How can you dview / twist to get the view twist angle to match a line exact?
I can enter an angle but the angle of my line is not to an exact degree or degree decimal. 2013 Civil 3D
Is there a quick way to rotate an object to match an angle without knowing what the angle is? I am using AutoCAD 2011 now. I was using 2007 and I had an add on command the would rotate an object using a base point and picking the two lines that make up the angle, and it would match the angle you wanted. I can not get that command to load in 2011.
View 4 Replies View RelatedI have a property line that is N 36d19'52" E but needs to be N 12d52'18" E. The obvious and calculated rotation angle would be 23d27'34" but when I rotate the line by the calculated angle it doesn't rotate to the right angle. It's off by 0d11'10"!? When I draw a line by bearing at N12d52'18" E and inquiry the angle between the property line and the drawn line the angle difference is in fact 23d27'34".
View 1 Replies View RelatedLet's say I am inserting a square block into a dwg and want to get it parallel to an existing angled line. Do I have to read the angle of the line and insert the block to that angle or is there a quicker way?
View 6 Replies View RelatedI am trying to create a solid model of a helical gear and need to know how to include a rotation or twist with the extrusion.
View 2 Replies View RelatedWe meet a strange problem that all the line and cirele are twist as display. copy this file to another machine, or another version of AutoCAD, the problem still exist.
is thare a system value to control display effects?
i would like to rotate an object to match the angle of another. I can measure the angle but there are many decimal points and I want it to be exact.
One method i have employed is to change the ucs - z setting to align with the object to be rotated then click it and select a point that intersects the other object (this case a line) and then the 2nd snap is somewhere along the line.
this works although sometimes i have to rotate a second time 90 deg. or 180 to get proper orientation.
Is there method, or hidden snap?
ACA2011 Win 7
How is it possible to view the line thickness that you have set at the drawing surface? before you polot. I mean drawing and working with the actual line thickness that you set for the layer? and i do not mean using pline
View 4 Replies View RelatedI have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
In solidworks there's a "hidden line" option that displays a 3d part with all its sketch lines (instead of a regular solid) which allows the user to view all the different sides of the part easily. So I was wondering if there's such an option in autodesk inventor 2013. Currently, to view all the different sides and aspects of a part easily, i have been changing the part's material to polycarbone or some other plastic material; this makes the part a little translucent. But this is less effective than the hidden line vew availble in solidworks. method that makes different parts of a 3d part more easily to be viewed?
View 1 Replies View RelatedI have 3d model made in autocad. I rotate it to get some aksometric view and select view->hide. Is it possible to plot this exact view into dwg... so that i can insert it to my 2d plan sheet in model space.
I don't use viewports, because they are so slow and clumsy.
I have a viewport in a layout that shows a part of my model. I'm gonna create a number of layouts exactly like the first one, only having the viewports move their display a number of units along the x-axis. Is there a way to make this offset along the x-axis exact, or is the only way to enter each viewport and "manually" adjust the position?
View 5 Replies View RelatedI have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies View Relatedangle.jpg
How can I draw the bottom line, with an angle of 132 relative to the middle line?
How to draw a line that STARTS at a perpendicular angle to another line ???
View 4 Replies View RelatedI don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
I have to draw a rather weird drawing with a lot of angled lines. Currently I'm using UCS to draw them but it's really tiresome.
I would draw 1 line, then type in UCS, select the X and Y axis, draw that line, escape, then hit in UCS again, rinse and repeat.
Is there a simpler way? I tried polar tracking "relative to last segment" but it still uses the x axis as the base, which is not what I want. I want the line to be the X axis.
I would like to draw a line that is a specific length, lets say 16, that originates from a specific x,y location say 10,23, that terminates at exactly atleast the y coordinate 38. I don't care about the x or the angle.
View 9 Replies View RelatedI am new to AutoCAD and I want to draw something in it, I have taken screen shot of a google map and placed it in AutoCAD, Now I want this map to be scaled proper size, for example I have 880meter x 330meters but placed object is only 20' x 15'.
How can I resize it or how can I make my drawn line to be exact 880meters ? ( I will resize my picture according to my drawn line).
Is there a way to dimension in AutoCAD LT?
For example: I draw a line and when I dimension it, it comes up as 9.32, but I want that line to be 5.1. Is there a way to dimension this line? Is there code that I should be familiar with? I need the line to be exact dimensions, not just change the number.
The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec.
it's been awhile since I have been back to autocad. I draw a line an exact length then when I try to dimension it with a fraction it rounds up. I can't find the setting. It is say 5 1/2" but will dimension to 6"..
View 7 Replies View RelatedI'm trying to reconcile 3ds max's FOV camera settings to the settings I am presently using in Resoft Windfarm (a program which I use by imputting co-ordinates and height of a camera point and then specifying a horizontal FOV, which gives a real life viewpoint at the exact horizontal field of view that would be seen in reality.)
I'm currently setting the units to metres, importing my terrain at 1:1 and positioning modelled elements at 1:1 on top of the terrain in the correct 'co-ordinate' position, using the UCS with the exact 6 figure co-ordinate points. I am positioning my camera the same way, at the correct height and exact rotation, but when I specify the horizontal FOV it looks much smaller than it does in windfarm, like the field of view is not the same? I'm pretty new to 3ds max
I am working with one Landscape drawing, In this Dwg I splited that hole area as 128 sheets.Now I have to set view port for every sheets (128 nos.) . The problem is, I have to mention that surrounding sheet numbers for the specific sheet, which showing in the view port.What should i do to change the surrounding sheet numbers as automatically?
View 9 Replies View RelatedFor some reason my angles are all way off. I type line 3<65 and it goes nowhere near 65 deg. My coordinate system is normal. I attached screen shot.
you can see command line on bottom and line not at 65 deg.
weird angle.jpg
way to draw a line down the exact center of an image, and possibly make the line look cool. I'm trying to create a custom Magic the Gathering playmat thing for a program for testing decks out.
I tried the line tool, but it doesn't seem to allow you to fill it in with the paintbucket after, or do anything with it for that matter. I just want a cool looking divider.
Then I might create another split into 3 sections vertically for 6v6 battles, any way to measure this out automatically?
Any trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.
View 3 Replies View RelatedI found this image in a textbook and it's supposed to be a three view first angle projection of the boat. It looks like main view is a plan view (top).
What confuses me about this is that the left view, looks like it's of the left side. But only third angle projections order views this way (left view being of the left side, top view being of the top, right view being of the right). So is this picture a first angle projection or a third angle? Or is it all together wrong?
Trying to make a rotateable block with non-rotating text (i.e. full-time "match orientation to view" text).
C3D2010
Win 7
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST