AutoCAD Dynamic Blocks :: Contents Of Attachment Doesn't Match Its File Type
Sep 4, 2013
Trying to create a dynamic block that will multiply the number of neutral and ground blocks as it's stretched.
My power terminal strips can contain 1 to unknown number of circuit breakers, and each circuit breaker requires a neutral and a ground block.
All the similar items in a stip are grouped together, all the circuit breakers, then the neutrals than the grounds.
So depending on how many circuit breakers I have I'll need the same number of neutrals and grounds, but grouped together.
In the attached block I added the stretch action to move the end cover and end stop of the strip down, but don't know how array/space/stretch the neutrals and grounds so they're grouped together.
The ciruict breakers aren't shown as they can be from different manufacturers and therefore different widths.
Tried attaching my block file but get this error message:
"The contents of the attachment doesn't match its file type."
View 9 Replies
ADVERTISEMENT
Dec 12, 2013
how can i separate same type of blocks in dynamic blocks? all layers are same..
View 9 Replies
View Related
Dec 17, 2013
I'm working on a dynamic door block, which allows me to add some height and width values to the door. everything works fine when I put in the attributes right away when I insert the block. Only if I want to mirror and stretch the block before I enter the values they want move to the correct position. After I run "attsync" it moves to it's correct place.
View 3 Replies
View Related
Jul 16, 2010
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
View 9 Replies
View Related
Feb 16, 2012
I thought for certain that justification FIT option worked for Attribute definitions.
View 5 Replies
View Related
Sep 27, 2012
I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies
View Related
May 27, 2013
What I mean:
Draw an ellipse. Skew it with mouse.
Draw a rectangle to allign with ellipse's outer dimension by Alignment Guides (not by Align and Distribute command).
Now the aligned side of the Rectangle must be tangent to the ellipse BUT it's not! To verify, try to search an intersection point. Draw a Guideline and snap it to the rectangle's aligned side. It must be intersection point between Guideline and Ellipse but there isn't...
CorelDRAW X6
View 8 Replies
View Related
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Jan 25, 2014
When I import a particuar video clip into premier, there is a problem with the audio. It plays absolutely fine until 9 minutes through when all of a sudden the audio loops back to the beginning. The video carrys on as normal untill the end of the clip but the audio starts from scratch. I have tried removing the video, renaming, moving location, starting a new project, but no matter when or how I play the video the audio starts again 9 mins through! The video plays fine in any media player except premier. I have tried exporting the video but unfortunately the audio error also gets exported. The clip is crucial to a video I'm making and can't be re-shot!
View 1 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
Aug 4, 2009
I made what seems to be a very simple dynamic block with text attributes and a few grips attached to stretch and polar stretch actions, but the file size is about 2mb! This is huge... roughly the size of one of our firm's full floor plans. There seems to be nothing purgeable in the file, so I am wondering if this is just the size necessary for the functionality or if I am bloating this somehow.
View 5 Replies
View Related
May 17, 2012
I have an xref file named Base.dwg. I need to replot a drawing (Overall_Road.dwg) which has Base.dwg as xref
I changed the line type of one layer in the Base.dwg file. Changed from DASHED2 to continuous line. Saved and closed Base.dwg
When I open Overall_Road.dwg, the line type doesn't update. I opened "Layer" window and under Linetype, it shows "Base|DASHED2".
How can I fix it to show the updated line type?
View 5 Replies
View Related
Sep 7, 2012
is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
View 2 Replies
View Related
Jun 1, 2006
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies
View Related
Aug 29, 2011
I am creating some table of contents. The first column contains symbols that are inserted blocks. Now, when I've created dynamic blocks I've made them to have more visibility states. If I insert the block that has such states, only the saved state is visible. Is there any way that I can use more visibility states when inserting some block into table.
At the moment the only solution is to insert another simplified block that I've created just for this insertion. That way my blocks library is getting bigger and bigger only because of this. I don't use simplified blocks in my drawings, except for the thingy mentioned above.
View 6 Replies
View Related
Oct 6, 2012
But I was wondering if it is possible to contol the insertion of dynamic blocks and it user definerable parameters from a excel-text file.
I am surveying a section of pipework and I need to display the brackets that are supporting the pipes. As there are numerous pipes on top of each other I have decided to show the brackets in plan and isometric view.
I think I have made the dynamic block ok and have numerous stretch/move and scale parameters working correctly.
But the only way that I can see of chaging these parameters at the momment is by manually typing them in the properties tool pallete for each individual block.
So I was thinking that if I can store the correct values that I need for each parameter in the dynamic block on our data logger along with the correct E,N,Z insertion point is it possible for this file to change the parameters in the dynamic block for example, If I have the correct insertion point stored and then have 10 parameters stored with that point for simplicity I store as A=5.00,B=8.00,C=0.100 etc and these correspond with the parameters in the dynamic block will this file be able to alter the dynamic block as the values in the excel/Text file are displayed.
View 2 Replies
View Related
Dec 31, 2013
When I try to open files - ANY files - I get an error message that AI doesn't recognize the file type. I tried importing files and received the same message. I then went back and attempted to open files that I had created with AI. NO FILES will open. I tried re-installing the program, still no dice.
View 16 Replies
View Related
Aug 25, 2011
I have to obtain a selection set of blocks (by window selection and/or single-picks if the user desires) and then an attribute value which I have previously assigned to a variable called TAGVAL to the attribute tag name called PART in that selection set of blocks.
I found a cool routine called RepAtt, but it isn't quite set up to do what I need...
(defun RepAtt (Tag / SourceBlk ValueToCopy SelSet) (vl-load-com) (if (setq SourceBlk (car (entsel "
Select Source Block:"))) (progn (mapcar '(lambda (p) (if (equal (vla-get-tagstring p) Tag) (setq ValueToCopy (vla-get-textstring p)) ) ) (vlax-invoke (vlax-ename->vla-object SourceBlk) 'GetAttributes ) ) (ssget ":L" '((0 . "INSERT") (66 . 1))) (vlax-for DesBlock (setq SelSet (vla-get-activeselectionset (vla-get-activedocument (vlax-get-acad-object)) ) ) (foreach att (vlax-invoke DesBlock 'GetAttributes) (if (equal (vla-get-tagstring att) Tag) (vla-put-textstring att ValueToCopy) ) ) ) (vla-delete SelSet) ) ) ) (RepAtt "WIDGET");<-- Tag Name
View 1 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Nov 7, 2011
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
View 4 Replies
View Related
Feb 15, 2012
usage of dynamic title blocks with visiblity states and defining page setup override templates which use same for quick plotting using sheet sets.
I have attached a simple dynamic block that I built which is the outter frame of our company title block, it is designed to allow users to quickly switch between Landscape and Portrait orientations.
The problem I am having is when I go to define page setups for my Sheet Set Page Setup Override Template I am unable to use the "Extents" option with auto-center because the "Extents", as defined by the page setup, includes ALL objects in the paper space regardless of visibility, so my title block ends up being centered in a stupid way if that printing configuration is used.
The only solution I have found is to use the "Layout" option when defining page setups, but this option produces other issues in other ways when printing. I don't want to use the "Window" option either for the potential for users to be using the page setup overrides to print drawings using different paper sizes or drawings that were not originally created using the current template the override is designed to accomodate.
Is there perhaps a system variable that defines whether invisible objects are included in the "Extents" setting in the page setup? I'm sure you'll all agree that Extents is the way to go in this situation, but it is not performing exactly as required.
View 5 Replies
View Related
Mar 26, 2012
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
View 4 Replies
View Related
Sep 18, 2013
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
View 1 Replies
View Related
Feb 4, 2011
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
View 9 Replies
View Related
Oct 11, 2012
What is the variable to change the dynamic grip parameter size and color.
View 3 Replies
View Related
