Illustrator :: CS4 View Doesn't Match View Of Same File In Acrobat
Apr 11, 2013
The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec.
View 3 Replies
ADVERTISEMENT
Apr 11, 2013
My customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
View 5 Replies
View Related
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
May 14, 2013
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
View 4 Replies
View Related
Sep 27, 2013
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
View 3 Replies
View Related
Mar 11, 2011
When I go to customize and drag "View image file" to a toolbar, although it says "view image file" on the toolbar it is in black, and doesn't work when clicked on. This is the case on at least 2 entirely different systems.
View 1 Replies
View Related
Mar 20, 2013
After a support call, I've lowered the brightness on my imac OS 10.6.8 but the prints are darker than ever.
I've calibrated. The printer is an Epson 4900. Photoshop is managing the colors. I did not download the no color management app.
View 7 Replies
View Related
Apr 14, 2013
I've noticed recently that when I use the EXPORT command to create a JPEG, the resulting image colors of the EXPORTed JPEG are deeper (certainly more saturated) and the contrast over the entire image is much higher. The image looks nothing like what it looks like in GIMP prior to export.
I've tried EXPORTing to TIFF and I get the same results (JPEG looks exactly like the TIFF, just a different file size). Is it a possible ICC Profile mismatch (i.g. not having one set specifically inside GIMP)?
View 3 Replies
View Related
Mar 7, 2014
I'm trying to color match two shots and I'd like to be able to view them side by side while I adjust the colors in one of the shots. It seems like a good way to do this would be to view two program monitors side by side - but is that possible? I can't see that option anywhere.
Using the source monitor for comparison doesn't make sense to me as I've already color corrected the reference shot and the source monitor shows the original footage (ie. the wrong colors). I could of course try to match the shots based on the source footage of the reference shot and then apply a second color correction but that seems a bit unnecessary to me.
Or - I remember that in FCP7 there is an option to use split screen while color correcting two view two shots simulatenously side by side in the same screen/monitor. Is there anything like that hidden in PPro?
View 4 Replies
View Related
Mar 8, 2012
Trying to make a rotateable block with non-rotating text (i.e. full-time "match orientation to view" text).
C3D2010
Win 7
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 6 Replies
View Related
Jan 24, 2014
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
View 5 Replies
View Related
Sep 16, 2013
I opened a PDF file that is in landscape and it shows up in portrait view, so I can't edit it easily, since it is sideways. How can I change the vew?
View 2 Replies
View Related
May 22, 2012
How can you dview / twist to get the view twist angle to match a line exact?
I can enter an angle but the angle of my line is not to an exact degree or degree decimal. 2013 Civil 3D
View 7 Replies
View Related
Aug 26, 2013
How can I view an AI file created on a MAC on a PC without corrupting the original fonts? An AI file was created with an image and text on a MAC. When the AI file was opened on a PC, the text fonts were not the same as originally created. Also, the same AI file was saved to PDF on the MAC. When the AI file was opened on a PC, there wasn't anything visible.
View 3 Replies
View Related
May 29, 2013
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstation is the ability to select and open an external DGN reference, and then match the view of the parent DGN, called the "EXCHANGE" command. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experiment with lisp or script and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, I have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature. I hesitate using the REFEDIT, which works fine for regular AutoCAD, but not so much for Civil 3D and the objects it creates (labels and other items with data shortcuts).
View 2 Replies
View Related
Mar 9, 2014
I created my resume with horizontal lines to divide the sections, work history, education for example. When I exported the file as a PDF, it opens beautifully in Adobe Reader. However, when I open it on my iPad or iPhone, those lines are missing! What can I do to make those lines appear when I am viewing on my iPad?
View 1 Replies
View Related
May 28, 2013
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstaiton is the ability to select and open an external DGN reference, and then match the view of the parent DGN. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experienting with lisp or scipt and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature.
View 6 Replies
View Related
Jan 25, 2014
When I import a particuar video clip into premier, there is a problem with the audio. It plays absolutely fine until 9 minutes through when all of a sudden the audio loops back to the beginning. The video carrys on as normal untill the end of the clip but the audio starts from scratch. I have tried removing the video, renaming, moving location, starting a new project, but no matter when or how I play the video the audio starts again 9 mins through! The video plays fine in any media player except premier. I have tried exporting the video but unfortunately the audio error also gets exported. The clip is crucial to a video I'm making and can't be re-shot!
View 1 Replies
View Related
Sep 4, 2013
Trying to create a dynamic block that will multiply the number of neutral and ground blocks as it's stretched.
My power terminal strips can contain 1 to unknown number of circuit breakers, and each circuit breaker requires a neutral and a ground block.
All the similar items in a stip are grouped together, all the circuit breakers, then the neutrals than the grounds.
So depending on how many circuit breakers I have I'll need the same number of neutrals and grounds, but grouped together.
In the attached block I added the stretch action to move the end cover and end stop of the strip down, but don't know how array/space/stretch the neutrals and grounds so they're grouped together.
The ciruict breakers aren't shown as they can be from different manufacturers and therefore different widths.
Tried attaching my block file but get this error message:
"The contents of the attachment doesn't match its file type."
View 9 Replies
View Related
Jul 8, 2013
Here's the screen shot. If I ignore the preview, and set with the print area tool, I get what's in the print area tool. Something is amiss in the land of tiling settings, but I can't get to whatever setting is messing this up.
View 1 Replies
View Related
Oct 19, 2013
I made an assembly, inserted a bolt and saved it to another file for thee modifications i make in the screw.
I try to make a section view with one of the origin planes, but it doesn't make
View 6 Replies
View Related
Sep 12, 2012
I do need to display the correct surface side to varify if any surface normal is wrong sided. But all the time surfaces are displayed in the force 2-sided mode, although the setting is off. I use the Nitrous driver but tested it also on all other drivers whithout success. Older 3dmax versions doesn't have had this problem on the same machine. See the attachment where I added the renderer where the object is displayed correctly. How can I get the result within the viewport?
View 1 Replies
View Related
Feb 10, 2012
So I've created this wall section and used viewbreaks to break the crop regios up so i can fit the final view on a sheet.The problem is, when I place the broken up section on a sheet, the viewport does not break up like the view region.
How do i break up the viewport on the sheet so I can squeeze the visable regions together?
View 2 Replies
View Related
Nov 18, 2013
by default. I forget what but there's some routine to make this family cut properly in a plan view. Why they made viewing the top of the family the default position I DON"T KNOW but what do you expect from programmers?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 7 Replies
View Related
Jun 22, 2012
When I switch from 2D top view to an isometric view my cursor disappears. This is a completely new drawing file so maybe something is not set right.
View 3 Replies
View Related
Oct 7, 2013
how do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies
View Related
Jan 15, 2013
Why doesn't Selecting clips in the "Timing" view in CFX reveal which clip it is the Schematic? I realize there is a very small corresponding number, but a nice yellow surround would be nice.
View 4 Replies
View Related
Apr 28, 2012
After renaming, I have to deselect and reselect images to have the filename update.
View 1 Replies
View Related
Jan 27, 2014
When I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
