I have installed corel draw x5..while installing it dint ask any language, it kept on installing. After installing im not able to understand the language. How can i change it to English?
View 3 RepliesYesterday I bought and installed successfully Corel VideoStudio Ultimate X6.Unfortunately the installation is in Japanese (the language of my operating system - Windows Vista). how can I change the language to English.
View 7 Replies View RelatedI followed the instructions in the below link where I changed the Langue settings manually in Notepad.
[URL].....
But when I open Revit after this change, I get an error message and says the licence I have in not valid and I can only use the software as a trial version. When I change back the language setting to German, this problem goes away.
Is there another way to change the language setting for Revit?
I was trying this Printing Merge many times. I noted that I could run the Printing Merge only with English Words because when I tried other languages such as Chinese and Khmer. Most of my words became error, so I really couldn't use it as needed. Is the Printing Merge used only with English?
On the contrary, I used to use the Printing Merge in MS Word. It works with all languages. I want to use the Printing Merge in Coreldraw 12 beside English.
My CorelDRAW is in Portuguese. I don't understand that language, and i want to change it on English.
View 2 Replies View RelatedSince today, I get the error mentioned in the subject when trying to open Corel Draw X5 (part of Suite X5). Running on WinXP. No previous problems. But I do think that it recently installed an automatic update.
I tried Repair (via Control Panel), but it did not work.
I want to install ColorDRAW graphics X6 on an Windows 64 BIT computer.
We know that is officially not supported. But is there a workarround available ?If already tried to run in it in compatibility mode on an account with admin rights.That doesn't work.I get an error during the installation:Microsoft Visual Basic for applications 7.1 is not supported.
I'll install a font using BFN, and it still doesn't show up in the program. What gives?
Core 2 Q6600 ~ 4GB DDR2 ~ nVidia 8800 GT Superclocked ~ 150GB 10,000 RPM Hard Drive
Will I lose my workspace or CM settings when installing from 16.1 to 16.2?
Right now everything is running somewhat smoothly for me and I'm wondering if I should even bother upgrading?
While installing X5 it seems to get stuck while installing fonts and clipart ! My tower is making all these orgasmic sounds, but after a while it sounds like a scratched record making all the same sounds continuously. The gauge that shows me how far the download is proceeding seems to get stuck at the 25% mark.
View 4 Replies View RelatedIm working with an image (pictured below) and I want to make all of the white bits clear, so as to allow whatever colour is behind to show through.
View 7 Replies View RelatedI am having a problem with cutting the size of text that I want. On the main working screen I type in the specific dimensions of the text that I want to cut ( I have a graphtec cutter). When I pull up "Cut/Plot" in the dialog box under Job Size....the size is NEVER what I have specified. It is normally smaller.I will then type the dimensions into the Job Size field and cut the letter. BUT when I cut the letter......it is not the size I typed into the job size.
View 9 Replies View RelatedI'm surprised that a lot of "application data" seems to be stored under the Program Files Folder. I thought this was a no-no? I'm particularly thinking of :
C:Program FilesCorelCorelDRAW Graphics Suite X6Custom Data
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawCustomMediaStrokes
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawGMS
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresets
C:Program FilesCorelCorelDRAW Graphics Suite X6DrawWorkspace
C:Program FilesCorelCorelDRAW Graphics Suite X6Programs64Addons
Is there anyway to move the default locations, perhaps by a registry hack? I'd like to move it, at least to the AppData folder or even to another drive where it is easier to backup/make changes.
I'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies View RelatedI am trying to do this tutorial: [URL]....... but I have a trouble at Step 3 : Creating Web Header - rather: Now go to the " Shape Tool ", double click on the bottom middle line to create a custom node / corners.
View 7 Replies View RelatedI'm trying to figure out how to accurately display the current rotation angle of an object in DRAW X6. Based on my drawing precision settings, the angular accuracy is there, but it's not properly displayed.
IE - If I type in 5.05 deg rotation, it will DISPLAY 5.1 but will actually be 5.05.
Is there a way to update the display to show more than one decimal place for rotation?
I have a client who is waiting for a flyer design i did. So i created a christmas flyer. It looks nice with christmas colors and all. When i go to convert it into a jpeg in photo paint, the green changes to lime green and the other colors change as well. To florescent vibrant type. This just started happening recently. When i played around with settings, i saw something about RGB, CMYK (which dulls everything).
View 13 Replies View RelatedWhen I copy and paste a block of text, and then use the x and y coordinates to move it into position, the text characteristics change. It becomes all caps, and italicized text becomes non-italic. This happened with both Perpetua and Stone Sans.
View 7 Replies View RelatedWhen i scan an object i cannot alter the colour when using X5.
View 3 Replies View RelatedI seem to vaguely recall a method from some vector drawing program where you can press or hold ctrl or alt or shift and change the next type of node you will draw while using the bezier tool, or the pen tool, or the multi-line tool.
Is there any way to do this in 12, or use VBA to make it happen. I really just need to switch back and fourth between cusp and symmetrical.
Recently, I'm finding the size of the drop down menu text too small. Is there a way to increase the text size?
View 3 Replies View RelatedBeen a CorelDraw user for a long time. Just installed x6 (previous X4), and tried to export an image to jpg. X6 seems to have this dialog box with all these presets. How do I manually set my resolution, pixels, etc. as in the previous versions?
View 4 Replies View RelatedIs it possible to change the color profile of a document after you've created it?
View 2 Replies View Relatedit is possible to change the background color of the application window ?
I would like the whole area outside the drawing window (the drawing page) to be grey, so that it can be clearly distiinguished from the actual drawing page, which is white, with a shadow line around the drawing page.
I've been using Corel Draw! 8 for years and my favorite tool was the angle of rotation. For example, I would select an object, usually a rectangle that has the point of rotation at end of the narrow rectangle. As I rotated it, I could see how much the angle of rotation in degrees is. Therefore I could type a value in the box and the rectangle would rotate some many degrees. Fast forward to my Corel Draw 12. Now when I click on the same object, the box will display what the angle is in degrees already based on the circular angle startingaat the nine o'clock position. I need it to say ZERO and I can't find the setting to set it at zero
what I am drawing is I rotate a narrow rectange and basically creating a dial face for instruments.
The company i work for has full dye sublimated uniforms. our customer base would really like to use photographs on their shirts but we are unable to control the colors. We have a color palette that our factory uses to color match everything. how do i change colors in photoshop (channels) to match our color palette in corel so that there is consistency and the images don't appear washed out or flat.?
View 1 Replies View Relatedhow to take a jpg or gif file and change the colors of the image? I am having difficultly doing so. It is our company logo which is in 2 colors and I merely want to change it to white.
View 9 Replies View RelatedI have taken some pictures with my camera, I cannot adjust the white balance of the camera, so the pictures come out with a slight grey background. I want to change that to a white background.
View 12 Replies View RelatedI'm using corel draw X5, I can't move object if I select "Traditional CorelDRAW" option for ctrl/shift keys, under Pick Tool menu in options window.
If I choose "Windows Standard", I'll be able to move the objects. But I don't like this behavior, because the way it draws new objects, anchoring them in center, instead of upper left corner.
This bug started just after I change this option, "just for curiosity". I wish I never discovered it. How can I solve it? I want to set ctrl / shift behavior to "Traditional CorelDraw" AND be able to move objects.
I have a patern, I need to move, I know in advanced I can more it with Origin, but I have to close and open the window.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
When I select Export HTML., and click the Browser preview, Corel Draw X6 selects MS Internet Explore which is not my default Browser.
I've checked Tools | Options and Export HTML, and searched the forums, but can't find out how to default to either Firefox or Chrome.