Photoshop :: Angle Point Of View
Apr 12, 2009How to change the perspective of a picture so it looks like you are looking on it from an angle?
Im using photoshop 7.0 and, if necessary, have access to photo CS2.
ADVERTISEMENT
Illustrator :: Convert Anchor Point To Right Angle?
Jan 21, 2014I would like to select an anchor point and adjust it so that it creates a perfect right angle. How can I do that?
Imagine some closed, filled shape, made up of a dozen anchor points. I would like to select one of those anchor points (a corner anchor point, not a smooth anchor point), and adjust it (built-in function? script?) so that it create a perfect right angle (90 deg.). This essentially would mean moving it to just the right spot so that the lines connecting it to its two neighbouring anchor points would form a right angle.
do not assume that the resulting right angle would necessarily be orientated along a North-South axis, or any other rational compass direction.
Paint.NET :: Drawing Line Using Start Point And Angle
Oct 19, 2012When I draw a line, is there a way to say, "Start at point (864,0), go exactly 270° down (actually, I can hold down the shift key for that, but I digress...) and end at the other side of the canvas at point (864, 3456)?
A script would probably work well, but I've never dipped into that.
AutoCAD Inventor :: Bend Angle Macro Decimal Point (VBA)
Dec 11, 2013I have a short macro to add the compliment angle to all the bend angles on an Inventor 2014 drawing. I want it to always show one decimal point on the compliment angle, but if that would be '0' then it doesn't show it. I.e. in the attached picture I want it to be 58.0 (122.0) DOWN.
Sub Test()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oView As DrawingView
Set oView = oDoc.ActiveSheet.DrawingViews(1)
Dim oNewDimStyle As DimensionStyle
Set oNewDimStyle = oDoc.StylesManager.DimensionStyles.Item("RASOR")
[code]....
AutoCAD Visual LISP / AutoLISP :: Angle Of Polyline Segment At Specified Point
Mar 19, 2013I am writing a routine that will place a piece of text at a specified point along a polyline. My problem is to determine the angle for the text. It needs to be the same as the segment of the polyline that it falls on. Just can't get my head around how to get that angle?
I can get a list of the vertex point of the polyline, but how do I determine the segment the point falls on?
3ds Max :: How To View Rendered Image At Specific Angle
Sep 5, 2011After I have created the whole 3D image using autodesk 3ds max, there is an option to view it at any angle like front,left,right etc. or I can view at any random angle by using the mouse. But how do I view the rendering at a particular angle like 15degree or any angle specified by me. I am an amateur in using autodesk.
View 4 Replies View RelatedAutoCAD Inventor :: Break View At An Angle
Jun 25, 2012Any trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.
View 3 Replies View RelatedAutoCad :: Three View First Angle Projection Of Image
Sep 20, 2011I found this image in a textbook and it's supposed to be a three view first angle projection of the boat. It looks like main view is a plan view (top).
What confuses me about this is that the left view, looks like it's of the left side. But only third angle projections order views this way (left view being of the left side, top view being of the top, right view being of the right). So is this picture a first angle projection or a third angle? Or is it all together wrong?
AutoCAD 2010 :: Top View - Objects Look Distorted Like They Are On Angle?
Aug 7, 2012I am in top view but my objects look distorted like they are on an angle?
View 2 Replies View RelatedAutoCAD .NET :: Find Rotation Angle Of Current View
Feb 3, 2012I'm looking to find the current rotation of my view in modelspace.
This isn't the ucs direction but any arbitrary view i'm using.
For example using 3dorbit to rotate around an object.
I want to match some temp graphics to align flat to my view.
I see there is a VIEWDIR variable. so that may be what I need.
AutoCAD 2013 :: Get View Twist Angle To Match Line Exact?
May 22, 2012How can you dview / twist to get the view twist angle to match a line exact?
I can enter an angle but the angle of my line is not to an exact degree or degree decimal. 2013 Civil 3D
AutoCAD Inventor :: Use Rotate At Angle Command Outside Of Custom View Environment
Oct 1, 2012Is there any way to use the "Rotate at angle" command outside of the "custom view" environment?
Is there actually any technical reason why the controls in the attached screenshot are not available in the Studio and normal modelling environments?
AutoCad :: Draw Layout For Simple Angle Iron Part Using Front / Side And Angled View
Apr 25, 2011Im currently trying to draw a layout for a simple angle iron part using the front, side, and angled view. Its a flat part made of sheetmetal and it will get 1 90* bend in it.
My first question is how do i bend a part in autocad LT 2011? Ive been using autocad for years but ive never had a request for an angled view.
My second question is how would i create a layout using all 3 views and include the info block in the bottom right displaying all the info?
Illustrator :: Keeping Angle Of Direction Line While Dragging Direction Point?
Mar 19, 2014I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
Illustrator :: Shortcut To Draw A 45 Or 90 Degree Angle From Drawn Line On Angle?
Nov 13, 2013Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
AutoCad :: Change Default Drawing Angle From 30 Degrees To Another Angle?
Oct 15, 2008Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies View RelatedAutoCad 2D :: Rotate An Object To Match An Angle Without Knowing The Angle?
Oct 5, 2011Is there a quick way to rotate an object to match an angle without knowing what the angle is? I am using AutoCAD 2011 now. I was using 2007 and I had an add on command the would rotate an object using a base point and picking the two lines that make up the angle, and it would match the angle you wanted. I can not get that command to load in 2011.
View 4 Replies View RelatedAutoCad :: Rotation Angle Doesn't Match Angle Inquiry
Jul 25, 2012I have a property line that is N 36d19'52" E but needs to be N 12d52'18" E. The obvious and calculated rotation angle would be 23d27'34" but when I rotate the line by the calculated angle it doesn't rotate to the right angle. It's off by 0d11'10"!? When I draw a line by bearing at N12d52'18" E and inquiry the angle between the property line and the drawn line the angle difference is in fact 23d27'34".
View 1 Replies View RelatedAutoCad :: How To Read Angle Of Line And Insert Block To That Angle
Feb 11, 2011Let's say I am inserting a square block into a dwg and want to get it parallel to an existing angled line. Do I have to read the angle of the line and insert the block to that angle or is there a quicker way?
View 6 Replies View RelatedAutoCAD Inventor :: Make One Angle Half Of A Driven Angle
May 26, 2013I have used a driven contraint in a sketch.
Can that also be done in an assembly?
In one assembly I want to make one angle half of a driven angle.
AutoCAD VB :: DXF ELLIPSE Relationship Between Actual Angle And DXF Angle
Jul 6, 2013how to convert "real world" angles of elliptical arcs into those shown in a dxf file?
Say that I have drawn an elliptical arc with its start angle on 210 degrees and an end angle of 324 degrees. The values in a DXF file, for an elliptical arc, have something to do with the contant "PI" (3.14159). I know that a full circle is 2*Pi but how to do this with elliptical arcs!!
AutoCAD 2013 :: 2 Point Perspective View Of Model
Jul 9, 2013Im currently trying to set up a 2 point perspective view of a model ive recently designed.
I have an image set as the background and i would like to align the model in perspective to the image.
My issue is Dview and free orbit and giving me any kind of reasonable perspective.
Is there any other methods i might be able to try to improve the results ?
AutoCAD Inventor :: Unable To View Point Clouds?
Jan 27, 2012We'll get a inventor model of the huge cover . And we need to do a cross check old model to new scanned point clouds.
Inventor is not able to view point clouds, so the idea is to import inventor model to autocad . Do a cross check to point cloud notice the changes and put them into the inventor model . Move the flanges in the correct position.
This is the client mail.
iam not understanding this mail. Presently iam using autodesk inventor 2012 .
what is point clouds?
i know little bit of point clouds.
how to start this work. Client is provided scan files.
AutoCAD 2013 :: Cloud Point With Aligned View?
Jan 10, 2013I have a problem with the management of the cloud of points with autocad 2013. and precisely:
- What is my need: using orthogonal views create section planes of small portions of a cloud to be scanned.
- What is my problem: When I align a view, the bounding box is not aligned to the same, so this involves a wrong cut plane to create the section
AutoCAD Civil 3D :: Project Point Group To Profile View?
Apr 12, 2012Project objects to profile view... got it. No problems selecting individual survey points or survey figures and projecting to profile view. Is there a way to project a entire point group to a profile. I have a point group created for the large number of points to be projected. Next I right click on the point group and click "select'. Then go to Project objects to profile view. Nothing...
This process works for the survey figures, but not the point groups! In prospector tab go to survey > figures then select CTRL + each figure to project then VIOLA' the whole group of figures are projected.
Is this limited to graphical selections only? If so, is there a workaround to generate a graphical selection set from the point group.
Using C3D 2010 on Win 32bit platform
AutoCAD Civil 3D :: Projecting Objects To Profile View And Showing Point Of Intersection
Nov 11, 2013Say I'm projecting some 3D polylines to a profile view I have, and the 3D polylines cross the alignment defining the profile view. Is there a way to format the projections such that the point of intersection is identified, and that the points will be updated if I change either the alignment or the 3D polylines?
View 1 Replies View RelatedAutoCAD Civil 3D :: Angle-distance With Vertical Angle And Distance
Nov 19, 2012I would like to draw a smiple line using the transparent command 'AD (angle-distance).
My distance is not horz., so I want to enter the Vertial angle and the slope-distance, in LLD the command was AD VD.
So how do you do this in Civil 3D 2012.
Photoshop :: Vanishing Point - Shape Modification - Point Selection
Jul 6, 2013As a beginner i'm learning day by day how to use photoshop. Among the functions i 'd like to handle with there's the vanishing point (in the filter menu). However i can't modify the angles of my selection to change the perspective grid.
Take a look on this video at 03"57 (it is what i want to do): [URL] ...... Do i have to set something up before.
Photoshop :: Stretch Point In Image And All Pixels Follow That Point?
Mar 28, 2012Is it possible to drag/move a point in an image so that all imaginary lines emanating from that point remain emanating from that point? Something like what's shown in the attachment.
View 3 Replies View RelatedAutoCad :: Design Walking Track 1 Mile From Starting Point And Finishing At The Same Point
Aug 16, 2011I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies View RelatedAutoCAD Inventor :: Setting Up Point On Different Layer To Mark Center Point Of Circle?
Nov 15, 2012I need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View Related