So I've created this wall section and used viewbreaks to break the crop regios up so i can fit the final view on a sheet.The problem is, when I place the broken up section on a sheet, the viewport does not break up like the view region.
How do i break up the viewport on the sheet so I can squeeze the visable regions together?
I have some sections and am using the break line with a masked region but in Revit 2013 the masked region only works in the Wireframe Graphics display option. It does not work in the Hidden Line display. It was fine in 2012
View 7 Replies View RelatedIs it possible to add a color region to a family in plan view? I need to add a color region to the plan view of a single flush door family for training purposes (several co-workers see color filled areas better than black and white single lines with the projector we have). I would like to add a color region to the door and frame in plan view of the door family.
View 1 Replies View RelatedI have exhausted search efforts for only one filled region type allowed in a detail view.
What is strange, this trash enclosure wall displays the plan view filled region (referenced via callout), but when I try to show a hatch for concrete and a hatch for metal door, in elevation, the filled region changes "all" filled regions to what ever is chosen.
Then I tried a new circle to see if that changed things. same deal
by default. I forget what but there's some routine to make this family cut properly in a plan view. Why they made viewing the top of the family the default position I DON"T KNOW but what do you expect from programmers?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
When I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedWhen I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedI have a large Revit model with a linked model containing many notes and symbols. The problem that I am having is that since the structure is so large I need many blow-up plans for particular zones, even though these plans are using crop regions the notes from the linked file still show outside the cropped area?
Is there any work around for this ? I have looked into scope boxes, section box, and plan regions but none of these will solve the problem.
I have a furniture object within which I have a filled region, is it possible to turn this off in a particular view?
Object attached.
I have an annotation tag which has a colored title bar using a colored region as a background to the title text. However having created a standard drafting detail in a 'Standard Details' project, using one of these annotation tags, when copied into a new project the color is replaced by black losing the title text in the background.
View 5 Replies View RelatedI have made crop region lines to be heavy lines on elevations and it shows heavy lines on my monitor . When I created PDF file or print preview, it does not show any heavy lines of crop region lines.
View 1 Replies View RelatedI have been working on a few projects where the site plans are done by the Engineer in AutoCAD. They are campus-sized site plans so to re-create them in Revit would be too time consuming. So, I am linking them into my model.
So, what I have been doing is creating several masking regions around the perimeter of the site plan in Revit in order to 'crop' the sites as necessary - I do not want to create several different site plans in CAD and bring them in separately as to avoid multiple updating when the site changes).
Is there an 'inverse' masking region where the outside of the masking region is what masks instead of the inside of the enclosed masking perimeter?
We are trying to take advantage of non-rectangular crop regions and running into an issue. We are placing (2) views with non-rectangular crop regions on a sheet, one view shows existing geometry in a linked model and the other view shows new geometry in the model the sheet resides in. As a side note, we are doing this to create simplified diagrammatic phasing plans, the merits of which should be another topic. What seems to be happening, is the graphics within the rectangular boundary of the view, but outside of the crop region is masking the other view. The graphics appear correct in the print preview and on a print. Please see images for a clearer understanding.I have tried turning off hardware acceleration and anti-aliasing with no change.
View 1 Replies View RelatedHow to locate the 'starting point' for hatch patterns and filled regions? I am laying the hatch in a bathroom and I want the pattern (which is representing tile) to start in a particular corner.
View 2 Replies View RelatedI am trying to find where to control the Crop Region Line. I'd love to be able to creat view templates to control visibility and also Line Weight. Currently we are turning them off per view. and only want it on for 3D View and Interior elevations.
I know that by selecting each view crop region, right clicking and overriding by element I can control the weight.
I have a drawing model where I cannot create a filled region in one sheet, but on other sheets in the same model I can. the filled region appears but does not mask anything - it is transparent. Transparency is set correctly (to zero) and I have tried bringing it to the front.
Running Revit LT 2014 with latest update.
I'm unable to select the fill region. I thought it's the invisible line not checked under VV but it is.
So what's causing the fill region that can be selected and highlighted.
Is there a way to control the color of a field region when it is exported to Autocad? I believe the boundary of the field region dictates the color of the filled region when exported to Autocad. Is there any way to override this?
View 1 Replies View Relatedi have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedLet’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
In the camera view is there a way to hide everything outside the output region, I'm finding it really hard to judge the layout with all the overlapping layers in my scene..?
View 9 Replies View RelatedI have a Floor Plan View and it was modeled up everything good displays and prints correctly (drawing 2 on the attached pdf) . I have another Floor Plan View which was create via duplicating the first one - therefore the majority of the drawing is the same. However, the filled region through the center of the duplicated view is obscuring the other modeled objects when it is printed.
The region is set to transparent (as can be seen when it is viewed on screen) the filled region has been sent to back, and the other objects are all on exactly the same layers in both documents (as they are identical apart from other noting which has nothing to do with the actual filled region).
why the filled region would be obscuring the objects in one drawing and not the other? The only way I can find to get the objects to print which are "covered" by the filled region is to turn the region off, which defeats the purpose as it is there for a reason? This happens with hard copy printing and also to pdf. Printer is set to raster printing .
Is it possible to automatically show a line over cropped elements when using crop region?
I'd like not to show the whole rectangle of the crop region, but only where that rectangle intersects an element...
Using Building Design Suite Ultimate 2014
in 2012 I was able to have filled regions with a model pattern. In 14 the bubble to change the cut fill pattern is greyed out. I need to be able to rotate a pattern so i need a model one.
View 2 Replies View RelatedI'm trying to add a hatch on a sheet , but the Filled Region button is grayed out ???
View 6 Replies View RelatedI am using Revit Architecture 2012 and I am having some issues with plan regions. I am not able to get my stairs to show up sometimes and I cannot figure out why. I have attached 2 images of my drawing to show the issue. The 2 floors in this image are a basement and lower level. I am on the basement level and the plan region cut plane is set to lower level and it is cut @ 4'. The top is lower level @ 7'-6" and the bottom and view depth are on basement @0'-0". If I turn the underlay on to show the lower level the stairs show up.
View 9 Replies View RelatedI have created a 'Title Block' family which I am wanting to use as a 'drawing stamp', being used to mark an existing drawing sheet carried forward to another phase of the project as being from the previous phase. To do this I have created a filled region with an opaque white background and a grey border (gray) to form the extent of the 'stamp'. I have then created a number of labels for the relevant information and added some lines as borders to the labels.
The problem comes when it is used on a project sheet since the label border lines do not appear. Since the commands to 'send to the back' or 'bring to the front' are absent when editing a title block I wonder why this is? Logic suggests that the only workaround is to create a number of filled regions, in jigsaw style, one for each label and to use their borders as the label borders. However, this seems an enormously long winded an probably kilobyte hungry way of achieving something that should possibly be very simple. I have to say that it may also have an easy solution that I may have used before but forgotten.
Is it possible to create a tag that read the "type" of a filled region? I've tried it many different ways and I just cant seem to get it to work.
View 2 Replies View RelatedAny trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.
View 3 Replies View Related