Revit :: Non-Rectangular Crop Region
Dec 6, 2013
We are trying to take advantage of non-rectangular crop regions and running into an issue. We are placing (2) views with non-rectangular crop regions on a sheet, one view shows existing geometry in a linked model and the other view shows new geometry in the model the sheet resides in. As a side note, we are doing this to create simplified diagrammatic phasing plans, the merits of which should be another topic. What seems to be happening, is the graphics within the rectangular boundary of the view, but outside of the crop region is masking the other view. The graphics appear correct in the print preview and on a print. Please see images for a clearer understanding.I have tried turning off hardware acceleration and anti-aliasing with no change.
View 1 Replies
ADVERTISEMENT
Jan 17, 2007
I have a large Revit model with a linked model containing many notes and symbols. The problem that I am having is that since the structure is so large I need many blow-up plans for particular zones, even though these plans are using crop regions the notes from the linked file still show outside the cropped area?
Is there any work around for this ? I have looked into scope boxes, section box, and plan regions but none of these will solve the problem.
View 3 Replies
View Related
Nov 15, 2013
I have made crop region lines to be heavy lines on elevations and it shows heavy lines on my monitor . When I created PDF file or print preview, it does not show any heavy lines of crop region lines.
View 1 Replies
View Related
Nov 1, 2012
I am trying to find where to control the Crop Region Line. I'd love to be able to creat view templates to control visibility and also Line Weight. Currently we are turning them off per view. and only want it on for 3D View and Interior elevations.
I know that by selecting each view crop region, right clicking and overriding by element I can control the weight.
View 5 Replies
View Related
Jul 11, 2013
Is it possible to automatically show a line over cropped elements when using crop region?
I'd like not to show the whole rectangle of the crop region, but only where that rectangle intersects an element...
Using Building Design Suite Ultimate 2014
View 3 Replies
View Related
Jul 30, 2009
I wonder if anyone knows how to select(crop) the same region from two different pictures. Typically we have been doing this by using the selection tool and saving the selection which we can then load into the second picture. This works great except when we need to rotate the selection box at an angle.
If we do these and then try to crop, photoshop essentially puts a box around the selection that is straight which gives extra blank spots on the edges. When you crop using the crop tool, you can crop on an angle and photoshop straightens it out fine, but I don't know how to make it crop the exact same region of the second image then.
View 1 Replies
View Related
Jul 31, 2013
As you can define a target for a lane width (for example) it would be possible to define a crop or limit? Civil 3D (2013) how much you have to improve....
View 4 Replies
View Related
May 30, 2013
I see that when I export for web, I can crop all regions whose alpha is zero. But what if I want to crop all regions whose alpha is below (say)10%? Is there a way to do that?
View 1 Replies
View Related
Jul 2, 2012
how it deals with cropped images. I have the following edited image, cropped to some specific region:
Then, I tell lightroom to edit this image in Photoshop CS4:
However, once it hits photoshop, it has magically gained more image data than I told Lightroom there should be:
Somehow, all the development settings are correct, but the crop has too much data.
View 5 Replies
View Related
Nov 28, 2012
I like to crop a scan of newspaper article to a multi edge shape (or a big rectangular on the left next to a small one right bottom). Or I want to get ride of the left upper rectangular. How do I do that in CS6?
View 8 Replies
View Related
Aug 17, 2008
Using Photoshop CS v8.0 on XP Home....
Whenever I try to use the Rectangular Marquee or Crop tools, they're stuck in a portrait style (looks like the aspect ratio of a regular sheet of paper). I can't make a square or a landscape-type rectangle. Furthermore, on the crop tool I'm not getting the handles where I can adjust the size of the crop box. When I try to make the shape bigger the top and bottom edges go completely off the canvas. This problem has happened a couple of times and usually corrects itself when I reboot, but this time it hasn't. I've probably got a setting wrong somewhere.
View 3 Replies
View Related
Apr 29, 2013
I'm trying to use the rect marquee tool to do a selection and then crop a photo but when I do nothing happens.
A couple of strange things have/are happening:
-At one point, while I was in transform selection I there was added space around the marquee, which became the new edge, as opposed to the marquee itself.
-The marquee is in the shape of a rounded rectangle.
View 2 Replies
View Related
Mar 4, 2013
and probably more, but when you consider how little functionality the loss of those three buttons give me, you can understand how little use I am getting out of CS6 so far.It makes no difference whether I use 32-bit or 64-bit.
I am using Windows 7 Home Premium on a relatively new Toshiba Satellite C660-1LD with 2.53 gigahertz Intel Core i3 M 380 with 3892 Megabytes Usable Installed Memory* with onboard Intel(R) HD Graphics.(Processor & Memory details from Belarc Advisor)
I sometimes get a message on load saying that Photoshop cannot find my 3D settings (although my Graphics card has 3D capability), but as I'm not using Photoshop's 3D editing tools, this is no issue to me at present.
View 35 Replies
View Related
Jan 22, 2014
I have a furniture object within which I have a filled region, is it possible to turn this off in a particular view?
Object attached.
View 4 Replies
View Related
Jun 18, 2013
I have an annotation tag which has a colored title bar using a colored region as a background to the title text. However having created a standard drafting detail in a 'Standard Details' project, using one of these annotation tags, when copied into a new project the color is replaced by black losing the title text in the background.
View 5 Replies
View Related
Jan 10, 2012
I have been working on a few projects where the site plans are done by the Engineer in AutoCAD. They are campus-sized site plans so to re-create them in Revit would be too time consuming. So, I am linking them into my model.
So, what I have been doing is creating several masking regions around the perimeter of the site plan in Revit in order to 'crop' the sites as necessary - I do not want to create several different site plans in CAD and bring them in separately as to avoid multiple updating when the site changes).
Is there an 'inverse' masking region where the outside of the masking region is what masks instead of the inside of the enclosed masking perimeter?
View 1 Replies
View Related
Sep 17, 2011
How to locate the 'starting point' for hatch patterns and filled regions? I am laying the hatch in a bathroom and I want the pattern (which is representing tile) to start in a particular corner.
View 2 Replies
View Related
Sep 5, 2013
I have a drawing model where I cannot create a filled region in one sheet, but on other sheets in the same model I can. the filled region appears but does not mask anything - it is transparent. Transparency is set correctly (to zero) and I have tried bringing it to the front.
Running Revit LT 2014 with latest update.
View 3 Replies
View Related
Aug 13, 2012
I'm unable to select the fill region. I thought it's the invisible line not checked under VV but it is.
So what's causing the fill region that can be selected and highlighted.
View 5 Replies
View Related
Nov 17, 2011
Is there a way to control the color of a field region when it is exported to Autocad? I believe the boundary of the field region dictates the color of the filled region when exported to Autocad. Is there any way to override this?
View 1 Replies
View Related
Nov 14, 2012
I have a Floor Plan View and it was modeled up everything good displays and prints correctly (drawing 2 on the attached pdf) . I have another Floor Plan View which was create via duplicating the first one - therefore the majority of the drawing is the same. However, the filled region through the center of the duplicated view is obscuring the other modeled objects when it is printed.
The region is set to transparent (as can be seen when it is viewed on screen) the filled region has been sent to back, and the other objects are all on exactly the same layers in both documents (as they are identical apart from other noting which has nothing to do with the actual filled region).
why the filled region would be obscuring the objects in one drawing and not the other? The only way I can find to get the objects to print which are "covered" by the filled region is to turn the region off, which defeats the purpose as it is there for a reason? This happens with hard copy printing and also to pdf. Printer is set to raster printing .
View 1 Replies
View Related
Dec 23, 2013
in 2012 I was able to have filled regions with a model pattern. In 14 the bubble to change the cut fill pattern is greyed out. I need to be able to rotate a pattern so i need a model one.
View 2 Replies
View Related
Nov 28, 2011
Is it possible to add a color region to a family in plan view? I need to add a color region to the plan view of a single flush door family for training purposes (several co-workers see color filled areas better than black and white single lines with the projector we have). I would like to add a color region to the door and frame in plan view of the door family.
View 1 Replies
View Related
Jan 21, 2013
I'm trying to add a hatch on a sheet , but the Filled Region button is grayed out ???
View 6 Replies
View Related
Sep 4, 2012
I have some sections and am using the break line with a masked region but in Revit 2013 the masked region only works in the Wireframe Graphics display option. It does not work in the Hidden Line display. It was fine in 2012
View 7 Replies
View Related
Jan 19, 2012
I am using Revit Architecture 2012 and I am having some issues with plan regions. I am not able to get my stairs to show up sometimes and I cannot figure out why. I have attached 2 images of my drawing to show the issue. The 2 floors in this image are a basement and lower level. I am on the basement level and the plan region cut plane is set to lower level and it is cut @ 4'. The top is lower level @ 7'-6" and the bottom and view depth are on basement @0'-0". If I turn the underlay on to show the lower level the stairs show up.
View 9 Replies
View Related
Feb 10, 2012
So I've created this wall section and used viewbreaks to break the crop regios up so i can fit the final view on a sheet.The problem is, when I place the broken up section on a sheet, the viewport does not break up like the view region.
How do i break up the viewport on the sheet so I can squeeze the visable regions together?
View 2 Replies
View Related
Nov 20, 2013
I have created a 'Title Block' family which I am wanting to use as a 'drawing stamp', being used to mark an existing drawing sheet carried forward to another phase of the project as being from the previous phase. To do this I have created a filled region with an opaque white background and a grey border (gray) to form the extent of the 'stamp'. I have then created a number of labels for the relevant information and added some lines as borders to the labels.
The problem comes when it is used on a project sheet since the label border lines do not appear. Since the commands to 'send to the back' or 'bring to the front' are absent when editing a title block I wonder why this is? Logic suggests that the only workaround is to create a number of filled regions, in jigsaw style, one for each label and to use their borders as the label borders. However, this seems an enormously long winded an probably kilobyte hungry way of achieving something that should possibly be very simple. I have to say that it may also have an easy solution that I may have used before but forgotten.
View 2 Replies
View Related
Jul 10, 2012
Is it possible to create a tag that read the "type" of a filled region? I've tried it many different ways and I just cant seem to get it to work.
View 2 Replies
View Related
Oct 31, 2013
I am teachnig a class on Revit and I see a new check box in the setup dialog box for printing.I did go to help file and this is what it says: "Region edges mask coincident lines. Select this option if you want the edges of masking regions and filled regions to cover lines with which they coincide. (This option is available only if the Vector Processing option is enabled.)"
View 2 Replies
View Related
Apr 26, 2013
Why masking region and filled region not working (bicome)transparent when I attach link file. If I hide the link file ,maskin region and filled region works fine. Visual style is hidden line.
View 4 Replies
View Related
