AutoCAD Inventor :: Break View At An Angle
Jun 25, 2012Any trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Pass Break From Sectioned View To Separate Isometric View
Jun 27, 2012I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Make Exploded View Trail Lines Exempt From View Break Out?
Oct 31, 2013I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedAutoCAD Inventor :: Isolate Areas Of View Break?
Mar 5, 2013is there any way to control which areas of my part or assembly that I want to use the View Break on? Currently I'm not aware of any options. It wants to break through the entire assembly or part view.
Basically I have a coworker who designs his electrical harnesses in Inventor. Some of the wiring branches off the main harness are longer than others and he would like to break only that specific branch of wiring, not the entire horizontal or vertical area of the view.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
AutoCAD Inventor :: Propagate Break To Parent View
Sep 12, 2013How do you turn off the default check for "Propigate to parent view" when creating a breal in a drawing view. I have never had the need to use this option yet it is checked by defalt.
View 8 Replies View RelatedAutoCAD Inventor :: Broken View Break Lines?
May 5, 2006I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 Replies View RelatedAutoCAD Inventor :: Drawings - Break View And Parametric Parts
Oct 25, 2012I have a parametric assembly and some of the parts in this assembly require a "Break". When the part dramatically reduces in size the part view disappears as the part is now located in the "Break". Delete the "Break", re apply the "Break".
I would like to be able to constrain a Break to the part, either a sketch on the view or maybe from Workplanes in the part.
AutoCAD Inventor :: 2013 Crashes During Break Out View Creation?
Aug 7, 2012I just installed Inventor 2013 (First Mistake) and when I attempt to creat a breakout view, Inventor crashes. The folks at Autodesk are blaming this on my machine running multiple threads. Aren't all modern computers supposed to be running multiple threads?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Rotate Break View - Not Horizontal Or Vertical
Jun 25, 2013I can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
AutoCAD Inventor :: Detail View Break Line Weight
Aug 31, 2012What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Section View Inherit A Break Out
Oct 6, 2013I have a view of an assembly where I used a break out to break through a part. I want to make a section of this, and have that view respect that the part was broken and show it as broken in the new view.
The section view shows the full part 100% unbroken. In the edit view, the only option for cut inheritance is "break". All others are greyed out.
Why I want to do this: I am unable to break it in the section view because there is no option to break through a single part a specified distance. I cannot break an area "from point" or "to sketch" because they don't let you choose a single part for the effect, and the parts completely included in the break out this way are not going to show up in the parts list, so you cannot adjust their section participation, therefore I also cannot just break an area and then choose what parts don't get the effect.
AutoCAD Inventor :: Break Out View Glitch With Frame Generator Components?
Feb 15, 2013When creating a break out view on a top level assembly that includes frame generator components, the break out function does not break these parts out. I know it is working because the non-frame generator parts are disappearing and being broken out as you would expect but the frame generated parts seem to be immune to the command. is this a common fault or something wrong with my particular model?
View 2 Replies View RelatedAutoCAD Inventor :: Control Break Size In Drawing View Using ILogic?
Feb 24, 2011is there any way using iLogic or other method to automatically control the size of the 'break' in a drawing view? I have built a model which uses iLogic to control virtually everything, however the large variations in the length of the product mean that there are some interesting results when it comes to the broken drawing views updating.
it would be nice to locate the break at the absolute center of the view and then size it as a percentage of the view size along one axis or perhaps according to some other length based rule.
Dell Precision M6400 - C2D 2.66 / 8gb / Quadro FX3700M / Win 7 Pro x64
AutoCAD Inventor :: How To Show Thread Boundaries In Section Or Break Out View
Oct 1, 2013I want that a section parallel and through a threaded hole will show the double lines of the thread.
Now only a hole is shown
AutoCAD Inventor :: Sketch To Create A Break Out View In One Type Of Drawing
Sep 9, 2013I use the same sketch to create a break out view in one type of drawing. I may be blind, but I can't seem to find a way to save that sketch and reuse it when I want to create a break out view.
View 4 Replies View RelatedAutoCAD Inventor :: Use Rotate At Angle Command Outside Of Custom View Environment
Oct 1, 2012Is there any way to use the "Rotate at angle" command outside of the "custom view" environment?
Is there actually any technical reason why the controls in the attached screenshot are not available in the Studio and normal modelling environments?
AutoCAD Inventor :: Make One Angle Half Of A Driven Angle
May 26, 2013I have used a driven contraint in a sketch.
Can that also be done in an assembly?
In one assembly I want to make one angle half of a driven angle.
AutoCad :: Three View First Angle Projection Of Image
Sep 20, 2011I found this image in a textbook and it's supposed to be a three view first angle projection of the boat. It looks like main view is a plan view (top).
What confuses me about this is that the left view, looks like it's of the left side. But only third angle projections order views this way (left view being of the left side, top view being of the top, right view being of the right). So is this picture a first angle projection or a third angle? Or is it all together wrong?
AutoCAD 2010 :: Top View - Objects Look Distorted Like They Are On Angle?
Aug 7, 2012I am in top view but my objects look distorted like they are on an angle?
View 2 Replies View RelatedAutoCAD .NET :: Find Rotation Angle Of Current View
Feb 3, 2012I'm looking to find the current rotation of my view in modelspace.
This isn't the ucs direction but any arbitrary view i'm using.
For example using 3dorbit to rotate around an object.
I want to match some temp graphics to align flat to my view.
I see there is a VIEWDIR variable. so that may be what I need.
AutoCAD Visual LISP / AutoLISP :: Break To Break At Point Command
Mar 19, 2010Is it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.
Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.
To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.
Revit :: Viewport Doesn't Break Up Like View Region
Feb 10, 2012So I've created this wall section and used viewbreaks to break the crop regios up so i can fit the final view on a sheet.The problem is, when I place the broken up section on a sheet, the viewport does not break up like the view region.
How do i break up the viewport on the sheet so I can squeeze the visable regions together?
AutoCAD 2013 :: Get View Twist Angle To Match Line Exact?
May 22, 2012How can you dview / twist to get the view twist angle to match a line exact?
I can enter an angle but the angle of my line is not to an exact degree or degree decimal. 2013 Civil 3D
AutoCad :: Draw Layout For Simple Angle Iron Part Using Front / Side And Angled View
Apr 25, 2011Im currently trying to draw a layout for a simple angle iron part using the front, side, and angled view. Its a flat part made of sheetmetal and it will get 1 90* bend in it.
My first question is how do i bend a part in autocad LT 2011? Ive been using autocad for years but ive never had a request for an angled view.
My second question is how would i create a layout using all 3 views and include the info block in the bottom right displaying all the info?
Photoshop :: Angle Point Of View
Apr 12, 2009How to change the perspective of a picture so it looks like you are looking on it from an angle?
Im using photoshop 7.0 and, if necessary, have access to photo CS2.
3ds Max :: How To View Rendered Image At Specific Angle
Sep 5, 2011After I have created the whole 3D image using autodesk 3ds max, there is an option to view it at any angle like front,left,right etc. or I can view at any random angle by using the mouse. But how do I view the rendering at a particular angle like 15degree or any angle specified by me. I am an amateur in using autodesk.
View 4 Replies View RelatedAutoCAD Inventor :: Break Association To BOM?
Aug 21, 2013I'm using Inventor Pro 2011 and I'm trying to break the association of a BOM from it's assembly. My company uses a "next assembly list" on each drawing to show the quantities and information that appear on the BOM in the next level assembly. To achieve this we insert a parts list referencing the next level, then we turn off the visiblity of all the parts except the item we want shown. The problem we've found with this is that we're using some large assemblies and Inventor slows down when it has to reference the large assembly on each drawing. All we really want to show is the single line. If we break the link to the large assembly, we feel that it will speed up the process considerably.
View 5 Replies View RelatedAutoCAD Inventor :: Dimension Break In Idw?
Dec 21, 2011How to Create a dimbreak like Autocad in Inventor idw
View 2 Replies View RelatedAutoCAD Inventor :: Use Break-out Command In IDW
Feb 15, 2012Is there anyway to use the break-out command in an IDW to show something inside an enclosure that you normally would not see? I don't mean a section view but an Isometric view that temporarily removes a part of the wall of an enclosure so you can see what is inside, specifically in a presentation view?
View 5 Replies View RelatedAutoCAD Inventor :: Break Sheet Numbers In IDW?
Jan 17, 2013I have several sheets w/in a drawing. Some of the sheets are titled sheet 2A, 2B, etc. I'd like to be able to do this w/o needing several title blocks. what becomes sheet 3 is now sheet 5. How do I offset the sheet numbers?
View 2 Replies View RelatedAutoCAD Inventor :: Break Bolted Connection
May 27, 2013Is it possible to break my bolted connection, so that i can change the information given by inventor in the BOM? Its always grayed out and i can`t seems to find a way to make it "ungrayed".
I could change it directly on the .idw but me and my project leader would like to not go on that road. Our teams are seperated in to two. Ones in charge of modeling & the other is in charge of the presentation. We would like to give, as much as possible, not to much leeway on those in charge of the presentation.