.
This bug started just after I change this option, "just for curiosity". I wish I never discovered it. How can I solve it? I want to set ctrl / shift behavior to "Traditional CorelDraw" AND be able to move objects.
View 14 Replies
View Related
Apr 1, 2011
I have a patern, I need to move, I know in advanced I can more it with Origin, but I have to close and open the window.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
May 28, 2012
When I select Export HTML., and click the Browser preview, Corel Draw X6 selects MS Internet Explore which is not my default Browser.
I've checked Tools | Options and Export HTML, and searched the forums, but can't find out how to default to either Firefox or Chrome.
View 4 Replies
View Related
Mar 12, 2011
Until recently, CorelDraw X3 was working just fine. Now however, whenever I change an object's line or fill attributes, CorelDraw automatically sets those as the new defaults, overriding the defaults I had previously set. Clicking on a a color in the palette with nothing selected no longer invokes the defaults dialogue box.
I've looked through the various options dialogues in case I had inadvertently checked a box I shouldn't have, but I can't find anything. I've been using Draw since version 2, so I'm pretty familiar with it. I've never encountered this behavior before. I've had X3 installed for about 3 years or so.
I'm running CorelGraphics X3 SP2 in Vista, 2GB RAM, Nvidia graphics.
View 4 Replies
View Related
Aug 19, 2013
I dobbleclick on fill-color icon in lower right side of the screen to change the fill-color. But no dialog-box appear. But if I try to click anywhere in Corel after this I just get a beep. Looks like there is a dialog-box outside screen or something.
View 4 Replies
View Related